Simultaneous Integration of Pressure, Water Cut,1 and 4-D Seismic Data In Geostatistical Reservoir Modeling

A geostatistically-based inverse technique, the sequential-self calibration (SSC) method, is used to update reservoir models so that they match observed pressure, water cut and time-lapse water saturation derived from 4-D seismic. Within the SSC, a steady-state genetic algorithm (GA) is applied to search the optimal master point locations, as well as the associated optimal permeability perturbations at the master locations. GA provides significant flexibility for SSC to parameterize master point locations, as well as to integrate different types of dynamic data because it does not require sensitivity coefficients. We show that the coupled SSC/GA method is very robust. Integrating dynamic data can significantly improve the characterization of reservoir heterogeneity with reduced uncertainty. Particularly, it can efficiently identify important large-scale spatial variation patterns (e.g., well connectivity, near well averages, high flow channels and low flow barriers) embedded in the reservoir heterogeneity. Using dynamic data, however, could be difficult to reproduce the permeability values on the cell-by-cell basis for the entire model. This reveals the important evidence that dynamic data carry information about large-scale spatial variation features, while they may be not sufficient to resolve the individual local values for the entire model. Through multiple realization analysis, the large-scale spatial features carried by the dynamic data can be extracted and represented by the ensemble mean model. Furthermore, the region informed by the dynamic data can be identified as the area with significant reduced variances in the ensemble variance model. Within this region, the cell-by-cell correlation between the true and updated permeability values can be significantly improved by integrating the dynamic data.     

Investigation of hydrochemical characteristics of groundwater from the Cretaceous-Eocene limestone aquifer in southern Ghana and southern Togo using hierarchical cluster analysis

The most relevant controls on the water quality within the Cretaceous-Eocene limestone aquifer of the Keta Basin, Ghana, and the coastal sedimentary basin of Togo were assessed using Q-mode hierarchical cluster analysis (HCA) and mass-balance modelling. The pattern recognition technique of HCA was employed for partitioning hydrochemical data from a total of 65 surface and borehole samples from the study area into water groups. A spatial plot of the water groups consisting of samples from the limestone aquifer shows that the vast majority of samples belonging to the same group are located in close proximity to one another, suggesting the same processes and/or flow paths in the limestone aquifer system. Geochemical reaction models of selected water groups were constructed using PHREEQC-2. The hydrochemical compositions of the water groups and the mass-balance calculations indicate that the dominant processes and reactions responsible for the hydrochemical evolution in the system are: (1) carbonate equilibria, (2) silicate weathering reactions, (3) limited mixing with saline water, and (4) ion exchange. The combined use of HCA and mass-balance modelling has shown to be a useful approach in interpreting groundwater hydrochemistry in an area where large uncertainties exist in the understanding of the groundwater flow system.     

Construction of a consistent semianalytic theory of a planetary or moon orbiter perturbed by a third body

The third body perturbation of an orbiter of a planet or moon is considered. A very convenient form of the Lagrange equations is given allowing an easy derivation of the various terms of the expansion of the perturbed elements. A careful analysis of the order of magnitude of these terms indicates which ones are required for a consistent theory. It follows that in many practical cases the main term of the disturbing function has to be carried to the second order of the perturbation theory.Paper presented at the 1981 Oberwolfach Conference on Mathematical Methods in Celestial Mechanics.Dedicated to V. Szebehely on the occasion of his 60th birthday     

Differences between solar wind plasmoids and ideal magnetohydrodynamic filaments

Plasma irregularities present in the solar wind are plasmoids, i.e. plasma-magnetic field entities. These actual plasmoids differ from ideal magnetohydrodynamic (MHD) filaments. Indeed, (1) their “skin” is not infinitely thin but has a physical thickness which is determined by the gyromotion of the thermal ions and electrons, (2) they are of finite extent and their magnetic flux is interconnected with the interplanetary magnetic flux, (3) when they penetrate into the magnetosphere their magnetic field lines become rooted in the ionosphere (i.e. in a medium with finite transverse conductivity), (4) the external Lorentz force acting on their boundary surface depends on the orientation of their magnetic moment with respect to the external magnetic field, (5) when their mechanical equilibrium is disturbed, hydromagnetic oscillations can be generated. It is also suggested that the front side of all solar wind plasmoids which have penetrated into the magnetosphere is the inner edge of the magnetospheric boundary layer while the magnetopause is considered to be the surface where the magnetospheric plasma ceases to have a trapped pitch angle distribution.     

Methodology for the Process Based Acquisition and Assessment of Non-Intended Outputs in the Mining Industry

For the activities of the mining industry land, equipment, material, and energy are used. During operation material and energy flows such as overburden, dead rock, tailings, wastewater, exhaust air, dust, energy, abrasion, coolant and lubricant losses, are released. These released material and energy flows are nearly always without value for the raw material supply chain as they are not production targets. Instead, they have negative effects on the economy and ecology and are, therefore, referred to as ‘non-intended’. The knowledge of the quantities and qualities of these non-intended outputs as a function of the processes and their parameters is the basis for technical and economical measures. A methodology for the acquisition and assessment of the material and energy flows in the mining industry was developed and tested at the Technical University Berlin, Germany. For that purpose and based on a system analysis in different mines, all relevant material and energy flows were assigned to individual processes. Causal relationships, possible interactions, quantities, and qualities were examined as functions of system parameters. Finally, a technical and economic evaluation was performed.     

Sediment delivery,resuspension, and transport in two contrasting canyon environments in the southwest Gulf of Lions

Multiple canyons incise the continental slope at the seaward edge of the continental shelf in the Gulf of Lions and are actively involved in the transfer of sediment from shelf to deep sea. Two canyons in the southwest region of the Gulf of Lions, Lacaze-Duthiers Canyon and Cap de Creus Canyon, were instrumented with bottom-boundary-layer tripods in their heads to evaluate the processes involved in sediment delivery, resuspension and transport. In both canyons, intense cold, dense-water flows carry sediment across the slope. In the Lacaze-Duthiers canyon head (located ∼35 km from the shoreline), dense-water cascading into the canyon was episodic. Currents were highly variable in the canyon head, and responded to interactions between the along-slope Northern Current and the sharp walls of the canyon. Inertial and other high-frequency fluctuations were associated with suspended-sediment concentrations of ∼5 mg/l. In Cap de Creus canyon head (located ∼14 km from the shoreline), downslope currents were higher in magnitude and more persistent than in Lacaze-Duthiers canyon head. Greater suspended-sediment concentrations (peaks up to 20 mg/l) were observed in Cap de Creus Canyon due to resuspension of the canyon seabed during dense-water cascading events. The similarities and contrasts between processes in these two canyon heads emphasize the importance of the interaction of currents with sharp canyon bathymetry. The data also suggest that cold, dense-water flows have more potential to carry sediment to the slope on narrow shelves, and may more efficiently transfer that sediment to the deep sea where a smooth transition between shelf and slope exists.     

Sustainable livelihoods approaches to inform government‐local partnerships and decision‐making in vulnerable environments

Sustainable livelihoods approaches used in international development are applied to a vulnerable New Zealand catchment. The Waiapu Catchment has a high proportion of indigenous residents, and is one of the most remote and deprived areas in the country. Linear and centralised approaches to indigenous development have failed to bring about desired changes. We identify “capitals” (social, human/political, physical, natural, financial and cultural) present in the catchment. From this assessment, we propose capital‐based holistic approaches to bring about community‐led change. The assessment and resulting approaches can be used in other vulnerable environments around the world.     

Paleoenvironmental history of submerged ruins on the Northern Euboean gulf coastal plain,central Greece

Hewn blocks from submerged ruins associated with the name Thronion are exposed during low, low tide along the northeastern shoreline of the fan delta which separates the Gulf of Euboea from the Maliakos Gulf, central Greece. Although the date of these ruins is not known, their submergence indicates that they predate the most recent marine transgression. Late Holocene sediments of the coastal plain adjacent to the ruins were studied using 34 auger cores drilled along two 1.3 and 1.1 km shore-normal sections. Cores were described in the field and sampled for sedimentologic and microfossil analyses. These analyses show that late Holocene transgressive marine and strandline units interfinger inland with deposits of a brackish water embayment. Subsequent progradation of the shoreline is marked by overlying slightly brackish to freshwater marsh sediments. A soil horizon developed on these marsh sediments defines a period of aerial exposure and land stability. Late Roman to Byzantine sherds (ca. 4th-13th Century A.D.) within the buried soil and a high phosphate content suggest that this soil developed in association with human habitation. the buried soil may be the surface on which the now-submerged ruins were built. the deposits below the buried soil indicate that prior to the period of soil formation, most of this area was under water and the paleoshoreline was landward of its present position. the ruins were later covered by lake or marsh deposits radiocarbon dated as 1400 A.D. the depth of the dated wood samples, 2.5–3.0 meters below the surface, indicates rapid sediment accumulation (ca. 40–55 cm/100 yrs) over the past 550 years. A small exposure of the ca. 1400 A.D. marsh silt and overlying post-1950 land fill near the ruins is the result of post-1400 A.D. erosion and recession of the shoreline. the lower pre-occupational and post-1400 A.D. transgressions were caused by a combination of eustatic sea level rise, tectonic subsidence, and fluctuations of sediment supply to this portion of the Kenourion fan delta.     

Helicopter-Borne Flux Measurements in the Nocturnal Boundary Layer Over Land – a Case Study

This case study introduces measurements of turbulent fluxes in a nocturnal boundary layer in North Germany with the new helicopter-borne turbulence measurement system HELIPOD, a detailed data analysis and examination in regard of systematic errors of the instrument, and some comparison with local similarity theory and experiments of the past, in order to confirm the occurrence of small vertical turbulent fluxes. The examined nocturnal boundary layer offered excellent conditions to analyse the quality of the measurement system. In this connection, a detailed look at a strong ground-based inversion disclosed small turbulent fluxes with a spectral maximum at ten metres wavelength or less, embedded in intermittent turbulence. For verification of these fluxes, the measurements were compared with well established results from past experiments. Local similarity theory was applied to calculate dimensionless variances of the turbulent quantities, which were found in good agreement with other observations. Since shear and stratification varied significantly on the horizontal flight legs due to global intermittency, a method was developed to determine vertical gradients on a horizontal flight pattern, by use of small fluctuations of the measurement height. With these locally determined gradients, gradient transport theory became applicable and the turbulent diffusivities for heat and momentum, the Richardson number, and the flux Richardson number were estimated within isolated strong turbulent outbursts. Within these outbursts the flux Richardson number was found between 0.1 and 0.2. The functional relationship between the gradient Richardson number and the turbulent Prandtl number agreed well with observations in past experiments and large eddy simulation. The impact of the stratification on the vertical turbulent exchange, as already described for the surface layer using Monin–Obukhov similarity, was analogously observed in the very stably stratified bulk flow when local scaling was applied.