湘西合仁坪金矿床硫、铅同位素地球化学

湘西柳林汊一带广泛分布钠长石_石英脉型金矿,合仁坪金矿床是其典型代表。文章对合仁坪金矿床的硫、铅同位素进行了研究,并与区域石英脉型金矿床进行对比,探讨了该矿的成矿物质来源,并初步确定了其矿床成因。研究表明,合仁坪金矿床硫化物的δ34S值范围较窄(-4.8‰~4.4‰),平均为-0.6‰,该矿床的硫为深源硫,由深部变质流体带入;铅的同位素组成较均一,并表现出明显的造山带铅的特点。结合区域成矿作用,进一步研究揭示,合仁坪金矿床为一典型的造山型金矿,其成矿可能与湘西雪峰山地区加里东期的造山作用有关。     

Occurrence,durée et intensité des précipitations simulées par deux modèles régionaux canadiens du climat sur la région du Maghreb

[Translated by the editorial staff] Simulating the precipitation regime of Northern Africa is challenging for regional climate models, particularly because of the strong spatial and temporal variability of rain events in the region. In this study we evaluate simulations conducted with two recent versions of regional climate models (RCM) developed in Canada: the CRCM5 and CanRCM4. Both are also used in the COordinated Regional Climate Downscaling EXperiment (CORDEX)-Africa. The assessment is based on the occurrence, duration, and intensity indices of daily precipitation in Maghreb during the fall and spring seasons from 1998 to 2008. We also examine the links between the North-Atlantic Oscillation (NAO) index, weather systems, and the precipitation regime over the region. During the rainy season (September to February), the CRCM5 reproduces the frequency and intensity of extreme precipitation adequately, as well as the occurrence of days with rain, while the CanRCM4 underestimates precipitation extremes. The study of links between weather systems and the precipitation regime shows that, along the Atlantic coast, precipitation (occurrence, intensity, and wet sequences) increases significantly with storm frequency in the fall. In winter, these links grow stronger going east, from the Atlantic coast to the Mediterranean coast. The negative phases of the NAO index are statistically associated with the increase in rain intensity, extremes, and accumulation along the Atlantic coast in the fall. However, the link weakens in winter over these regions and strengthens along the Mediterranean coast as the precipitation frequency rises during negative phases of the NAO. Both RCMs generally reproduce the links between the NAO and the precipitation regime well, regardless of location.     

2015年汛期气候预测先兆信号的综合分析

文章全面回顾了发布2015年汛期预测时考虑的先兆信号及其应用情况。2015年春夏季厄尔尼诺事件进一步发展,并由中部型向东部型转变,热带印度洋为一致偏暖模态发展;冬、春季北大西洋三极子为正位相;冬、春季北极海冰较常年略偏少,南极海冰偏多;冬季欧亚积雪增量略少,青藏高原积雪略多但气温偏高。通过诊断分析,认为2015年汛期预测的主导外强迫信号是太平洋厄尔尼诺事件和印度洋海温一致偏暖模态。同时参考动力气候模式的预测,在4月初的预报中,重点考虑了厄尔尼诺事件的强度和空间型变化对东亚夏季风环流的影响,有利于东亚夏季风偏弱,西太平洋副热带高压偏强偏西,季风季节内进程偏晚,我国降水呈南多北少型。在5月底的订正预报中,进一步考虑热带印度洋偏暖模态对副热带高压偏强偏西偏南的影响,以及南半球越赤道气流强度偏弱特征及对夏季风季节进程和强度的影响。经过综合分析,准确地预测了2015年东亚夏季风偏弱、我国夏季降水南多北少的布局,以及季节内主要气候事件的演变。最后对汛期气候预测存在的不足进行了初步分析和讨论。     

贵州西北部基性侵入岩锆石U-Pb年代学、岩石地球化学特征 及其与铅锌成矿关系初探

贵州西北部发育多处基性侵入岩,总体规模较小(约0.25 Km2),多沿深大断裂侵位,出露于铅锌矿点外围,本文对猫猫厂、凉山两处矿点附近的儿马冲和白岩庆两地小型基性侵入岩进行了重点研究。侵入岩主要岩性为细粒辉长岩,造岩矿物主要为拉长石、普通辉石。SiO2范围为49.60-51.09 wt%,MgO从3.88-4.27 wt %,TiO2为3.69-3.85 wt %。LA-ICP-MS锆石U-Pb定年结果为268.3±7.4 Ma,显示岩浆侵位于二叠纪。基性侵入岩的微量元素蛛网图呈OIB型特征,富集大离子亲石元素（LILE）、轻稀土元素（LREE）,亏损重稀土元素（HFEE）,相对亏损高场强元素（Nb,Ta）,有Sr、Y亏损,Pb富集。(87Sr/86Sr)i范围0.706749～0.707069,(143Nd/144Nd)i范围0.512313～0.512363,εNd(t)范围0.2～1.2;源区熔融深度处于石榴石橄榄岩相深度,可能经历了1-3 %的部分熔融,处于亏损石榴石二辉橄榄岩相向原始石榴石二辉橄榄岩相的过渡区。成岩过程中发生了单斜辉石、斜长石等矿物分离结晶,受到了有限的地壳混染作用,未经历明显的AFC过程。地壳物质在地幔源区中的加入可能是造成地幔富集的主要原因。侵入岩与成矿作用之间的关系,主要通过两方面所表现。一方面是二者间构造活动上的耦合性。另一方面是基性岩在成矿过程中可能发挥了重要的化学屏障层作用。     

利用多光谱卫星遥感和深度学习方法进行青藏高原积雪判识

青藏高原积雪对全球气候变化十分重要,针对已有积雪遥感判识方法中普遍采用的可见光与红外光谱数据易受复杂地形与高海拔影响,导致青藏高原地区积雪判识精度较低的问题,提出了一种基于多光谱遥感与地理信息数据特征级融合的积雪遥感判识方法:以风云三号卫星可见光与红外多光谱遥感资料与多要素地理信息作为数据源,由地面实测雪深数据与现有积雪产品交叉筛选出样本标签,构建并训练基于层叠去噪自编码器(SDAE)的特征融合与分类网络,从而有效辨识青藏高原遥感图像中的云、积雪以及无雪地表。经地面实测雪深数据验证,该方法分类精度显著高于使用相同数据源的FY-3A/MULSS积雪产品,略高于国际主流积雪产品MOD10A1与MYD10A1,并且年均云覆盖率最低。试验结果表明该方法可有效地减少云层对积雪判识的干扰,提升分类精度。     

历史数据和强化学习相结合的低频轨迹数据匹配算法

针对低频(采样间隔大于1min)轨迹数据匹配算法精度不高的问题,提出了一种基于强化学习和历史轨迹的匹配算法HMDP-Q,首先通过增量匹配算法提取历史路径作为历史参考经验库;根据历史参考经验库、最短路径和可达性筛选候选路径集;再将地图匹配过程建模成马尔科夫决策过程,利用轨迹点偏离道路距离和历史轨迹构建回报函数;然后借助强化学习算法求解马尔科夫决策过程的最大回报值,即轨迹与道路的最优匹配结果;最后应用某市浮动车轨迹数据进行试验。结果表明:本文算法能有效提高轨迹数据与道路匹配精度;本算法在1min低频采样间隔下轨迹匹配准确率达到了89.2%;采样频率为16min时,该算法匹配精度也能达到61.4%;与IVVM算法相比,HMDP-Q算法匹配精度和求解效率均优于IVVM算法,16min采样频率时本文算法轨迹匹配精度提高了26%。     

Generating GPS satellite fractional cycle bias for ambiguity-fixed precise point positioning

With the development of precise point positioning (PPP), the School of Geodesy and Geomatics (SGG) at Wuhan University is now routinely producing GPS satellite fractional cycle bias (FCB) products with open access for worldwide PPP users to conduct ambiguity-fixed PPP solution. We provide a brief theoretical background of PPP and present the strategies and models to compute the FCB products. The practical realization of the two-step (wide-lane and narrow-lane) FCB estimation scheme is described in detail. With GPS measurements taken in various situations, i.e., static, dynamic, and on low earth orbit (LEO) satellites, the quality of FCB estimation and the effectiveness of PPP ambiguity resolution (AR) are evaluated. The comparison with CNES FCBs indicated that our FCBs had a good consistency with the CNES ones. For wide-lane FCB, almost all the differences of the two products were within ±0.05 cycles. For narrow-lane FCB, 87.8 % of the differences were located between ±0.05 cycles, and 97.4 % of them were located between ±0.075 cycles. The experimental results showed that, compared with conventional ambiguity-float PPP, the averaged position RMS of static PPP can be improved from (3.6, 1.4, 3.6) to (2.0, 1.0, 2.7) centimeters for ambiguity-fixed PPP. The average accuracy improvement in the east, north, and up components reached 44.4, 28.6, and 25.0 %, respectively. A kinematic, ambiguity-fixed PPP test with observation of 80 min achieved a position accuracy of better than 5 cm at the one-sigma level in all three coordinate components. Compared with the results of ambiguity-float, kinematic PPP, the positioning biases of ambiguity-fixed PPP were improved by about 78.2, 20.8, and 65.1 % in east, north, and up. The RMS of LEO PPP test was improved by about 23.0, 37.0, and 43.0 % for GRACE-A and GRACE-B in radial, tangential, and normal directions when AR was applied to the same data set. These results demonstrated that the SGG FCB products can be produced with high quality for users anywhere around the world to carry out ambiguity-fixed PPP solutions.     

Using Geomechanical Method to Predict Tectonic Fractures in Low-Permeability Sandstone Reservoirs

Understanding and interpreting the timing, location, orientation, and intensity of natural fractures within a geological structure are commonly important to both exploration and production planning activities of low-porosity and low-permeability carbonate reservoirs. In this study, we explore the application of comprehensive geomechanical methods to quantitatively characterize the fracture parameters based on Strain Energy Density Theory, such as linear fracture density and volume fracture density. This study approach is based on the idea that energy generated by tectonic stress on brittle sandstone,which can be distinguished fracture surface energy, friction energy dissipation and residual strain energy and natural fractures can be interpreted or inferred from geomechanical-model-derived strains. For this analysis, we model an extension and compression compound fault block developed in a mechanically stratified sandstone and shale sequence because mechanics experimental data and drilling data exist that can be directly compared with model results.However, the results show that the approach and our study conclusion are independent of the specified structural geometry, which can correlate fracture parameters in different stages with different tectonic activities, and finally build and visualize fracture networks in sandstone. The presence or absence of filling minerals in fractures is shown to strongly control the destruction and transformation of low-permeability sandstone, and this control possesses crucial implications for interpreting fracture aperture and reservoir flow simulation.