LIDAR Validation Using GIS: A Case Study Comparison between Two LIDAR Collection Methods

Abstract

In the summer of 2000, the Annapolis Valley of Nova Scotia, Canada was selected for a high‐resolution elevation survey utilizing LIDAR (Light Detection And Ranging). Two different LIDAR systems were used to acquire data for the area. The vertical accuracy specification for the survey called for heights to be within an average of 15 cm of measured GPS heights and 95% of the data to be within 30 cm. Prior to the application of these data to geoscientific problems, extensive validation procedures were employed. High precision GPS and traditional surveys were conducted to collect height validation checkpoints. Two validation methods were developed in a GIS environment that involved comparing the checkpoints to the original LIDAR points and to an interpolated “bald earth” DEM. A systematic height error between flight lines for one of the LIDAR methods was detected that related to the calibration procedures used in the survey. This study highlights the differences between laser systems, calibration and deployment methodologies and emphasizes the necessity for independent validation data.     

Quantitative Revolution 2: The Critical (Re)Turn

Although many have questioned the adequacy of quantitative methods for addressing issues of concern in critical geographies, such as social justice and inequality, many have argued that quantification can potentially make rich contributions to understanding and addressing these issues. In light of the recent attempts to reassert the critical potential and positive role of quantitative geography, we suggest in this introductory article for the Focus Section that the antagonism between critical and quantitative geographies is not beneficial to the discipline. We highlight some promising developments in modern quantitative geography and reflect on the ways in which the critical–quantitative binary can be at least partially eclipsed. We emphasize that knowledge in quantitative methods is essential for deciphering and challenging regressive political agendas, now often supported by numbers and quantitative analysis. Quantitative geography, when integrated with a critical sensibility and used appropriately, can be a powerful tool for fostering progressive social and political change.     

Global Metropolis: Assessing Economic Activity in Urban Centers Based on Nighttime Satellite Images

This research provides new data and insight on metropolitan areas worldwide. It summarizes new data, derived from satellite images of the world at night, to provide systematic estimates of the economic activity generated by cities and metropolitan areas worldwide. It identifies 681 global metropolitan areas each with more than 500,000 people. Taken as a whole, these large global metropolitan regions house 24 percent of the world's population but produce 60 percent of global output, measured as light emissions. Asia leads the way in global economic urbanization according to our findings, followed by North America, the emerging economies, and Europe.     

Independence and mobility in later life

This paper explores independence in later life and its relations with mobility, or embodied movements through physical space on the basis of a review of a range of academic literature and in-depth interviews with community-dwelling adults aged 70 and more in the UK. We suggest that independence is a complex and fuzzy notion that is best thought of as a qualitative multiplicity and as an unstable achievement fabricated out of dependencies on bodies, technologies, infrastructures, social networks and other elements. Yet we also find that the study participants understand independent mobility as avoiding lifts provided by next of kin, friends or others for getting around. This is tied to the enactment of particular forms of embodiment and ageist subject positions for older people and implies that older adults are inadvertently complicit in the perpetuation of the connotations of dependency in later life with passivity, burden and undesirability. To counteract these tendencies, we end this paper by elaborating more inclusive and broader conceptualisations of dependence, independence and independent mobility in later life.     

Time-lapse camera observations of gas piston activity at Pu‘u ‘ō‘ō, Kīlauea volcano, Hawai‘i

Gas pistoning is a type of eruptive behavior described first at K??lauea volcano and characterized by the (commonly) cyclic rise and fall of the lava surface within a volcanic vent or lava lake. Though recognized for decades, its cause continues to be debated, and determining why and when it occurs has important implications for understanding vesiculation and outgassing processes at basaltic volcanoes. Here, we describe gas piston activity that occurred at the Pu??u ???????? cone, in K??lauea??s east rift zone, during June 2006. Direct, detailed measurements of lava level, made from time-lapse camera images captured at close range, show that the gas pistons during the study period lasted from 2 to 60?min, had volumes ranging from 14 to 104?m³, displayed a slowing rise rate of the lava surface, and had an average gas release duration of 49?s. Our data are inconsistent with gas pistoning models that invoke gas slug rise or a dynamic pressure balance but are compatible with models which appeal to gas accumulation and loss near the top of the lava column, possibly through the generation and collapse of a foam layer.     

Measurement of LNAPL Flux Using Single‐Well Intermittent Mixing Tracer Dilution Tests

The stability of subsurface Light Nonaqueous Phase Liquids (LNAPLs) is a key factor driving expectations for remedial measures at LNAPL sites. The conventional approach to resolving LNAPL stability has been to apply Darcy's Equation. This paper explores an alternative approach wherein single‐well tracer dilution tests with intermittent mixing are used to resolve LNAPL stability. As a first step, an implicit solution for single‐well intermittent mixing tracer dilution tests is derived. This includes key assumptions and limits on the allowable time between intermittent mixing events. Second, single‐well tracer dilution tests with intermittent mixing are conducted under conditions of known LNAPL flux. This includes a laboratory sand tank study and two field tests at active LNAPL recovery wells. Results from the sand tank studies indicate that LNAPL fluxes in wells can be transformed into formation fluxes using corrections for (1) LNAPL thicknesses in the well and formation and (2) convergence of flow to the well. Using the apparent convergence factor from the sand tank experiment, the average error between the known and measured LNAPL fluxes is 4%. Results from the field studies show nearly identical known and measured LNAPL fluxes at one well. At the second well the measured fluxes appear to exceed the known value by a factor of two. Agreement between the known and measured LNAPL fluxes, within a factor of two, indicates that single‐well tracer dilution tests with intermittent mixing can be a viable means of resolving LNAPL stability.     

A review of sediment and nutrient concentration data from Australia for use in catchment water quality models

Land use (and land management) change is seen as the primary factor responsible for changes in sediment and nutrient delivery to water bodies. Understanding how sediment and nutrient (or constituent) concentrations vary with land use is critical to understanding the current and future impact of land use change on aquatic ecosystems. Access to appropriate land-use based water quality data is also important for calculating reliable load estimates using water quality models. This study collated published and unpublished runoff, constituent concentration and load data for Australian catchments. Water quality data for total suspended sediments (TSS), total nitrogen (TN) and total phosphorus (TP) were collated from runoff events with a focus on catchment areas that have a single or majority of the contributing area under one land use. Where possible, information on the dissolved forms of nutrients were also collated. For each data point, information was included on the site location, land use type and condition, contributing catchment area, runoff, laboratory analyses, the number of samples collected over the hydrograph and the mean constituent concentration calculation method. A total of ～750 entries were recorded from 514 different geographical sites covering 13 different land uses. We found that the nutrient concentrations collected using "grab" sampling (without a well defined hydrograph) were lower than for sites with gauged auto-samplers although this data set was small and no statistical analysis could be undertaken. There was no statistically significant difference (p<0.05) between data collected at plot and catchment scales for the same land use. This is most likely due to differences in land condition over-shadowing the effects of spatial scale. There was, however, a significant difference in the concentration value for constituent samples collected from sites where >90% of the catchment was represented by a single land use, compared to sites with <90% of the upstream area represented by a single land use. This highlights the need for more single land use water quality data, preferably over a range of spatial scales. Overall, the land uses with the highest median TSS concentrations were mining (～50,000mg/l), horticulture (～3000mg/l), dryland cropping (～2000mg/l), cotton (～600mg/l) and grazing on native pastures (～300mg/l). The highest median TN concentrations are from horticulture (～32,000μg/l), cotton (～6500μg/l), bananas (～2700μg/l), grazing on modified pastures (～2200μg/l) and sugar (～1700μg/l). For TP it is forestry (～5800μg/l), horticulture (～1500μg/l), bananas (～1400μg/l), dryland cropping (～900mg/l) and grazing on modified pastures (～400μg/l). For the dissolved nutrient fractions, the sugarcane land use had the highest concentrations of dissolved inorganic nitrogen (DIN), dissolved organic nitrogen (DON) and dissolved organic phosphorus (DOP). Urban land use had the highest concentrations of dissolved inorganic phosphorus (DIP). This study provides modellers and catchment managers with an increased understanding of the processes involved in estimating constituent concentrations, the data available for use in modelling projects, and the conditions under which they should be applied. Areas requiring more data are also discussed.