耐压柱壳参数化设计与灵敏度分析

为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。     

电解法处理船舶压载水的杀菌性能及机理研究

船舶压载水携带的微生物对目的海域的污染问题亟待解决。采用电解法,以渤海湾的海水为处理对象,以炭纤维材料为阴极,分别以碳棒、碳板和炭纤维为阳极,首先考察了施电2.00 V下3种阳极炭材料对应的杀菌效果,进而重点考查了碳板为阳极材料时施加不同槽压下的杀菌性能,并对其杀菌机理进行初步分析。结果表明,3种阳极材料对应的杀菌效果先后顺序为碳棒碳板炭纤维,各自的杀菌效果均较为明显,施电18 min时碳板对应的灭活率可达100%;以碳板为阳极时,施加槽压越高杀菌效果越显著,本研究范围内以1.81 V为佳,施电18 min时灭活率在99%以上;不同槽压下体系中氯离子浓度和p H都随时间整体呈减小趋势,一定程度上可用于解释杀菌作用过程。研究结果可为电解法处理船舶压载水提供参考和借鉴。     

Local Oceanic Vertical Deflection Determination with Gravity Data Along a Profile

Deflections of the vertical (DOVs) over oceans cannot be directly measured, which restricts their applications. A local covariance function of anomalous potential is put forward in this paper in conjunction with the least-squares collocation (LSC) method to compute the oceanic DOVs utilization of oceanic gravity data along a profile. The covariance functions of gravity field quantities have been derived directly as functions of x, y and z without the need to introduce coordinate transformations corresponding to along- or cross-profile components. In the proposed methodology, gravity data along a profile were used to calculate the residual gravity anomaly using the remove-compute-restore technique. The residual gravity anomaly was used to calculate the parameters of the proposed covariance function of the local anomalous gravity field, which was used in the LSC to compute the residual DOVs along the profile. The residual DOVs added model DOVs to recover the DOVs along the profile. The results of a simulation experiment prove that the proposed methodology is feasible and effective.     

利用极化SAR数据进行土地覆盖分类研究

基于相关矩阵特征向量的目标分解将地物回波复杂的散射过程分解成相互独立的三种单一散射分量:单向散射、双向散射和交叉散射,分别对应各自的目标相关矩阵。目标分解技术降低了散射回波之间的相关性,有利于分析地物散射机理,有助于提高分类精度。对荷兰F levoland地区全极化数据进行分解,经过试验和相关性分析,选用7种数据形成多参数数据组合,对其进行最大似然监督分类,同时进行常规三种极化加相位差的分类和基于复W ishart分布的最大似然分类,逐像元计算混淆矩阵,分析对比三种分类结果的精度,试验表明:相对于常规数据组合分类,基于复W ishart分布的监督分类可以小幅度提高分类精度,而利用目标分解得到多参数组合数据进行分类则有大幅度的提高。     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.     

不同碳氮浓度对雨生红球藻生长及虾青素累积的影响

研究了不同二氧化碳浓度和硝酸钾浓度对雨生红球藻生长及虾青素累积的影响。结果表明,较高浓度的CO2(600×10-6)能够显著促进雨生红球藻的生长、光合作用的进行和虾青素的累积。红球藻单个细胞内的虾青素含量随着培养液中硝酸钾浓度的降低而增加,绿色游动藻种和绿色不动藻种培养12 d后获得的最大虾青素值分别为10.93 pg/个和12.64 pg/个。连续通气是促进雨生红球藻生长及虾青素累积的一种有效碳源提供方式。     

用于遥感测温的双通道红外辐射计

本文介绍了一种用于遥感温度测量的、且与目前大多数星载红外遥感器波段相一致的双通道红外辐射计。该辐射计采用碲镉汞做为探测器。它可用于温度测量,其同步测量数据可用于星载红外遥感器的定标和数据的真实性检验。本文介绍了总体方案、精度计算及光、机、电和数据处理等部分的设计方法。     

Prediction methods of spudcan penetration for jack-up units

Jack-up units are extensively playing a successful role in drilling engineering around the world, and their safety and efficiency take more and more attraction in both research and engineering practice. An accurate prediction of the spudcan penetration depth is quite instrumental in deciding on whether a jack-up unit is feasible to operate at the site. The prediction of a too large penetration depth may lead to the hesitation or even rejection of a site due to potential difficulties in the subsequent extraction process; the same is true of a too small depth prediction due to the problem of possible instability during operation. However, a deviation between predictive results and final field data usually exists, especially when a strong-over-soft soil is included in the strata. The ultimate decision sometimes to a great extent depends on the practical experience, not the predictive results given by the guideline. It is somewhat risky, but no choice. Therefore, a feasible predictive method for the spudcan penetration depth, especially in strata with strong-over-soft soil profile, is urgently needed by the jack-up industry. In view of this, a comprehensive investigation on methods of predicting spudcan penetration is executed. For types of different soil profiles, predictive methods for spudcan penetration depth are proposed, and the corresponding experiment is also conducted to validate these methods. In addition, to further verify the feasibility of the proposed methods, a practical engineering case encountered in the South China Sea is also presented, and the corresponding numerical and experimental results are also presented and discussed.     

Deriving regional vertical fluid migration rates offshore southwestern Taiwan using bottom-simulating reflectors

Fluid migration rates are important parameters for understanding the structural characteristics and evolution of the crustal tectonics and hydrocarbon exploration. However, they are difficult to measure on the seafloor. Densely sampled temperature measurements might shed light on our study of the fluid migration rates. In this study, we first use reflection seismic data to derive geothermal gradient patterns at different sub-seafloor depths, then calculated 1D vertical fluid flow models by analyzing the Péclet numbers in the offshore regions of SW Taiwan. We found Péclet numbers ranging from 2 to 5, implying that vertical fluid flow velocities are between 6 and 44 cm/year. Assumed a homogenous permeable layer and no lateral variation of the temperature fields, we analyzed possible errors caused by depth-dependent thermal conductivity and velocity-depth function. They probably cause less than 2 cm/year of errors in the estimated vertical fluid flow rate. In terms of regional fluid flow patterns, we found higher fluid flow rates near the toe of the trench, and a dramatic increase in fluid flow rate when the continental slope of the Chinese passive margin enters into the trench, and reduced fluid flow rates in the hinterland. We propose that this is a new and potentially useful method to derive regional fluid flow rate models for studying geochemical and biological processes in shallow seafloor sediments and the regional hydrological budget.     

Silver in Tokyo Bay estuarine waters and Japanese rivers

Dissolved and particulate concentrations of silver in Tokyo Bay estuarine waters and Japanese rivers were determined in this study. The dissolved silver concentrations in the surface water of Tokyo Bay range from 5.9 to 15.1 pmol kg⁻¹, which is comparable to those in the surface water of the Japan Sea, but two or three times higher than those in the surface water of the open ocean. However, elevated concentrations of dissolved silver are not found in Tokyo Bay compared with those in other highly urbanized estuaries, such as San Francisco Bay (20∼243 pmol kg⁻¹). In the Tokyo Bay estuary, silver typically exhibits non-conservative mixing behavior, which is a common feature in the other estuaries reported previously. Dissolved silver concentrations decrease with salinity from the rivers to the mouth of Tokyo Bay. Silver is efficiently scavenged by suspended particulates, as evidenced by the high conditional distribution coefficients for silver throughout the estuary (log K_d > 5.0 ± 0.6). The silver fluxes into Tokyo Bay via inflowing rivers and atmospheric deposition were estimated as 83 kg y⁻¹ and 15 kg y⁻¹, respectively. A simple budget calculation shows that the silver supplied from rivers and atmosphere must be rapidly scavenged within the Tokyo Bay estuary.