Groundwater components in the alluvial aquifer of the alpine Rhone River valley, Bois de Finges area, Wallis Canton, Switzerland

Source, type, and quantity of various components of groundwater, as well as their spatial and temporal variations were determined by different hydrochemical methods in the alluvial aquifer of the upper Rhone River valley, Bois de Finges, Wallis Canton, Switzerland. The methods used are hydrochemical modeling, stable-isotope analysis, and chemical analysis of surface water and groundwater. Sampling during high- and low-water periods determined the spatial distribution of the water chemistry, whereas monthly sampling over three years provided a basis for understanding seasonal variability. The physico-chemical parameters of the groundwater have spatial and seasonal variations. The groundwater chemical composition of the Rhone alluvial aquifer indicates a mixing of weakly mineralized Rhone River water and SO₄-rich water entering from the south side of the valley. Temporal changes in groundwater chemistry and in groundwater levels reflect the seasonal variations of the different contributors to groundwater recharge. The Rhone River recharges the alluvial aquifer only during the summer high-water period. Electronic Publication     

Thermal structure and metamorphic evolution of the Piemont-Ligurian metasediments in the northern Western Alps

In the Western Alps, the Piemont-Ligurian oceanic domain records blueschist to eclogite metamorphic conditions during the Alpine orogeny. This domain is classically divided into two “zones” (Combin and Zermatt-Saas), with contrasting metamorphic evolution, and separated tectonically by the Combin fault. This study presents new metamorphic and temperature (RSCM thermometry) data obtained in Piemont-Ligurian metasediments and proposes a reevaluation of the P–T evolution of this domain. In the upper unit (or “Combin zone”) temperatures are in the range of 420–530 °C, with an increase of temperature from upper to lower structural levels. Petrological evidences show that these temperatures are related to the retrograde path and to deformation at greenschist metamorphic conditions. This highlights heating during exhumation of HP metamorphic rocks. In the lower unit (or “Zermatt-Saas zone”), temperatures are very homogeneous in the range of 500–540 °C. This shows almost continuous downward temperature increase in the Piemont-Ligurian domain. The observed thermal structure is interpreted as the result of the upper and lower unit juxtaposition along shear zones at a temperature of ~500 °C during the Middle Eocene. This juxtaposition probably occurred at shallow crustal levels (~15–20 km) within a subduction channel. We finally propose that the Piemont-Ligurian Domain should not be viewed as two distinct “zones”, but rather as a stack of several tectonic slices.     

Correcting wind‐induced bias in solid precipitation measurements in case of limited and uncertain data

Automatic precipitation gauges tend to underestimate solid precipitation in the presence of wind. Loss as a function of wind speed is typically evaluated by comparing the gauge with a more accurate measurement made using a double‐fence intercomparison reference gauge (DFIR). For small precipitation events, small errors in the observations can induce large errors in the ‘catch’ ratio, i.e. the ratio of the automatic gauge measurement to the DFIR observation. For this reason, precipitation events of less than 3 mm are typically discarded before performing the regression analysis. This can mean discarding more than 90% of the observations. This paper shows how the method of weighted least squares can be used to perform a regression analysis that can take into account the whole sample to provide a more accurate estimation of the relationship between the catch ratio and the wind speed. This methodology is then used to obtain an adjustment curve for a shielded Geonor T‐200B precipitation gauge in Northern Québec. Copyright © 2008 John Wiley & Sons, Ltd and Her Majesty the Queen in right of Canada.     

Fully coupled poromechanical back analysis of the pulse test by inverse method

In this paper, we investigate the pulse test, which is usually considered as efficient for measuring the permeability of weakly permeable porous media. The pulse is first analyzed and we show that it is a fully poromechanical coupled problem. Owing to those couplings, the problem is 2D‐axisymmetrical, rather than 1D as is usually considered to be the case. As a consequence, the 1D solutions, for example under constant mean stress hypothesis, although giving good approximates of permeability and storage coefficient, are not rigorous and an enhanced back analysis of the test requires 2D solutions. Therefore, no analytical solution exists, and the problem has to be solved using 2D‐axisymmetrical numerical modelings of the pulse test. The finite element method is considered in this paper. We then proceed to formulate the pulse test back analysis as a parameter identification problem, and we focus on intrinsic permeability, Biot coefficient, drained Young's modulus and reservoir compressibility levels. This parameter identification problem is solved by an inverse method consisting of the minimization of a cost‐functional, through a gradient‐based algorithm. This new method of interpretation of the pulse test is finally applied to laboratory tests on Meuse/Haute–Marne argillite and is shown to give encouraging results. Copyright © 2010 John Wiley & Sons, Ltd.     

Synoptic hydrography of a highly stratified estuary

This study investigates the hydrodynamic characteristics of the lower, middle, and upper sectors of a highly stratified estuary, the Itajaí-Açu river estuary (south of Brazil ∼27° S/48.5° W). The study is based on a 25-h field campaign with three sampling stations positioned at 2, 17, and 38 km inward from the river mouth, during low river discharge condition and spring tide. The experimental data gathered was reduced and analyzed in terms of distribution of variables in time and space tide average vertical profiles and decomposition of the advective transport of salt and suspended particulate matter (SPM). Tidal range was nearly constant along the estuary, presenting time lag of about 2 h between lower and upper estuary. The ebb discharge peaks were about twice the discharge flood peaks and occurred simultaneously. The tide was the main determining agent in the lower estuary, where currents, salt stratification, and SPM distributions presented a repetitive behavior. In the middle estuary, the tide effects were also observed, but the presence of saline waters decreased along the time due to increasing river discharge during the campaign. The distribution of SPM in the mid- and upper estuary presented patched pattern not associated with tides and may be attributed to short-term flood contributions of tributaries. Currents presented ebb dominance in all three sectors; in the middle and upper estuary, they presented also a time asymmetry, with ebb currents longer than flood. The advective transport of salt in the lower estuary was upstream, with dominance of gravitational circulation term. In the mid-estuary, there was practically no transport, with balance between fluvial discharge (downstream) and tidal correlation (upstream). The advective transport of SPM was upstream in the lower estuary and downstream in the mid- and upper estuary, being dominated by gravitational circulation in the former and fluvial discharge in the others.     

Depositional mechanics of turbulent nuées ardentes (surges) from their grain sizes

The ability of turbulent nuées ardentes (surges) to transport coarse pyroclasts has been questioned on the basis that settling velocities of coarse fragments in the deposits are much too high for them to have been supported by turbulence in a dilute gas suspension. A computer model is used to evaluate the settling velocity of pyroclasts in suspensions of varying concentration and temperature. Since suspension of grains in low-concentration surges occurs if the shear velocity exceeds the settling velocity, the shear velocities related to the 16th and 84th percentiles, and the mean of the grain-size distribution are compared in surge deposits of the Vulsini, with the shear velocity necessary to move the coarsest grain on the bed surface (the Shields criterion). The results show that the settling velocities do not vary significantly in gaseous suspensions having volume concentrations lower than 15%, and that an increase in concentration to 25% is not sufficient to decrease the settling velocity of the coarser fraction, if it represents flow shear velocity. It is shown that the settling velocity of the mean grain size (M _z ) best depicts the shear velocity of a dilute turbulent suspension. Applying the results to the May 1902 paroxysmal nuées ardentes of Mount Pelée shows that the estimated mean velocities are well within the observed velocities, and sufficient to support all the clasts in dilute, turbulent suspensions.     

Mangrove microbial diversity and the impact of trophic contamination

Mangroves are threatened ecosystems that provide numerous ecosystem services, especially through their wide biodiversity, and their bioremediation capacity is a challenging question in tropical areas. In a mangrove in Mayotte, we studied the potential role of microbial biofilm communities in removing nutrient loads from pre-treated wastewater. Microbial community samples were collected from tree roots, sediments, water, and from a colonization device, and their structure and dynamics were compared in two areas: one exposed to sewage and the other not. The samples from the colonization devices accurately reflected the natural communities in terms of diversity. Communities in the zone exposed to sewage were characterized by more green algae and diatoms, higher bacteria densities, as well as different compositions. In the area exposed to sewage, the higher cell densities associated with specific diversity patterns highlighted adapted communities that may play a significant role in the fate of nutrients.     

Effect of Surface Morphology on the Dissipation During Shear and Slip Along a Rock–Rock Interface that Contains a Visco-elastic Core

High resolution topography measurements of the Vuache–Sillingy fault (Alps, France) reveal a characteristic roughness of the fault zone. We investigate the effect of roughness on the rheology of a planar shear configuration by using a model system consisting of a visco-elastic layer embedded into a rigid solid. The model is discussed in the context of several geological cases: a damage fault zone, a fault smeared with a clay layer, and a shear zone with strain weakening. Using both analytical approaches and finite element simulations, we calculate to linear order the relation between wall roughness and the viscous dissipation in the fault zone as well as the average shear rate.