http://www.sciencedirect.com/science/article/pii/S167498711400067X

The Proterozoic Bamble Sector, South Norway, is one of the world＇s classic amphiboliteto granulite- facies transition zones. It is characterized by a well-developed isograd sequence, with isolated ＇granulite-facies islands＇ in the amphibolite-facies portion of the transition zone. The area is notable for the discovery of C02-dominated fluid inclusions in the granolite-facies rocks by Jacques Touter in the late 1960＇s, which triggered discussion of the role of carbonic fluids during granulite genesis. The aim of this review is to provide an overview of the current state of knowledge of the Bamble Sector, with an emphasis on the Arendal-Froland-Nelaug-Tvedestrand area and off shore islands （most prominantly Tromay and Hisoy） where the transition zone is best developed. After a brief overview of the history of geological research and mining in the area, aspects of sedimentary, metamorphic and magmatic petrology of the Bamble Sector are discussed, including the role of fluids. Issues relevant to current geotectonic models for SW Scandinavia, directly related to the Bamble Sector, are discussed at the end of the review.     

Bioremediation of dry olive-mill residue removes inhibition of growth induced by this waste in tomato plants

The disposal of dry olive-mill residue, the waste product from olive oil production, is a serious environmental issue. Dry olive-mill residue, being rich in organic and inorganic nutrients, could be used as fertilizer; however, it contains phenolic compounds that can inhibit plant growth. In order to clarify whether bioremediation of this waste could be a valuable strategy for its reuse, the effect of aqueous extract of dry olive-mill residue, untreated or bioremediated by the saprobe fungi Coriolopsis rigida and Penicillium chrysogenum-10, has been analyzed in relation to some physiological parameters of tomato plants. The data show that aqueous dry olive-mill residue significantly reduces the biomass of roots and shoots. In particular, it causes a dramatic reduction in root length, area, and volume as well as in the number of root tips. At an early stage, aqueous dry olive-mill residue also reduces the content of chlorophyll a and b and the efficiency of PS II. The inhibition of growth seems to be due to the increase in phenolic compounds that induce oxidative stress. Interestingly, when plants are treated with aqueous dry olive-mill residue bioremediated by saprobe fungi a decrease in phenolic content and an alleviation of oxidative stress occur. In conclusion, the results show that bioremediation of aqueous dry olive-mill residue is a useful tool to remove most of the inhibiting effects of this waste on plant growth.     

Effect of the injection of pure oxygen into a membrane bioreactor on the elimination of bisphenol A

The effect of the injection of pure oxygen instead of air in a membrane bioreactor for the elimination of bisphenol A is investigated. A dynamic experiment was developed in a pilot plant where the aerobic reactor was continuously spiked with 1 mg L^?1 of bisphenol A. Air was injected for 10 days and then pure oxygen was injected for another 10 days. The bisphenol A concentration was determined in aqueous phases and activated sludge using simple and sensitive analytical methods based on different extraction procedures and liquid chromatography tandem mass spectrometry analysis. Enzymatic activity was also determined and toxicity tests were performed to discard that the spiked bisphenol A concentration could negatively affect the microorganisms in the bioreactor and, thus, the membrane bioreactor performance. The effluent bisphenol A concentration increased up to 0.26 mg L^?1 after 4 days in the air injection treatment, and up to 0.48 mg L^?1 after only 12 h in the oxygen injection treatment. In both cases, this was followed by a decrease in concentration despite the continuous spiking of bisphenol A into the bioreactor. In presence of pure oxygen, bisphenol A concentration reached background levels (below the limit of quantification) after 5 days. In contrast, when using air a total of 10 days were required to reach background levels. The injection of pure oxygen instead of air is an important innovation in wastewater treatment, allowing permanent elimination of organic contaminants, avoiding their return to the environment and ensuring the safety of water.     

A critical evaluation of using bulk sediment instead of fine fraction in environmental marine studies, investigated on example of Rijeka harbor, Croatia

This work tested the preferential use of fine (<63 μm) or bulk sediment (<2 mm) in environmental research of marine sediments in the Eastern Adriatic. Fine fraction sediment containing silt and clay (<63 μm), predominating in the studied area, was examined to evaluate past and present anthropogenic inputs and to test our hypothesis that investigation of bulk sediment should be preferred. Following aqua regia digestion, chemical analyses of 58 elements were performed by ICP/OES, ICP-MS and cold vapor AAS, and statistical analysis was performed. The concentrations of the majority of the analyzed elements increased with age of the sediment, except for Ag and Sn, which had higher concentrations in recent sediments. The previous main sources of metal contamination in Rijeka harbor were now abandoned municipal-sewage outflow and oil refinery, and continuing harbor activities and antifouling paint use. All activities except of antifouling paint use have been decreasing significantly. Anomalies of selected elements were determined by the box-plot method. More anomalies were found in the bulk sediment than in the fine fraction. Results of Q-modality clustering and factor analysis in the fine fraction almost correlate with that applied on bulk sediments. Thus, it can be said that the differences between the element distribution in the bulk and fine fraction are not statistically significant. Our conclusion is that analysis of bulk marine sediment gives a better insight into the state of pollution and supports previous recommendations to use bulk sediment as a chosen media for environmental studies.     

Analysis of the correlations between freeze–thaw and salt crystallization tests

Two of the most popular weathering tests used for dimension stone are EN 12371 freeze–thaw (FT) and EN 12370 Salt Crystallization (SC). These tests are used to assign a durability value to the rocks. Both tests are based on the cyclical growth of crystals in the porous system of the rock, which causes structural stress on the rock matrix that may affect its integrity. The weathering mechanism is the same in both tests although the rate of volume increase is higher for the salt crystals. Due to this similarity, the two tests provide complementary information. The EN (European Norms) recommend evaluating the results together, but do not establish correlations between the results of these two tests for different types of rocks. Knowing these relationships would improve the understanding of the results and the response to weathering of the rock once placed in a building. In this work, several ornamental rocks (sandstones, limestones, dolostones, and a travertine) from the Iberian Peninsula were submitted to FT and SC tests. Rocks were mineralogically and petrographically characterized, and their porous systems were defined by a combination of techniques (scanning electronic microscopy, digital images analysis, and mercury porosimetry). The results of the tests were quantified numerically to compare them. The velocity of propagation of ultrasonic waves was measured before and after the tests. After the statistical analysis, significant correlations were found between the FT and SC tests, and between the connected porosity and the durability index of the rocks.     

Technical, financial and location criteria for the design of land application system treatment

Conventional water treatments when downsized to cover the demands of small and scattered populations are costly and ineffective. In fact, many small towns cannot afford the high average treatment costs nor provide the skill and complex management requirements. Even when these facilities are available, waste water might not be properly treated. Land application system treatments (LAST) have been shown to be preferable on the basis of their technical effectiveness and financial viability. The recently approved Spanish regulations (RDL 1620/2007, pp 50369–50661) represent an opportunity for the implementation of well-designed LASTs. This paper presents an assessment methodology for the design of LASTs by combining technical, financial and location criteria. The method is applied to the design of LASTs to cover the water disposal demand of twelve municipalities located within the protected natural landscape, and surrounding areas of ‘El Rebollar’, Salamanca, Spain.     

Building a 3D geomodel for water resources management: case study in the Regional Park of the lower courses of Manzanares and Jarama Rivers (Madrid, Spain)

Water resources management of protected sites requires a powerful tool to analyze the process and changes that are occurring in the environment. This paper describes a 3D geomodel design of the Jarama River Detrital Aquifer located in Madrid (Spain). That hydrogeological unit is included in the “Parque Regional de los Cursos Bajos de los Ríos Manzanares y Jarama” (Regional Park of the Lower Courses of Manzanares and Jarama Rivers). The goal of this work is to define a method by which a three-dimensional (3D) model can be created with hydrogeologic geometry real of main aquifer, to accomplish an adequate management of the groundwater resources. All data used in this study were integrated in a geographic database: geological and hydrogeological information, geological map (1:25,000), eleven cross-sections, piezometric maps and a digital elevation model. The constructed 3D model of the Jarama Aquifer shows geometric features and spatial distribution and variations of geologic units. Thus, the 3D model allows the assessment of volumes of each unit, the depth and thickness variations of the main aquifer, and the spatial and temporal variations of water tables. From the 3D model, the most suitable areas (in terms of groundwater protection) for managed recharge and mining works have been identified.     

3D modeling and monitoring of karst system as a base for its evaluation and utilization: a case study from eastern Serbia

Beljanica Mountain in eastern Serbia is a part of the Carpathian Balkan arch (northern Alpine branch). It covers an area of about 300 km² and consists mostly of Jurassic and Cretaceous limestones. Numerous surface karst features, long caves and several large karstic springs located in Beljanica’s piedmont along the contact of karstic and non-karstic rocks are all indicators of an intense karstification. Currently, the large karstic water reserves of Beljanica Mountain are not properly utilized because of their distance from main consumers, the objection by national water managers that the springs lack a stable and sufficient discharge particularly during recession periods. Due to its unpolluted and high quality water, the area is a great prospect for future water supply, and provides an opportunity for artificial regulation and for the design and implementation of specific tapping structures. This paper includes an analysis of the created 3D ArcGIS model of karst interior and its correlation with historical and newly collected data of spring discharges and groundwater physico-chemical characteristics. The results of karst aquifer monitoring (both quantitative and qualitative) are linked with the results of extensive field geological and speleological survey of the upper non-saturated part of the karst (such as sinkholes, pits and caves) and with the investigation of the permanently saturated deeper part of the aquifer (including the diving methods). The model of karst interior is based on the data from the 69 caves, 15 sinks and 1,682 dolines (sinkholes) surveyed. The total length of the karst channels network, calculated using the GIS model and presented in a 3D environment, is 647 km. The catchment areas of five major springs that drain the areas are estimated to range from only 7 km² (Malo Vrelo Spring) to 124 km² (Vrelo Mlave Spring). The groundwater exploitable reserves of Beljanica karst aquifer are estimated to be over 4 m³/s. The waters are low mineralized, unpolluted and have a great potential for water supply.     

Sandstone alterations triggered by fire-related temperatures

The aim of the study was to identify and describe changes in two different sandstone types when undergoing different environmental and extreme temperature regimes to assess the possibility of finding insolation weathering and how these sandstones would behave during and after a fire. The first step was the simulation in the laboratory of temperature regimes up to 60 °C which would correspond to extreme events that could be found in insolation cycles even in Central Europe and the second one was the temperature above 200 °C simulating in laboratory conditions the thermal regime of a potential fire situation at temperatures up to 200, 400, 600 and 800 °C. Heating the samples above 400 °C led to gradual changes in mineral composition, colour, surface roughness and physical properties reaching, eventually, total rock breakdown through spalling and granular disaggregation. The different behaviour of sandstones exposed to high temperatures is mainly caused by their different mineral composition with various ratios of minerals that are more or less chemically stable at high temperatures as well as by the differences in the porosity.