We employ garnet isopleth thermobarometry to derive the P–T conditions of Permian and Cretaceous metamorphism in the Wölz crystalline Complex of the Eastern Alps. The successive growth increments of two distinct growth zones of the garnet porphyroblasts from the Wölz Complex indicate garnet growth in the temperature interval of 540°C to 560°C at pressures of 400 to 500 MPa during the Permian and temperatures ranging from 550°C to 570°C at pressures in the range of 700 to 800 MPa during the Cretaceous Eo-Alpine event. Based on diffusion modelling of secondary compositional zoning within the outermost portion of the first garnet growth zone constraints on the timing of the Permian and the Eo-Alpine metamorphic events are derived. We infer that the rocks remained in a temperature interval between 570°C and 610°C over about 10 to 20 Ma during the Permian, whereas the high temperature stage of the Eo-Alpine event only lasted for about 0.2 Ma. Although peak metamorphic temperatures never exceeded 620°C, the prolonged thermal annealing during the Permian produced several 100 µm wide alteration halos in the garnet porphyroblasts and partially erased their thermobarometric memory. Short diffusion profiles which evolved around late stage cracks within the first garnet growth zone constrain the crack formation to have occurred during cooling below about 450°C after the Eo-Alpine event. 相似文献
To evaluate the comparability of neo- and paleo-limnology, we made year-to-year as well as seasonal comparisons of contemporary zooplankton data and cladoceran remains in thick (9–42 mm) annual laminations in sediment of Lake Vesijärvi, southern Finland. We calculated the expected annual exuviae production of nine planktonic taxa in the water column using contemporary zooplankton records, and compared the value to the observed net accumulation of their remains in deep sediment for 7 years. Although all of the species studied occur commonly in the lake pelagic zone, deposition of remains differed significantly among taxa. The observed accumulation of three Bosmina species and Chydorus sphaericus was similar to or exceeded expected values, suggesting good preservation of their remains as well as focusing of sediment into the deepest part of the lake. The accumulation of Limnosida and Leptodora remains exceeded expected values several fold, suggesting under-representation of these species in pelagic plankton samples, as well as efficient transportation and spatial averaging of their remains in the sediment. Daphnia, Diaphanosoma, and Ceriodaphnia were clearly under-represented in the sediment due to poor preservation of their remains and use of a 50-μm sieve in sediment processing. Thus, sieving should be taken into account as a possible source of bias. Correlation between relative abundances of all species in the sediment and in the plankton was weak (rs = 0.54, P < 0.001), but for well-preserved species, the correlation was strong (rs = 0.91, P < 0.001). Inter-annual variation in the deposition of remains suggested that resuspension and sediment focusing may vary between years, thus making it difficult to interpret absolute abundances, even though the deepest part of the basin shows clear varve formation and seasonality is well recorded. Detailed study of the uppermost lamination showed the seasonal succession of a cladoceran community within an annual varve as well as differences in the seasonality and intensity of ephippia production among the species. We recommend that results of cladoceran analyses be expressed in several ways (relative abundances, per unit dry weight, per unit organic matter, and as net accumulation values) before drawing final conclusions, as each approach may reveal a different aspect of the deposition process. In addition, sedimentation differences between epilimnetic and hypolimnetic species should be considered in stratified lakes. 相似文献
This paper presents a numerical investigation on the effects of thermal shock as a pretreatment of rock prior to comminution. More specifically, the effect of heat shock-induced cracks on the uniaxial compressive strength of rock is numerically studied. The chosen constitutive model of rock employs a (strong) embedded discontinuity finite element formulation to describe cracks. The thermomechanical problem that governs the heat shock pretreatment of rocks is considered as an uncoupled problem because of a highly dominating role of the external heat influx. Two solution methods of the global problem are presented: an explicit-explicit dynamic scheme and an implicit-implicit quasi-static scheme. The model performance is tested in simulations on heterogeneous numerical rock samples subjected first to a heat shock pretreatment and then to a mechanical compression test. According to the results, the compressive strength of intact granite rock having the axial splitting failure mode can be substantially reduced by heat shock pretreatment. 相似文献
This study presents an innovative technique of executing soil nails called sectorized post grouting (SPG). The most utilized technique of soil nail grouting is gravity grouting, with the literature reporting advances in pressurized grouting. Although obtaining higher pullout resistance of soil nails, pressurized grouting, mostly done in single-stage grouting, does not compensate for exudation and its use in higher nail lengths is difficult. Thus, a technique has been developed that compensates for exudation, with easier application in lengthier nails. The technique was qualitatively assessed to evaluate its surface roughness and later applied in seven real soil nailing works, where it could be quantitatively assessed. The results show that sectorized post-grouted nails obtained greater pullout resistances than gravity grouted and single-stage grouted nails. Although similar improvement was found in tube-à-manchette (TAM) grouted nails, this method presents lower economic efficiency than sectorized post grouting. The pullout resistance results obtained in this study can be utilized in future soil nailing works executed utilizing SPG.
Underground hard coal mining usually disrupts the mechanical equilibrium of rock sequences, creating fractures within minor permeable rocks. The present study employs a dual-continuum model to assess how both fractured and porous sandstone media influence the percolation process in postmining setups. To test the approach, the software TOUGH2 was employed to simulate laminar fluid flow in the unsaturated zone of the Ibbenbüren Westfield mining area. Compared to other coal mining districts in Germany, this area is delineated by the topography and local geology, leading to a well-defined hydrogeological framework. Results reveal good agreement between the calculated and measured mine water discharge for the years 2008 and 2017. The constructed model was capable of reproducing the bimodal flow behavior of the adit by coupling a permeable fractured continuum with a low-conductivity rock matrix. While flow from the fractured continuum results in intense discharge events during winter months, the rock matrix determines a smooth discharge limb in summer. The study also evaluates the influence of individual and combined model parameters affecting the simulated curve. A detailed sensitivity analysis displayed the absolute and relative permeability function parameters of both continua among the most susceptible variables. However, a strong a priori knowledge of the value ranges for the matrix continuum helps to reduce the model ambiguity. This allowed for calibration of some of the fractured medium parameters for which sparse or variable data were available. However, the inclusion of the transport component and acquisition of more site-specific data is recommended to reduce their uncertainty.
Using geomorphological knowledge, spatial data and GIS methods, one can obtain phytogeomorphological site variables describing interactions between landforms and vegetation. We used 15 site variables derived from maps to explain forest site productivity in southern and central Finland expressed as dominant height of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies [L.] Karst.) with ages of 30–110 years. These site variables were grouped into two: Group 1 with seven variables describing geographical conditions of sites including climate, and Group 2 with eight variables describing local morphometric and soil properties. We calculated slope and aspect from a 25 × 25 m DEM. The catchment area, calcium content in soil, length of the growing season, radiation index, sea index, lake index, past highest shoreline and total annual temperature sum with threshold + 5 °C were also obtained. Then we classified the landforms of 688 sample plots into four major types and 15 sub-types. We applied regression analysis to explain the tree height as a function of the tree age and the phytogeomorphological site variables. When the tree height was explained with the tree age and the Group 1 variables, the remaining standard error of the model was 16.6–17.9%. When the Group 2 variables were added to the analysis, the standard error decreased slightly. The most significant variables were the temperature sum, latitude coordinate and length of the growing season. Other significant variables were elevation, slope and aspect. The major landform types, sub-types and watershed area did not explain the tree height. Furthermore, if the forest site types determined in the field were included, the remaining standard error decreased by ca. 2%, showing the importance of field information. 相似文献
Reaction rims of titanite on ilmenite are described in samples from four terranes of amphibolite-facies metapelites and amphibolites namely the Tamil Nadu area, southern India; the Val Strona area of the Ivrea-Verbano Zone, northern Italy, the Bamble Sector, southern Norway, and the northwestern Austroalpine Ötztal Complex. The titanite rims, and hence the stability of titanite (CaTiSiO4O) and Al–OH titanite, i.e. vuaganatite (hypothetical end-member CaAlSiO4OH), are discussed in the light of fH2O- and fO2-buffered equilibria involving clinopyroxene, amphibole, biotite, ilmenite, magnetite, and quartz in the systems CaO–FeO/Fe2O3–TiO2–SiO2–H2O–O2 (CFTSH) and CaO–FeO/Fe2O3–Al2O3–SiO2–H2O–O2 (CFASH) present in each of the examples. Textural evidence suggests that titanite reaction rims on ilmenite in rocks from Tamil Nadu, Val Strona, and the Bamble Sector originated most likely due to hydration reactions such as clinopyroxene + ilmenite + quartz + H2O = amphibole + titanite and oxidation reactions such as amphibole + ilmenite + O2 = titanite + magnetite + quartz + H2O during amphibolite-facies metamorphism, or, as in the case of the Ötztal Complex, during a subsequent greenschist-facies overprint. Overstepping of these reactions requires fH2O and fO2 to be high for titanite formation, which is also in accordance with equilibria involving Al–OH titanite. This study shows that, in addition to P, T, bulk–rock composition and composition of the coexisting fluid, fO2 and fH2O also play an important role in the formation of Al-bearing titanite during amphibolite- and greenschist-facies metamorphism. 相似文献
With improved observation methods, increased winter navigation, and increased awareness of the climate and environmental changes, research on the Baltic Sea ice conditions has become increasingly active. Sea ice has been recognized as a sensitive indicator for changes in climate. Although the inter-annual variability in the ice conditions is large, a change towards milder ice winters has been detected from the time series of the maximum annual extent of sea ice and the length of the ice season. On the basis of the ice extent, the shift towards a warmer climate took place in the latter half of the 19th century. On the other hand, data on the ice thickness, which are mostly limited to the land-fast ice zone, basically do not show clear trends during the 20th century, except that during the last 20 years the thickness of land-fast ice has decreased. Due to difficulties in measuring the pack-ice thickness, the total mass of sea ice in the Baltic Sea is, however, still poorly known. The ice extent and length of the ice season depend on the indices of the Arctic Oscillation and North Atlantic Oscillation. Sea ice dynamics, thermodynamics, structure, and properties strongly interact with each other, as well as with the atmosphere and the sea. The surface conditions over the ice-covered Baltic Sea show high spatial variability, which cannot be described by two surface types (such as ice and open water) only. The variability is strongly reflected to the radiative and turbulent surface fluxes. The Baltic Sea has served as a testbed for several developments in the theory of sea ice dynamics. Experiences with advanced models have increased our understanding on sea ice dynamics, which depends on the ice thickness distribution, and in turn redistributes the ice thickness. During the latest decade, advance has been made in studies on sea ice structure, surface albedo, penetration of solar radiation, sub-surface melting, and formation of superimposed ice and snow ice. A high vertical resolution has been found as a prerequisite to successfully model thermodynamic processes during the spring melt period. A few observations have demonstrated how the river discharge and ice melt affect the stratification of the oceanic boundary layer below the ice and the oceanic heat flux to the ice bottom. In general, process studies on ice–ocean interaction have been rare. In the future, increasingly multidisciplinary studies are needed with close links between sea ice physics, geochemistry and biology. 相似文献