Chemosynthetic trophic support for the benthic community at an intertidal cold seep site at Mocha Island off central Chile

We analyzed C and N stable isotope ratios of benthic fauna and their potential food sources at an intertidal methane seep site and a control site without emanation at Mocha Island (central Chile). The objective was to trace the origin of the main food sources used by the local heterotrophic fauna, based on the hypothesis that chemosynthetic production could be partially fueling the local food web at the seep site. Food sources sampled at both sites included macroalgae, particulate organic matter and bacteria-like filaments found growing over the red algae Gelidium lingulatum within the areas of active methane release.     

Dynamical downscaling of future sea level change in the western North Pacific using ROMS

The future regional sea level (RSL) rise in the western North Pacific is investigated by dynamical downscaling with the Regional Ocean Modeling System (ROMS) with an eddy-permitting resolution based on three global climate models—MIROC-ESM, CSIRO-Mk3.6.0, and GFDL-CM3—under the highest greenhouse-gas emission scenario. The historical run is forced by the air-sea fluxes calculated from Coordinated Ocean Reference Experiment version 2 (COREv2) data. Three future runs—ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL—are forced with an atmospheric field constructed by adding the difference between the climate model parameters for the twenty-first and twentieth century to fields in the historical run. In all downscaling, the RSL rise along the eastern coast of Japan is generally half or less of the RSL rise maxima off the eastern coast. The projected regional (total) sea level rises along the Honshu coast during 2081–2100 relative to 1981–2000 are 19–25 (98–104), 6–15 (71–80), and 8–14 (80–86) cm in ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL, respectively. The discrepancies of the RSL rise along the Honshu coast between the climate models and downscaling are less than 10 cm. The RSL changes in the Kuroshio Extension (KE) region in all downscaling simulations are related to the changes of KE (northward shift or intensification) with climate change.     

Geoarchaeological evidence on a Late Bronze Age earthquake,Ohrid Basin (North Macedonia)

Geoarchaeological investigations on the northeastern shore of Lake Ohrid revealed 3.5 m thick deepwater lacustrine sediments overlying terrestrial vegetation macrofossils, worked wood and abundant potsherds dated to the Late Bronze Age (LBA). Distinct contact of deepwater sediment with the sub-aerial weathered limestone bedrock point to a sudden increase in lake level. According to radiocarbon data, catastrophic flooding occurred shortly after 1214 yr bc. Because the area is located in a highly active seismic zone, we propose that this event was caused by tectonically induced, metre-scale coseismic subsidence related to faults bordering the Ohrid alluvial plain. Moreover, this event coincides well with a dramatic switch in the habitation and settlement strategy in the region. More important, however, is the finding that the age of the proposed massive tectonic event and change in habitation lies within the interval of the proposed ‘earthquake storm’ in the eastern Mediterranean dated to 1225–1175 bc. As the Ohrid-Korça zone belongs to the same tectonic province, a relationship between the abovementioned earthquakes and the proposed event can be expected. This research therefore might provide the first direct evidence of a large-scale earthquake event linkable to the LBA collapse of Europe's first urban civilisation in the Aegean.     

Deep seismically active fracture zones in ecuador and northern peru

Summary A system of 8 seismically active fracture zones was delineated on the basis of the distribution of earthquake foci in the continental lithosphere of Ecuador. The position and width of the outcrop, thickness, dip and maximum depth of the individual fracture zones were estimated and correlated with surface geological and tectonic phenomena, volcanism and hydrothermal manifestations. The existence and strike of the fracture zones was independently confirmed by the occurrence of historical disastrous earthquakes.

---

uma 8 uu amu a a aa a auu an¶rt;u a mu muma um a¶rt;a. u n¶rt; nu u uua a nmu, mua, u auaaua m¶rt; a . mau mu auu n¶rt;m¶rt;am a¶rt;u umuu aum mu u nmau nmu, mmu, au uu¶rt;mau nuu.

---

---

Visiting professors at Instituto Geofísico and Facultad de Geología, Minas y Petróleos, Escuela Politécnica Nacional, Quito (Ecuador).     

Generalized plasticity state parameter‐based model for saturated and unsaturated soils. Part 1: Saturated state

The behavior of granular materials is known to depend on its loose or dense nature, which in turns depends both on density and confining pressure. Many models developed in the past require the use of different sets of constitutive parameters for the same material under different confining pressures. The purpose of this paper is to extend a basic generalized plasticity model for sands proposed by Pastor, Zienkiewicz and Chan by modifying the main ingredients of the model flow—rule, loading–unloading discriminating direction and plastic modulus—to include a dependency on the state parameter. The proposed model is tested against the available experimental data on three different sands, using for each of them a single set of material parameters, finding a reasonably good agreement between experiments and predictions. Copyright © 2010 John Wiley & Sons, Ltd.     

Experimental investigation of turbulent processes in a complex terrain

In the present paper the first results of the international KOPEX-86 experiment are presented. The experiment took place at the Kopisty Atmospheric Observatory of the Institute of Physics of the Atmosphere in Prague as part of a special project of the Commission of the Academy of Sciences in Planetary Geophysics (KAPG) in June and July 1986. Using 4 ultrasonic anemometers at 4 levels up to 80 m, Doppler-SODAR and wind-, temperature- and radiation balance gradients from 2 to 80 m, a complex investigation of the atmospheric boundary layer in an industrial area was made. The authors present the first results of

Estimating ventilation time scales using overturning stream functions

A simple method for estimating ventilation time scales from overturning stream functions is proposed. The stream function may be computed using either geometric coordinates or a generalized vertical coordinate, such as potential density (salinity in our study). The method is tested with a three-dimensional circulation model describing an idealized semi-enclosed ocean basin ventilated through a narrow strait over a sill, and the result is compared to age estimates obtained from a passive numerical age tracer. The best result is obtained when using the stream function in salinity coordinates. In this case, the reservoir-averaged advection time obtained from the overturning stream function in salinity coordinates agrees rather well with the mean age of the age tracer, and the corresponding maximum ages agree very well.     

Growth of multilayered polycrystalline reaction rims in the MgO–SiO<Subscript>2</Subscript> system,part II: modelling

Part I of this contribution (Gardés et al. in Contrib Mineral Petrol, 2010) reported time- and temperature-dependent experimental growth of polycrystalline forsterite-enstatite double layers between single crystals of periclase and quartz, and enstatite single layers between forsterite and quartz. Both double and single layers displayed growth rates decreasing with time and pronounced grain coarsening. Here, a model is presented for the growth of the layers that couples grain boundary diffusion and grain coarsening to interpret the drop of the growth rates. It results that the growth of the layers is such that (Δx)² ∝ t ^1−1/n , where Δx is the layer thickness and n the grain coarsening exponent, as experimentally observed. It is shown that component transport occurs mainly by grain boundary diffusion and that the contribution of volume diffusion is negligible. Assuming a value of 1 nm for the effective grain boundary width, the following Arrhenius laws for MgO grain boundary diffusion are derived: log D _gb,0^Fo (m²/s) = −2.71 ± 1.03 and E _gb^Fo = 329 ± 30 kJ/mol in forsterite and log D _gb,0^En (m²/s) = 0.13 ± 1.31 and E _gb^En = 417 ± 38 kJ/mol in enstatite. The different activation energies are responsible for the changes in the enstatite/forsterite thickness ratio with varying temperature. We show that significant biases are introduced if grain boundary diffusion-controlled rim growth is modelled assuming constant bulk diffusivities so that differences in activation energies of more than 100 kJ/mol may arise. It is thus important to consider grain coarsening when modelling layered reaction zones because they are usually polycrystalline and controlled by grain boundary transport.     

Impact of ambient temperature on spring-based relative gravimeter measurements

In this paper, we investigate the impact of ambient temperature changes on the gravity reading of spring-based relative gravimeters. Controlled heating experiments using two Scintrex CG5 gravimeters allowed us to determine a linear correlation (R \(^{2}>\) 0.9) between ambient temperature and gravity variations. The relation is stable and constant for the two CG5 we used: ?5 nm/s\(^{2}/^\circ \)C. A linear relation is also seen between gravity and residual sensor temperature variations (R \(^{2}>\) 0.75), but contrary to ambient temperature, this relation is neither constant over time nor similar between the two instruments. The linear correction of ambient temperature on the controlled heating time series reduced the standard deviation at least by a factor of 2, to less than 10 nm/s\(^{2}\). The laboratory results allowed for reprocessing the data gathered on a field survey that originally aimed to characterize local hydrological heterogeneities on a karstic area. The correction of two years of monthly CG5 measurements from ambient temperature variations halved the standard deviation (from 62 to 32 nm/s\(^{2}\)) and led us to a better hydrological interpretation. Although the origin of this effect is uncertain, we suggest that an imperfect control of the sensor temperature may be involved, as well as a change of the properties of an electronic component.     

Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.