Occurrence and chemical composition of amphiboles and related minerals in corundum-bearing mafic rock from the Horoman Peridotite Complex, Japan

A corundum-bearing mafic rock in the Horoman Peridotite Complex, Japan, was derived from upper mantle conditions to lower crustal conditions with surrounding peridotites. The amphiboles found in the rock are classified into 3 types: (1) as interstitial and/or poikilitic grains (Green amphibole), (2) as a constituent mineral of symplectitic mineral aggregates with aluminous spinel at grain boundary between olivine and plagioclase (Symplectite amphibole) and (3) as film-shaped thin grains, usually less than 10 μm in width, at grain boundary between olivine and clinopyroxene (Film-shaped amphibole). The Film-shaped amphibole is rarely associated with orthopyroxene extremely low in Al₂O₃, Cr₂O₃ and CaO (Low-Al OPX). These minerals were formed by infiltration of SiO₂- and volatile-rich fluids along grain boundaries after the rock was recrystallized at olivine-plagioclase stability conditions, i.e. the late stage of the exhumation of the Horoman Complex.

Chondrite-normalized rare earth element patterns and primitive mantle-normalized trace-element patterns of the Green amphibole and clinopyroxene are characterized by LREE-depleted patterns with Eu positive and negative anomalies of Zr and Hf. These geochemical characteristics of the constituent minerals were inherited from original whole-rock compositions through a reaction involving both pre-existing clinopyroxene and plagioclase. We propose that the fluids were originally rich in a SiO₂ component but depleted in trace-elements. Dehydration of the surrounding metamorphic rocks in the Hidaka metamorphic belt, probably related to intrusion of hot peridotite body into the Hidaka crust, is a plausible origin for the fluids.     

Upper and middle crustal deformation of an arc–arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.     

Analysis software for upper atmospheric data developed by the IUGONET project and its application to polar science

To comprehensively understand the Arctic and Antarctic upper atmosphere, it is often crucial to analyze various data that are obtained from many regions. Infrastructure that promotes such interdisciplinary studies on the upper atmosphere has been developed by a Japanese inter-university project called the Inter-university Upper atmosphere Global Observation Network （1UGONET）. The objective of this paper is to describe the infrastructure and tools developed by IUGONET. We focus on the data analysis software. It is written in Interactive Data Language （IDL） and is a plug-in for the THEMIS Data Analysis Software suite （TDAS）, which is a set of IDL libraries used to visualize and analyze satellite- and ground-based data. We present plots of upper atmospheric data provided by IUGONET as examples of applications, and verify the usefulness of the software in the study of polar science. We discuss IUGONET＇s new and unique developments, i.e., an executable file of TDAS that can run on the IDL Virtual Machine, IDL routines to retrieve metadata from the IUGONET database, and an archive of 3-D simulation data that uses the Common Data Format so that it can easily be used with TDAS.     

Mantle hornblendites of Naein ophiolite (Central Iran): Evidence of deep high temperature hydrothermal metasomatism in an upper mantle section

The Naein ophiolite is the most complete ophiolitic exposure in Cental Iran and considered as a remnant of the Mesozoic Central East Iranian microcontinent (CEIM) confining oceanic crust. In the northeastern part of this ophiolite (Darreh Deh area) within the mantle peridotites, a few hundred meters below the top of the Moho transition zone (MTZ), the hornblendites are present as dykes (former cracks and joints) from a few millimeters to nearly 50 cm wide. They have sharp boundaries with the surrounding mantle harzburgites and dunites. These hornblendites are pale green and coarse-grained in hand specimen and composed of magnesio-hornblende (Mg# = 0.93), chlorite (penninite and clinochlore, Mg# = 0.95), Cr-spinel (chromite, Cr# = 0.67 and Mg# = 0.55), tremolite, calcite and dolomite. Tremolites were formed by retrograde metamorphism of hornblendes. Calcite and dolomite occur as late-stage veins. Very high amount of primary hydrous phases (~94 vol % hornblende and chlorite), as well as peculiar mineralogical and chemical characteristics of the Naein ophiolite mantle hornblendites, do not match a magmatic origin. They are possibly products of the reaction between mantle peridotites and seawater-originated supercritical fluids, rich in silicate components. The presence of primary hydrous phases (hornblende and chlorite) may reveal high activity of H₂O in the involved solution. The chemical composition of chromite in the hornblendites is near to the average chromite composition from the surrounding harzburgite and dunite. This suggests that the main source of Cr should be chromites of nearby peridotites, which were totally or partly dissolved by hydrothermal fluids. The positive anomaly of Eu in the chondrite-normalized REE patterns of hornblendes, high modal abundance of Ca-rich hornblende, as well as presence of calcite and dolomite, point to seawater ingression through the gabbros in to the uppermost mantle peridotites. The higher value of MgO than CaO, presence of high-Cr chromite and Cr-enrichment of hornblendes and chlorites indicate a higher contribution of peridotites rather than gabbros to the chemical characteristics of the involved fluids. This study shows that circulation of possibly seawater-derived high temperature hydrous fluids in the upper mantle can leach and provide necessary elements to form hornblendite in joints and cracks of the uppermost mantle.     

Mass Concentration and Mineralogical Characteristics Aerosol Particles Collected at Dunhuang During ACE-Asia

Measurements were performed in spring 2001 and 2002 to determine the characteristics of soil dust in the Chinese desert region of Dunhuang, one of the ground sites of the Asia-Pacific Regional Aerosol Characterization Experiment (ACE-Asia). The mean mass concentrations of total suspended particle matter during the spring of 2001 and 2002 were 317 μg m-3 and 307 μg m-3, respectively. Eleven dust storm events were observed with a mean aerosol concentration of 1095 μg m-3, while the non-dusty days with calm or weak wind speed had a background aerosol loading of 196 μg m-3 on average in the springtime.The main minerals detected in the aerosol samples by X-ray diffraction were illite, kaolinite, chlorite, quartz,feldspar, calcite and dolomite. Gypsum, halite and amphibole were also detected in a few samples. The mineralogical data also show that Asian dust is characterized by a kaolinite to chlorite (K/C) ratio lower than 1 whereas Saharan dust exhibits a K/C ratio larger than 2. Air mass back-trajectory analysis show that three families of pathways are associated with the aerosol particle transport to Dunhuang, but these have similar K/C ratios, which further demonstrates that the mineralogical characteristics of Asian dust are different from African dust.     

SPATIO-TEMPORAL STRESS FIELD VARIATION IN THE CENTRAL LONGMENSHAN FAULT ZONE AFTER THE 2008 WENCHUAN EARTHQUAKE FROM FOCAL MECHANISM SOLUTIONS OF SMALL EARTHQUAKES

We determined the focal mechanism solutions(FMS)of aftershocks of the 2008 Wenchuan earthquake using the waveform data recorded by the Western Sichuan movable seismic array. We further obtained the spatio-temporal variation of the stress field by inverting the stress tensors from these data. The results show that the FMSs of the small earthquakes are primarily reverse faulting with considerable number of normal and strike-slip. The proportion of reverse type earthquakes clearly increases with time, and the spatial distribution of the FMSs is closely related with local geology and the characteristics of the deep faults. The stress tensor inversion results reveal that the orientations of the maximum horizontal compressive stress(S_H)shortly after the mainshock in each area are mainly in EW to NWW-SEE directions, while in the area along Xiaoyudong-to-Lixian aftershock branch it is in NE-SW direction in shallow crust. This implies that the stress field at the early stage after the Wenchuan earthquake is mainly controlled by the dynamic stress change caused by the rupture propagation, and the conspicuous factor determining the S_H direction is the characteristics of the rupture plane. Temporal variations of the stress tensors show that the stress regimes at depth changed from a mixture of reverse and strike-slip faulting to pure reverse, implying that local Coulomb stress caused by the main shock is released through strike-slip faulting and gradually recovers into the background stress field. The change of stress in the shallow subsurface follows that in the deep subsurface with observable time delay.     

Crustal anatexis and formation of two types of granitic magmas in the Kontum massif, central Vietnam: Implications for magma processes in collision zones

Asia grew in the Late Permian by the collision of a number of micro-continents. Syn- to post-collisional magmatism occurred along the continental collision zones . In this study, we report two types of granitic rocks, garnet granite (Grt granite) and orthopyroxene granite (Opx granite), from the Kontum massif, central Vietnam, which is situated on the continental collision zone between the South China and Indochina cratons. These granitic rocks were formed at ca. 250 Ma when high-temperature (HT) and ultrahigh-temperature (UHT) metamorphism took place in the same zone. Based on the petrological and geochemical features compared with previously reported experimental results, garnet-bearing granite is derived from pelitic gneisses by partial melting, whereas orthopyroxene-bearing granite is produced by the partial melting of garnet-bearing mafic granulites. We inferred that a significantly high-geothermal gradient is required to produce Vietnamese granitic magmatism and related HT to UHT metamorphism. This geotherm may be attributed to upwelling mantle plume beneath the Kontum massif during the Late Permian.     

Fracture-zone conditions on a recently active fault: insights from mineralogical and geochemical analyses of the Hirabayashi NIED drill core on the Nojima fault, southwest Japan, which ruptured in the 1995 Kobe earthquake

An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H₂O+ and CO₂ had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H₂O+ and CO₂, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H₂O+ and CO₂ were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.     

CaPtO3 as a novel post-perovskite oxide

Structural, morphological, magnetic, and thermal properties have been investigated for a novel post-perovskite oxide CaPtO₃ synthesized under high pressure. By comparing obtained structural parameters with those for known post-perovskite compounds, we argue that the chemical bond has a strong covalent character. Precise measurements of the Langevin susceptibility χ ₀ = −9.6 × 10⁻⁵ emu/mol and Debye temperature θ ∼ 470 K provide a good opportunity to confirm the reliability of first-principle calculations on predicting physical properties of the Earth’s D” layer.