Approaches to knowledge sharing and capacity building: The role of local information systems in marine and coastal management

This paper explores how coastal data and information can be mobilised in information systems and applied in coastal management. The concept of an Information System is defined and described, and the potential role of Local Information System (LIS) in integrated coastal management (ICM) is considered. Three examples, from the Severn Estuary, UK the coast of the North West of England and North Wales, and the Fal and Helford estuaries, are used to demonstrate the requirements of a LIS for coastal areas. The role of GIS as part of the solution is considered in detail. The paper demonstrates how ideas from the disciplines of information systems and information science can be practically applied in coastal areas. The findings promote a holistic approach for those involved in the development of technologies and dealing with data and information about coasts and oceans.     

Wildfire preparedness,community cohesion and social–ecological systems

The consequences of wildfires are felt in susceptible communities around the globe on an annual basis. Climate change predictions in places like the south-east of Australia and western United States suggest that wildfires may become more frequent and more intense with global climate change. Compounding this issue is progressive urban development at the peri-urban fringe (wildland–urban interface), where continued infrastructure development and demographic changes are likely to expose more people and property to this potentially disastrous natural hazard. Preparing well in advance of the wildfire season is seen as a fundamental behaviour that can both reduce community wildfire vulnerability and increase hazard resilience – it is an important element of adaptive capacity that allows people to coexist with the hazardous environment in which they live. We use household interviews and surveys to build and test a substantive model that illustrates how social cohesion influences the decision to prepare for wildfire. We demonstrate that social cohesion, particularly community characteristics like ‘sense of community’ and ‘collective problem solving’, are community-based resources that support both the adoption of mechanical preparations, and the development of cognitive abilities and capacities that reduce vulnerability and enhance resilience to wildfire. We use the results of this work to highlight opportunities to transfer techniques and approaches from natural hazards research to climate change adaptation research to explore how the impacts attributed to the social components of social–ecological systems can be mitigated more effectively.     

Subduction and back-arc activity at the Hikurangi convergent Margin,New Zealand

The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededM _s=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutM _s=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere.     

Calculated mineral equilibria in the greenschist-blueschist-eclogite facies in Na2O−FeO−MgO−Al2O3−SiO2−H2O

The new, greatly expanded internally-consistent dataset of Holland and Powell includes thermodynamic data for a wide range of mineral end-members in common rock-forming minerals, in particular, including FeMg_-1 substitutions in glaucophane, garnet, chloritoid and carpholite, and FeMg_-1 and MgSiAl_-1Al_-1 substitutions in talc and chlorite. Moreover, we have the uncertainties and correlations for these data. With the data, we have calculated the full pressure-temperature phase diagram for the system Na₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (NFMASH) for quartz (or coesite) and H₂O in excess, in the range 300°–800°C and 5–50 kbars. By solving the set of non-linear equations formed by the equilibrium relationships for an independent set of equations between the end-members in an assemblage in NFMASH, the compositions of the minerals (and PT) can be calculated. Thus the changes in MgSiAl_-1Al_-1 along NMASH reactions, and FeSiAl_-1Al_-1 along NFASH reactions, are calculated, and the changes in FeMg_-1 and MgSiAl_-1Al_-1 along NFMASH reactions are calculated. From this information it is straightforward to generate PT diagrams for specific rock compositions. Mineral assemblages and mineral compositional changes in the phase diagram are discussed in relation to greenschist, blueschist and eclogite facies assemblages in metapelitic rocks. It is found that the correspondence between the predictions of the phase diagrams and the observations on rocks is remarkably good. When semiquantitative extensions of the phase diagram to include Ca(MgFe)_-1, NaSiCa_-1Al_-1, Fe³⁺Al_-1 and KNa_-1 substitutions are taken into account the agreement is essentially complete.     

Alluvial gold in Kalimantan, Indonesia: A colloidal origin?

Extensive placer gold deposits occur in Quaternary palaeochannels in the Ampalit and Cempaga Buang drainage basins near Kasongan, Central Kalimantan, Indonesia. Broad interfluvial Pleistocene terraces surrounding the drainages also contain significant amounts of placer gold. The “channel” and “terrace” gold deposits together cover an area in excess of 180 km².Exploration for gold at Ampalit followed traditional alluvial methods, and assumed that mechanical and gravitational factors were the principal mechanisms affecting gold accumulation and concentration. Gold was considered to be physically reworked from terraces and redeposited in the present drainage channels or underlying, laterally displaced, palaeochannels. However, a comparison of gold grains from the Ampalit drainage channel and adjacent terraces indicates that gold grains in the drainage channels are possibly of colloidal origin and not mechanically transported to their present domain.The morphology of gold grains from the Ampalit drainage is compared with grains from adjacent terraces, using scanning electron microscopy and atomic force microscopy. The latter procedure allows for nondestructive analysis to give true three dimensional surface topography down to nanometre resolution. Evidence from force microscopy supports a colloidal origin for gold aggregates.The average purity of gold produced from the Ampalit dredging operation is 970 fine (970/1000) and the majority of examined gold grains extracted from beneath the drainage channel have a purity of 998 fine. This unusually high degree of purity suggests a selective dissolution/aggregation mechanism. We propose that gold is transported downward and laterally in groundwater percolating through the terrace sands and gravels to the current drainage as a humic acid-stabilised colloid. As the pregnant groundwater migrates toward the present drainage channels, it encounters a sleep chemical gradient and the colloid aggregates. The aggregation process occurs near clay zones within palaeochannel sands and gravels beneath the present river sediments. Here the colloidal aggregates form small grains (usually <1 mm) of extremely high purity.Today, the inherently unstable gold deposits at Ampalit are in a state of both aggregation and dissolution. Identification of low energy zones, location of point bar lags in palaeo and recent drainage channels, and the extrapolation of areas of low energy are not solely valid as exploration guides for gold accumulation in this environment. Exploration methods that also recognise ground water migration and composition, and the geochemical controls of dissolution and aggregation, will improve the ability to identify ore accumulations, thus contributing to improved economics of mining these deposits.     

Determining Paleosol Topography Using Seismic Refraction

The seismic refraction reversed profiling technique has been used to investigate the topography of the last interglacial soil (paleosol S1) within the central Chinese Loess Plateau near Xifeng. The results suggest an essentially flat-lying soil at a depth which varies by only a few meters over an area of more than 10 km². In addition, the results indicate a high-velocity layer at 50-60 m depth which is thought to coincide with a layer of carbonate concretions at the base of paleosol S5. The results agree well with the local loess-paleosol stratigraphy for this area and indicate that the seismic refraction method is a rapid technique for investigating paleotopography.     

The Tasman Sea earthquake of 25 November 1983 and stress in the Australian plate

The Tasman Sea earthquake of 25 November 1983 was large enough (M₀ ≈ 1.1× 10¹⁸ Nm) to be recorded world-wide and provide information on the state of intraplate stress in the lithosphere beneath the Tasman Sea. The earthquake occurred beneath the abyssal plain at a depth of about 25 km and was associated with almost pure dip-slip faulting. The direction of the pressure axis of the focal mechanism is similar (139 degrees E of N) to those observed from the nearby Australian mainland. Hence both the oceanic Tasman Sea and continental Australia appear to be part of the same stress regime. However, the direction of stress in this part of the Australian plate does not coincide with the north-south direction of motion of the plate and therefore forces other than the ridge push must be invoked to generate the stresses observed.     

Initiation and growth of salt-based thrust belts on passive margins: results from physical models

Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time.     

Detrital record of Mesozoic shortening in the Yanshan belt, NE China: testing structural interpretations with basin analysis

The Yanshan fold‐thrust belt is an exposed portion of a major Mesozoic orogenic system that lies north of Beijing in northeast China. Structures and strata within the Yanshan record a complex history of thrust faulting characterized by multiple deformational events. Initially, Triassic thrusting led to the erosion of a thick sequence of Proterozoic and Palaeozoic sedimentary strata from northern reaches of the thrust belt; Triassic–Lower Jurassic strata that record this episode are deposited in a thin belt south of this zone of erosion. This was followed by postulated Late Jurassic emplacement of a major allochthon (the Chengde thrust plate), which is thought to have overridden structures and strata associated with the Triassic event and is cut by two younger thrusts (the Gubeikou and Chengde County thrusts). The Chengde allochthon is now expressed as a major east–west trending, thrust‐bounded synform (the Chengde synform), which has been interpreted as a folded klippe 20 km wide underlain by a single, north‐vergent thrust fault. Two sedimentary basins, defined on the basis of provenance, geochronology and palaeodispersal trends, developed within the Yanshan belt during Late Jurassic–Early Cretaceous time and are closely associated with the Chengde thrust and allied structures. Shouwangfen basin developed in the footwall of the Gubeikou thrust and records syntectonic unroofing of the hanging wall of that fault. Chengde basin developed in part atop Proterozoic strata interpreted as the upper plate of the Chengde allochthon and records unroofing of the adjacent Chengde County thrust. Both the Chengde County thrust and the Gubeikou thrust are younger than emplacement of the postulated Chengde allochthon, and structurally underlie it, yet neither Shouwangfen basin nor Chengde basin contain a detrital record of the erosion of this overlying structure. In addition, facies, palaeodispersal patterns and geochronology of Upper Jurassic strata that are cut by the Chengde thrust suggest only limited (ca. 5 km) displacement along this fault. We suggest that the units forming the Chengde synform are autochthonous, and that the synform is bounded by two limited‐displacement faults of opposing north and south vergence, rather than a single large north‐directed thrust. This conclusion implies that the Yanshan belt experienced far less Late Jurassic shortening than was previously thought, and has major implications for the Mesozoic evolution of the region. Specifically, we argue that the bulk of shortening and uplift in the Yanshan belt was accomplished during Triassic–Early Jurassic time, and that Late Jurassic structures modified and locally ponded sediments from a well‐developed southward drainage system developed atop this older orogen. Although Upper Jurassic strata are widespread throughout the Yanshan belt, it is clear that these strata developed within several discrete intermontane basins that are not correlable across the belt as a single entity. Thus, the Yanshan has no obvious associated foreland basin, and determining where the Mesozoic erosional products of this orogen ultimately lie is one of the more intriguing unresolved questions surrounding the palaeogeography of North China.