Simulation of the hydrological impacts of climate change on a restored floodplain

Thirty UK Climate Projections 2009 (UKCP09) scenarios are simulated using a MIKE SHE/MIKE 11 model of a restored floodplain in eastern England. Annual precipitation exhibits uncertainty in direction of change. Extreme changes (10 and 90% probability) range between ?27 and +30%. The central probability projects small declines (相似文献   

Assessing Methane in Shallow Groundwater in Unconventional Oil and Gas Play Areas,Eastern Kentucky

The expanding use of horizontal drilling and hydraulic fracturing technology to produce oil and gas from tight rock formations has increased public concern about potential impacts on the environment, especially on shallow drinking water aquifers. In eastern Kentucky, horizontal drilling and hydraulic fracturing have been used to develop the Berea Sandstone and the Rogersville Shale. To assess baseline groundwater chemistry and evaluate methane detected in groundwater overlying the Berea and Rogersville plays, we sampled 51 water wells and analyzed the samples for concentrations of major cations and anions, metals, dissolved methane, and other light hydrocarbon gases. In addition, the stable carbon and hydrogen isotopic composition of methane (δ¹³C‐CH₄ and δ²H‐CH₄) was analyzed for samples with methane concentration exceeding 1 mg/L. Our study indicates that methane is a relatively common constituent in shallow groundwater in eastern Kentucky, where methane was detected in 78% of the sampled wells (40 of 51 wells) with 51% of wells (26 of 51 wells) exhibiting methane concentrations above 1 mg/L. The δ¹³C‐CH₄ and δ²H‐CH₄ ranged from ?84.0‰ to ?58.3‰ and from ?246.5‰ to ?146.0‰, respectively. Isotopic analysis indicated that dissolved methane was primarily microbial in origin formed through CO₂ reduction pathway. Results from this study provide a first assessment of methane in the shallow aquifers in the Berea and Rogersville play areas and can be used as a reference to evaluate potential impacts of future horizontal drilling and hydraulic fracturing activities on groundwater quality in the region.     

Reassessing southern African silcrete geochemistry: implications for silcrete origin and sourcing of silcrete artefacts

A synthesis of the geochemistry of silcretes and their host sediments in the Kalahari Desert and Cape coastal zone, using isocon comparisons, shows that silcretes in the two regions are very different. Kalahari Desert silcretes outcrop along drainage-lines and within pans, and formed by groundwater silicification of near-surface Kalahari Group sands. Silicification was approximately isovolumetric. Few elements were lost; silicon (Si) and potassium (K) were gained as microquartz precipitated in the sediment porosity and glauconite formed in the sub-oxic groundwater conditions. The low titanium (Ti) content reflects the composition of the host sands. Additional elements in the Kalahari Desert silcretes were supplied in river water and derived from weathering of silicates in basement rocks. Evaporation under an arid climate produced high-pH groundwater that mobilized and precipitated Si; this process is still occurring. In the Cape coastal zone, pedogenic silcretes cap hills and plateaus, overlying deeply weathered argillaceous bedrock. Silicification resulted from intensive weathering that destroyed the bedrock silicates, almost completely removing most elements and causing a substantial volume decrease. Some of the silica released formed a microcrystalline quartz matrix, and most Ti precipitated as anatase, so the Cape silcretes contain relatively high Ti levels. The intense weathering that formed the Cape silcretes could have occurred in the Eocene, during and after the Palaeocene-Eocene Thermal Maximum, when more acidic rainfall and high temperatures resulted in intensified silicate weathering worldwide. This could have been responsible for widespread formation of pedogenic silcretes elsewhere in Africa and around the globe. Trace element sourcing of silcrete artefacts to particular outcrops has most potential in the Cape, where differences between separate bedrock areas are reflected in the silcrete composition. In the Kalahari Desert, gains of some elements can override compositional differences of the parent material, and sourcing should be based on elements that show the least change during silicification. © 2020 John Wiley & Sons, Ltd.     

Influence of beach morphodynamics on the bivalve Donax hanleyanus and Mesodesma mactroides populations in Argentina

Five exposed microtidal sandy beaches of North-eastern Buenos Aires (Argentina) were analysed to evaluate the influence of coastal dynamics on the abundance of the intertidal clams Donax hanleyanus and Mesodesma mactroides over a 1-year period. The physical characterisation of each beach was performed using 15 environmental variables and six morphodynamic indices. The population densities of both clam species were estimated by the number of individuals per strip-transect. Analysis of similarities revealed a significant multivariate environmental difference among beaches, which could be aggregated into a northern and a southern group. The former group was characterised by an intermediate morphodynamic state and by having, in general, high density values for both clam species. The latter was composed of beaches with an intermediate reflective state and showed, in general, low density values. Beach Index and Area showed the lowest temporal variation. Total density values, as well as density values of recruits and adults of D. hanleyanus and M. mactroides did not follow a north–south latitudinal gradient. Spatial and temporal fluctuations of density values were best explained by changes in individual physical variables rather than by changes in composite indices.     

Fostering sustainable behaviours in community-based co-managed fisheries

This paper examines the use of community-based social marketing (CBSM) techniques to encourage more sustainable behaviors within community-based co-managed (CBCM) fisheries. An overview of the CBSM theory and practice is provided along with an evaluation of how CBSM has been successfully used to foster sustainable behaviors in other analogous resource management sectors (e.g., agriculture). It is argued that CBSM is highly conducive to CBCM fisheries arrangements due to the shared goals of stakeholder participation and empowerment and that, currently, CBSM has been overlooked as a tool for fostering more sustainable behaviors, particularly in the case of CBCM fisheries.     

Field investigation of ridge–runnel dynamics on an intertidal mudflat

Flow-parallel linear ridge–runnel (R–R) bedforms composed of mainly cohesive sediments have been investigated at an intertidal site located at Hills Flats in the Severn Estuary, UK. It is argued that the sequences of sand–mud laminae in the ridge sediments indicate strongly that R–R are depositional bedforms. Faint R–R topography scoured in the underlying soft bedrock and parallel rows of coarser particle now found at the base of ridges are evidence of secondary vortices that may have provided a catalyst for mud ridge growth. Bed shear stress remains below the erosion threshold for all but the most recent and weak surficial mud deposits which are removed by evorsion [mechanical erosion by turbulent flows that may also carry sand and/or gravel] during Spring tidal flow ca. 60 cm/s. Differences in flow characteristics between ridges and runnel are minor. Corrasion [to erode or be eroded by abrasion] by sparse coarse sediment largely prevents net deposition in the runnels. Over time a slight imbalance between mud deposition and erosion rates allows slow growth of the ridges suggesting that these mudflats may be especially sensitive to slight changes in the local hydrodynamic regime and/or sediment supply.     

Equatorial influence of QuikSCAT winds in an isopycnal ocean model compared to NCEP2 winds

An ocean model was used to examine whether the scatterometer winds can improve the model performance both dynamically and thermodynamically. Comparisons were done using QuikSCAT and NCEP2 winds for both the mean and variability from 2000 to 2004. The comparisons showed that the model forced by QuikSCAT winds gives more realistic mean SST, 20 °C isotherm depth (Z20), and latent heat flux than NCEP2 winds do. Sensitivity experiments indicated that QuikSCAT mean wind stress is important for the improved mean SST, Z20, and latent heat release to the atmosphere in the eastern Pacific. QuikSCAT wind speed, through its effect on the turbulent heat fluxes, is most important for the mean SST in the western Pacific. Finally, there were comparable correlations with observations of both SST and Z20 on the intra-seasonal time scale between the model forced with QuikSCAT winds and the model forced with NCEP2 winds.     

A three-dimensional numerical study of river plume mixing processes in Otsuchi Bay,Japan

The three-dimensional numerical model SUNTANS is applied to investigate river plume mixing in Otsuchi Bay, an estuary located along the Sanriku Coast of Iwate, Japan. Results from numerical simulations with different idealized forcing scenarios (barotropic tide, baroclinic tide, and diurnal wind) are compared with field observations to diagnose dominant mixing mechanisms. Under the influence of combined barotropic, baroclinic and wind forcing, the model reproduces observed salinity profiles well and achieves a skill score of 0.94. In addition, the model forced by baroclinic internal tides reproduces observed cold-water intrusions in the bay, and barotropic tidal forcing reproduces observed salt wedge dynamics near the river mouths. Near these river mouths, vertically sheared flows are generated due to the interaction of river discharge and tidal elevations. River plume mixing is quantified using vertical salt flux and reveals that mixing near the vicinity of the river mouth, is primarily generated by the barotropic tidal forcing. A 10 ms^?1 strong diurnal breeze compared to a 5 ms^?1 weak breeze generates higher mixing in the bay. In contrast to the barotropic forcing, internal tidal (baroclinic) effects are the dominant mixing mechanisms away from the river mouths, particularly in the middle of the bay, where a narrow channel strengthens the flow speed. The mixing structure is horizontally asymmetric, with the middle and northern parts exhibiting stronger mixing than the southern part of the bay. This study identifies several mixing hot-spots within the bay and is of great importance for the coastal aquaculture system.     

Basalt–trachybasalt samples in Gale Crater,Mars

The ChemCam instrument on the Mars Science Laboratory (MSL) rover, Curiosity, observed numerous igneous float rocks and conglomerate clasts, reported previously. A new statistical analysis of single‐laser‐shot spectra of igneous targets observed by ChemCam shows a strong peak at ~55 wt% SiO₂ and 6 wt% total alkalis, with a minor secondary maximum at 47–51 wt% SiO₂ and lower alkali content. The centers of these distributions, together with the rock textures, indicate that many of the ChemCam igneous targets are trachybasalts, Mg# = 27 but with a secondary concentration of basaltic material, with a focus of compositions around Mg# = 54. We suggest that all of these igneous rocks resulted from low‐pressure, olivine‐dominated fractionation of Adirondack (MER) class‐type basalt compositions. This magmatism has subalkaline, tholeiitic affinities. The similarity of the basalt endmember to much of the Gale sediment compositions in the first 1000 sols of the MSL mission suggests that this type of Fe‐rich, relatively low‐Mg#, olivine tholeiite is the dominant constituent of the Gale catchment that is the source material for the fine‐grained sediments in Gale. The similarity to many Gusev igneous compositions suggests that it is a major constituent of ancient Martian magmas, and distinct from the shergottite parental melts thought to be associated with Tharsis and the Northern Lowlands. The Gale Crater catchment sampled a mixture of this tholeiitic basalt along with alkaline igneous material, together giving some analogies to terrestrial intraplate magmatic provinces.     

Dynamic interaction between impact melt and fragmented basement at Manicouagan: The suevite connection

The interface between impact melt rocks and underlying footwall lithologies within the Manicouagan impact structure is defined by a zone of dynamic mixing (<20 m thick). This zone transitions as a continuum from clast‐free to clast‐bearing impact melt rocks, through melt‐bearing breccias to melt‐free breccias. Field observations; microscopy; and major, trace, and rare earth element analysis indicate that the breccias are derived by blending two endmembers during the impact process: impact melt and brecciated footwall. The product is a basal breccia sequence, which locally includes the rock type referred to as suevite. In this occurrence, the suevite is a submelt sheet variety, in contrast to similar lithologies that are developed atop impact melt sheets, or beyond crater rims. Dynamic mixing between impact melt and basal clastic material at Manicouagan is attributed to the initial high‐speed centrifugal outflow of superheated, low viscosity impact melt over underlying fractured and fragmented footwall, and its centripetal return during the earlier stages of the crater modification process. The interaction of two fluids (melt with a mobilized granular medium) possessing contrasting densities, and moving at different velocities, can facilitate shear instabilities and turbulent mixing that may be characteristic of Kelvin–Helmholtz behavior.