Total evaporation estimation for accurate water accounting purposes: an appraisal of various available estimation methods

The estimation of total evaporation is fundamental for water accounting, considering its influence on water availability. Moreover, the current increase in water consumption (e.g. in sub-Saharan Africa and the world over), land cover/use changes, deteriorating water quality and the climate change projections in most regions of the world underscore the need to understand water loss. So far, different approaches have been developed and implemented in estimating the variations of total evaporation, with varying accuracies. The aim of this work was therefore, to provide a review of these different approaches for estimating total evaporation, as well as a detailed discussion of their strengths and weaknesses. Findings from this review have shown that total evaporation estimates derived, using ground-based meteorological and micro-meteorological methods are inadequate for representing its large-scale spatial variations. On the other hand, remote sensing technology, which acquires data at different resolutions (i.e. radiometric, spectral, spatial and temporal), provides timely, up-to-date and relatively accurate spatial estimates of total evaporation over large geographic coverage, for sustainable and effective water accounting, which is key for well-informed and improved management of water resources at both catchment and regional scales. In this regard, more details on the remote sensing-based methods of estimating total evaporation are provided, especially considering the robust technological advancements and its potential in characterizing earth features over time and space. This work has also managed to identify research gaps and challenges in the accurate estimation of total evaporation, using remote sensing, especially with the emergence of more advanced sensors and the characteristics of the landscape.     

Attitude estimation based on fusion of gyroscopes and single antenna GPS for small UAVs under the influence of vibration

An attitude estimation method is presented for small unmanned aerial vehicles (UAVs) powered by a piston engine which is the major source of vibration. Vibration of the engine significantly degrades the accuracy of the inertial measurement unit, especially for low-cost sensors that are based on micro electro-mechanical system. Therefore, a vibration model for a small UAV is proposed in order to examine the influence of vibration on attitude estimation with different sensors. The model is derived based on spectrum analysis with short-time Fourier transform. The vibration is compared with the drift of the gyroscope in order to examine the impact on attitude estimation. An attitude estimation method that fuses the gyroscopes and single antenna global positioning system (GPS) is proposed to mitigate the influence of engine vibration and gyroscope drift. The quaternion-based extended Kalman filter is implemented to fuse the sensors. This filter fuses the angular rates measured by the gyroscopes and the pseudo-attitude derived from the GPS velocity to estimate the attitude of the UAV. Simulations and experiment results indicate that the proposed method performs well both in short-term and long-term accuracy even though the gyroscopes are affected by drift and vibration noise, while the pseudo-attitude contains severe noise.     

利用MDA进行空间信息服务组合建模

提出了一种基于MDA的空间信息服务组合建模方法。该方法使用UML设计空间信息服务组合元模型,利用MDA模型转换机制生成空间信息服务链设计器,利用设计器构建空间信息服务组合模型。该建模方法能很好地描述数据流和控制流,通过引入空间信息服务本体库,实现服务资源动态组合建模。     

Application of remote sensing for vegetation mapping — A case study along the northern coastal districts of andhra pradesh

The study deals with the application of Remote Sensing for delineating various vegetation types along the three coastal districts of Andhra Pradesh. The satellite imagery of the region is divided into three types depending upon tone and texture. Each type is correlated with the ground truth. The species composition has been given and discussed.     

GPS navigation data bit decoding error during strong equatorial scintillation

Strong equatorial scintillation is often characterized by simultaneous fast phase changes and deep amplitude fading. The combined effect poses a challenge for GNSS receiver carrier tracking performance. One of the consequences of the strong scintillation is increased navigation message data bit decoding error. Understanding the rate of the data bit decoding error under equatorial scintillation is essential for high accuracy and high integrity applications. We present the statistical relationship between the data bit decoding error occurrences and the intensity of amplitude scintillation based on the processing of intermediate frequency GPS scintillation data collected on Ascension Island in March 2013. A third-order phase lock loop (PLL) is implemented to process the data and to access the data bit error typically expected in conventional receivers. A Kalman filter-based PLL is also used to process the same data to demonstrate that the data bit decoding error can be reduced through advanced carrier tracking designs.     

Detection and mapping of bracken fern weeds using multispectral remotely sensed data: a review of progress and challenges

Bracken fern is one of the major invasive plants distributed all over the world currently threatening socio-economic and ecological systems due to its ability to swiftly colonize landscapes. The study aimed at reviewing the progress and challenges in detecting and mapping of bracken fern weeds using different remote sensing techniques. Evidence from literature have revealed that traditional methods such as field surveys and modelling have been insufficient in detecting and mapping the spatial distribution of bracken fern at a regional scale. The applications of medium spatial resolution sensors have been constrained by their limited spatial, spectral and radiometric capabilities in detecting and mapping bracken fern. On the other hand, the availability of most of these data-sets free of charge, large swath width and their high temporal resolution have significantly improved remote sensing of bracken fern. The use of commercial satellite data with high resolution have also proven useful in providing fine spectral and spatial resolution capabilities that are primarily essential to offer precise and reliable data on the spatial distribution of invasive species. However, the application of these data-sets is largely restricted to smaller areas, due to high costs and huge data volumes. Studies on bracken fern classification have extensively adopted traditional classification methods such as supervised maximum likelihood classifier. In studies where traditional methods performed poorly, the combination of soft classifiers such as super resolution analysis and traditional methods of classification have shown an improvement in bracken fern classification. Finally, since high spatial resolution sensors are expensive to acquire and have small swath width, the current study recommends that future research can also consider investigating the utility of the freely available recently launched sensors with a global footprint that has the potential to provide invaluable information for repeated measurement of invasive species over time and space.     

Use of the L2C signal for inversions of GPS radio occultation data in the neutral atmosphere

Results from processing FORMOSAT-3/COSMIC radio occultations (RO) with the new GPS L2C signal acquired both in phase locked loop (PLL) and open loop (OL) modes are presented. Analysis of L2P, L2C, and L1CA signals acquired in PLL mode shows that in the presence of strong ionospheric scintillation not only L2P tracking, but also L1CA tracking often fails, while L2C tracking is most stable. The use of L2C improves current RO processing in the neutral atmosphere mainly by increasing the number of processed occultations (due to significant reduction in the number of L2 tracking failures) and marginally by a reduction in noise in statistics. The latter is due to the combination of reduced L2C noise (compared to L2P) and increased L1CA noise in those occultations where L2P would have failed. This result suggests application of OL tracking for L1CA and L2C signals throughout an entire occultation to optimally acquire RO data. Two methods of concurrent processing of L1CA and L2C RO signals are considered. Based on testing of individual occultations, these methods allow: (1) reduction in uncertainty of bending angles retrieved by wave optics in the lower troposphere and (2) reduction in small-scale residual errors of the ionospheric correction in the stratosphere.     

Integrating spectral and non-spectral data to improve urban settlement mapping in a large Latin-American city

ABSTRACT

Information on urban settlements is crucial for sustainability planning and management. While remote sensing has been used to derive such information, its applicability can be compromised due to the complexity in the urban environment. In this study, we developed a remote sensing method to map land cover types in a large Latin-American city, which is well known for its mushrooming unplanned and informal settlements. After carefully considering the landscape complexity there, we designed a data fusion method combining multispectral imagery and non-spectral data for urban and land mapping. Specifically, we acquired a cloud-free Landsat-8 image and two non-spectral datasets, i.e., digital elevation models and road networks. Then, we implemented a set of experiments with different inputs to evaluate their merits in thematic mapping through a supervised protocol. We found that the map generated with the multispectral data alone had an overall accuracy of 73.3% but combining multispectral imagery and non-spectral data yielded a land cover map with 90.7% overall accuracy. Interestingly, the thermal infrared information helped substantially improve both the overall and categorical accuracies, particularly for the two urban classes. The two types of non-spectral data were critical in resolving several spectrally confused categories, thus considerably increasing the mapping accuracy. However, the panchromatic band with higher spatial resolution and its derived textural measurement only generated a marginal accuracy improvement. The novelties of our work are with the successful separation between the two major types of urban settlements in a complex environment using a carefully designed data fusion approach and the insight into the relative merits of the thermal infrared information and non-spectral data in helping resolve the issue of class ambiguity. These findings should be valuable in deriving accurate urban settlement information which can further advance the research on socio-ecological dynamics and urban sustainability.     

An assessment of chlorophyll-a concentration spatio-temporal variation using Landsat satellite data,in a small tropical reservoir

Traditional approaches to monitoring aquatic systems are often limited by the need for data collection which often is time-consuming, expensive and non-continuous. The aim of the study was to map the spatio-temporal chlorophyll-a concentration changes in Malilangwe Reservoir, Zimbabwe as an indicator of phytoplankton biomass and trophic state when the reservoir was full (year 2000) and at its lowest capacity (year 2011), using readily available Landsat multispectral images. Medium-spatial resolution (30 m) Landsat multispectral Thematic Mapper TM 5 and ETM+ images for May to December 1999–2000 and 2010–2011 were used to derive chlorophyll-a concentrations. In situ measured chlorophyll-a and total suspended solids (TSS) concentrations for 2011 were employed to validate the Landsat chlorophyll-a and TSS estimates. The study results indicate that Landsat-derived chlorophyll-a and TSS estimates were comparable with field measurements. There was a considerable wet vs. dry season differences in total chlorophyll-a concentration, Secchi disc depth, TSS and turbidity within the reservoir. Using Permutational multivariate analyses of variance (PERMANOVA) analysis, there were significant differences (p < 0.0001) for chlorophyll-a concentration among sites, months and years whereas TSS was significant during the study months (p < 0.05). A strong positive significant correlation among both predicted TSS vs. chlorophyll-a and measured vs. predicted chlorophyll-a and TSS concentrations as well as an inverse relationship between reservoir chlorophyll-a concentrations and water level were found (p < 0.001 in all cases). In conclusion, total chlorophyll-a concentration in Malilangwe Reservoir was successfully derived from Landsat remote sensing data suggesting that the Landsat sensor is suitable for real-time monitoring over relatively short timescales and for small reservoirs. Satellite data can allow for surveying of chlorophyll-a concentration in aquatic ecosystems, thus, providing invaluable data in data scarce (limited on site ground measurements) environments.