Heat transfer coefficients of natural volcanic clasts

Heat transfer coefficients used in numerical simulations of volcanic eruptions are typically borrowed from industrial settings where the coefficients are well determined for non-permeable, machined (spherical) materials. Volcanic clasts, in contrast, are permeable and have irregular shapes. We performed a series of laboratory experiments to determine heat transfer coefficients for natural volcanic particles. We measured the surface and interior temperatures during cooling at wind speeds ranging from 0 to 10 m/s. We also measured the permeability and density of the particles. We find that the permeability of the particles has little effect on clast cooling. In the absence of any wind, heat loss occurs by free convection, and we find no relationship between the heat transfer coefficient and particle density. However, for non-zero Reynolds numbers (finite wind speed), the heat transfer coefficient decreases with increasing porosity. We obtain a correlation for the dimensionless heat loss, or Nusselt number, of the form Nu = 2 + aRe^1/2Pr^1/3 where a is a density dependent coefficient given by a = 0.00022ρ + 0.31, with ρ in kg/m³, and Re and Pr are the Reynolds number and Prandtl number, respectively. Compared with non-porous particles, heat transfer coefficients for natural pumice clasts are reduced by a factor of 2–3 for particles with similar Re. Numerical simulations show that this leads to an increase in depositional temperature by 50–90 °C.     

Characterization of complex groundwater flows in the environment of singular buildings by combining hydrogeological and non-destructive geophysical (ground-penetrating radar) techniques: Punta Begoña Galleries (Getxo,Spain)

Locating and quantifying groundwater flow in many built-up areas are a priority with regard to its complete restoration. In this work, a hydrogeological survey of the surroundings of the Punta Begoña Galleries (Getxo, Bizkaia), built on a coastal cliff, was completed by using ground penetrating radar (GPR) testing. Thus, the preliminary characterization of soils and rocks in accessible areas of the cliff was first improved by hydrogeological information gathered from a single survey borehole, including permeability measurements by low pressure injection tests (LPTs) and continuous water level monitoring. As a complementary method, the non-destructive GPR technique was performed during both dry and wet hydrological periods and in tandem with the injection tests, providing more complete spatial and temporal images of water flows. Specifically, GPR allows mapping of flow paths in soils and assessing the continuity of fractures in rock masses. Altogether, this complementary approach provides greater knowledge of complex underground flow dynamics in built environments, thus making it easier to make decisions for their management.     

Magnetic particles in atmospheric particulate matter collected at sites with different level of air pollution

Magnetic measurements of deposited atmospehric dust can serve as an additional parameter in assessing environmental pollution. This method is based on the assumption that atmospherically deposited particles contain significant portion of ferrimagnetic iron oxides of anthropogenic origin, which can be easily detected. Aim of this paper is to identify clearly magnetic fraction of daily samples of particulate matter less than 10 μm (PM10), routinely used for air quality assessment and monitoring. We used combination of thermomagnetic analyses and other physical and chemical methods, including scanning electron microscopy (SEM) and Mössbauer spectroscopy. Our results show that daily samples of PM10, collected at sites with different degree of atmospheric pollution, contain magnetite of spherical shape, which is presumably of industrial origin. Thus, magnetic methods can be applied directly to the same substances, which are used routinely in air quality assessment and monitoring.     

Preliminary Interlaboratory Trial for ISO/DIS 12010: Determination of Short Chain Polychlorinated Alkanes (SCCP) in Water

A first preliminary interlaboratory trial was planned to prepare ISO/DIS 12010: Water quality – determination of short chain polychlorinated alkanes (SCCP) in water – method using GC/MS and electron capture negative ionisation (ECNI). The task was to determine the sum of short chain polychlorinated n‐alkanes with carbon chain lengths of C₁₀–C₁₃ and a chlorine content between 49 and 67% in water by GC‐ECNI‐MS and quantification by multiple linear regression described in ISO/DIS 12010 as the compulsory method. Distributed samples were obtained from a real water extract spiked with a target concentration of 0.4 µg/mL sum of SCCP, i.e. the environmental quality target level according to the Water Framework Directive. The interlaboratory trial included the calibration, a column chromatographic clean up, a concentration step and an integration of chromatographic unresolved humps as well as the quantification with multiple linear regression. Reproducibility standard deviations between 21.5 and 22.9% were achieved by 17 participating laboratories from four countries. The method outlined no significant difference of the results between the standard solution and a real water matrix extract. On the basis of this succeeded preliminary interlaboratory trial the final interlaboratory trial for validation of ISO 12010 was prepared in autumn 2010.     

A mechanism for anomalous decline in radon precursory to an earthquake

Mechanisms for interpreting anomalous decreases in radon in ground water prior to earthquakes are examined with the help of a case study to show that radon potentially is a sensitive tracer of strain changes in the crust preceding an earthquake. The 2003 Chengkung earthquake of magnitude (M) 6.8 on December 10, 2003, was the strongest earthquake near the Chengkung area in eastern Taiwan since 1951. The Antung radon-monitoring station was located 20 km from the epicenter. Approximately 65 d prior to the 2003 Chengkung earthquake, precursory changes in radon concentration in ground water were observed. Specifically, radon decreased from a background level of 780 pCi/L to a minimum of 330 pCi/L. The Antung hot spring is situated in a fractured block of tuffaceous sandstone surrounded by ductile mudstone. Given these geological conditions, we hypothesized that the dilation of brittle rock mass occurred at a rate faster than the recharge of pore water and gas saturation developed in newly created cracks preceding the earthquake. Radon partitioning into the gas phase may explain the anomalous decrease of radon precursory to the 2003 Chengkung earthquake. To support the hypothesis, vapor-liquid, two-phase radon-partitioning experiments were conducted at formation temperature (60 degrees C) using formation brine from the Antung hot spring. Experimental data indicated that the decrease in radon required a gas saturation of 10% developed in rock cracks. The observed decline in radon can be correlated with the increase in gas saturation and then with the volumetric strain change for a given fracture porosity.     

Which way to the Moon?

Andrew Ball and Ian Crawford report on NASA's planning for a return to the Moon, with some thoughts on opportunities open to the UK.     

Runup uncertainty on planar beaches

Parameterization of wave runup is of paramount importance for an assessment of coastal hazards. Parametric models employ wave (e.g., H_s and L_p) and beach (i.e., β) parameters to estimate extreme runup (e.g., R_2%). Thus, recent studies have been devoted to improving such parameterizations by including additional information regarding wave forcing or beach morphology features. However, the effects of intra-wave dynamics, related to the random nature of the wave transformation process, on runup statistics have not been incorporated. This work employs a phase- and depth- resolving model, based on the Reynolds-averaged Navier-Stokes equations, to investigate different sources of variability associated with runup on planar beaches. The numerical model is validated with laboratory runup data. Subsequently, the role of both aleatory uncertainty and other known sources of runup variability (i.e., frequency spreading and bed roughness) is investigated. Model results show that aleatory uncertainty can be more important than the contributions from other sources of variability such as the bed roughness and frequency spreading. Ensemble results are employed to develop a new parametric model which uses the Hunt (J Waterw Port Coastal Ocean Eng 85:123–152, 1959) scaling parameter \(\beta \left (H_{s}L_{p}\right )^{1/2}\).

     

On the Integrability of Limited-Area Numerical Weather Prediction Model ALADIN over Extended Time Periods

This note summarizes results of the first integration of regional numerical weather prediction model ALADIN in a climate mode. The ALADIN model, developed in an international cooperation led by Météo France, is operationally used for weather prediction. The grid step of the model is 12 km; the integration domain covers a major part of Europe. A one-month-long run has been performed with this model on observed boundary conditions (represented by assimilations by the global model ARPEGE). It is demonstrated that no excessive error is generated and accumulated in the model during the integration; hence the model is integrable for extended time periods and may serve a basis for a development towards a regional climate model.