Gold in “primitive” Archaean volcanics

Gold concentrations have been determined by neutron activation in sixteen samples of komatiites and related rocks from Barberton, South Africa. All the rocks give Au values in the ranges 1–1.5 ppb with no evidence for anomalously high values in such old primitive igneous types. As the rocks are extensively hydrated, it is possible that Au has been leached from the rocks during later hydration processes.     

Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.     

Catabolic and anabolic energy for chemolithoautotrophs in deep-sea hydrothermal systems hosted in different rock types

Active deep-sea hydrothermal vents are hosted by a range of different rock types, including basalt, peridotite, and felsic rocks. The associated hydrothermal fluids exhibit substantial chemical variability, which is largely attributable to compositional differences among the underlying host rocks. Numerical models were used to evaluate the energetics of seven inorganic redox reactions (potential catabolisms of chemolithoautotrophs) and numerous biomolecule synthesis reactions (anabolism) in a representative sampling of these systems, where chemical gradients are established by mixing hydrothermal fluid with seawater. The wide ranging fluid compositions dictate demonstrable differences in Gibbs energies (ΔG_r) of these catabolic and anabolic reactions in three peridotite-hosted, six basalt-hosted, one troctolite-basalt hybrid, and two felsic rock-hosted systems. In peridotite-hosted systems at low to moderate temperatures (<∼45 °C) and high seawater:hydrothermal fluid (SW:HF) mixing ratios (>10), hydrogen oxidation yields the most catabolic energy, but the oxidation of methane, ferrous iron, and sulfide can also be moderately exergonic. At higher temperatures, and consequent SW:HF mixing ratios <10, anaerobic processes dominate the energy landscape; sulfate reduction and methanogenesis are more exergonic than any of the aerobic respiration reactions. By comparison, in the basalt-hosted and felsic rock-hosted systems, sulfide oxidation was the predominant catabolic energy source at all temperatures (and SW:HF ratios) considered. The energetics of catabolism at the troctolite-basalt hybrid system were intermediate to these extremes. Reaction energetics for anabolism in chemolithoautotrophs—represented here by the synthesis of amino acids, nucleotides, fatty acids, saccharides, and amines—were generally most favorable at moderate temperatures (22-32 °C) and corresponding SW:HF mixing ratios (∼15). In peridotite-hosted and the troctolite-basalt hybrid systems, ΔG_r for primary biomass synthesis yielded up to ∼900 J per g dry cell mass. The energetics of anabolism in basalt- and felsic rock-hosted systems were far less favorable. The results suggest that in peridotite-hosted (and troctolite-basalt hybrid) systems, compared with their basalt (and felsic rock) counterparts, microbial catabolic strategies—and consequently variations in microbial phylotypes—may be far more diverse and some biomass synthesis may yield energy rather than imposing a high energetic cost.     

The nature and genesis of marginal Cu–PGE–Au sulphide mineralisation in Paleogene Macrodykes of the Kangerlussuaq region, East Greenland

The Kangerlussuaq region of East Greenland hosts a variety of early Tertiary extrusive and intrusive igneous rocks related to continental break up and the passage of the ancestral Iceland plume. These intrusive bodies include a number of gabbroic macrodykes, two of which—the Miki Fjord Macrodyke, and the newly discovered Togeda Macrodyke—contain Cu–PGE–Au sulphide mineralisation along their margins. Sulphides occur as disseminated interstitial blebs and rounded globules of chalcopyrite and pyrrhotite with some Fe–Ti oxides and platinum-group minerals, comprising largely Pd bismuthides and tellurides. The globules are interpreted to have formed from fractionation of trapped droplets of an immiscible Cu- and Pd-rich sulphide melt and show geopetal indicators. Sulphur isotopes imply a local crustal source of S in these from pyritic sediments of the Kangerlussuaq Basin. Thus, generation of these sulphide occurrences was controlled by local country rock type. Low Ni/Cu and Pt/Pd ratios, also present in the Platinova reefs in the Skaergaard Intrusion, indicate that early fractionation of olivine may have depleted the magma of Ni and suggest the likely presence of a large magma chamber at depth. Xenoliths of Ni-rich olivine cumulates in the Miki Fjord Macrodyke may have been sourced from such a body. The location of thus far unidentified conduit or feeder zones to the macrodykes beneath the present day surface may represent potential targets for more massive sulphide orebodies.     

Geotechnical characterisation of Obudu damsite, Obudu, south-eastern Nigeria

The Obudu dam is being built across Abeb river in Obudu area of the Cross River State (Nigeria). The earthfill dam will be approximately 18 m high with a crest length of 385 m. The dam site is located within part of the Obudu crystalline basement plateau which is a region of low seismicity. The terrain is smoothly undulating and low lying and was known to be composed of unclassified basement and decomposed bedrock (overburden). The present study was carried out to assess the suitability of the chosen dam axis based on the determination of the nature and geotechnical characteristics of the overburden and bedrock. The investigation included geophysical surveys, bearing capacity tests (cone penetrometer and standard penetration), classification and grain size distribution as well as tests for compaction, consolidation and compressive strength. The results show that the bedrock is heterogeneous, including gneisses sillimanite, biotite and granite types), dolerite, quartzite and pegmatite with an overall moderate strength (about 76.04 MN m⁻² average) and fair rock mass rating (RMR). The bedrock along the dam axis is apparently lacking in major fractures which could lead to short circuiting of the future impoundment. The overburden (soil) comprises silt (MH, ML), silty clay (CL) and silty sand (SM) with a combined thickness of about 2–20 m, increasing away from the valley floor towards the shoulders. Generally the overburden is of suitable compressive strength (150–300 KN m⁻²), low to medium plasticity and swelling potential and low permeability (up to 1.41 × 10⁻⁷ ms⁻¹) which would ensure a tight reservoir. The material settlement is expected to be small and slow. Accordingly, excavation of up to 5 m, decreasing towards the valley shoulders has been suggested to expose the recommended bearing medium: fresh/competent bedrock and overburden in the valley floor and flanks, respectively. While a detailed investigation of burrow areas was not part of the present study, a few potential sites in the dam axis and reservoir areas have been suggested based on the evaluation of material properties.     

<Emphasis Type="Italic">BV I</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript> photometry of RR Lyrae stars

We have obtained 26 372 CCD frames in the B, V, and I _c filters for 81 RR Lyrae stars in 2008–2010, using the 76-cm telescope of the South African Astronomical Observatory and the 40-cm telescope of the Cerro Armazones Observatory, North Catholic University (Chile) using an SBIG ST-10XME CCD camera. For 12 of these RR Lyrae stars, we also obtained 337 brightness measurements in the B and V bands in 2000–2001 using the 60-cm telescope of the High Altitude Mt. Maidanak Observatory (Republic of Uzbekistan). We present tables of observations, light curves, and improved light-curve elements for all these RR Lyrae stars. The Blazhko effect was detected for SU Hor.     

Structural, chemical, and isotopic microanalytical investigations of graphite from supernovae

We report the results of coordinated ion microprobe and transmission electron microscope (TEM) studies of presolar graphites from the KE3 separate (1.65-1.72 g/cm³) of the Murchison CM2 meteorite. Isotopic analysis of individual graphites (1-12 μm) with the ion microprobe shows many to have large ¹⁸O excesses combined with large silicon isotopic anomalies, indicative of a supernova (SN) origin. Transmission electron microscopy (TEM) of ultramicrotome slices of these SN graphites revealed a high abundance (25-2400 ppm) of internal titanium carbides (TiCs), with a single graphite in some cases containing hundreds of TiCs. Isotopic compositions of individual TiCs by nanoscale resolution secondary ion mass spectrometry (NanoSIMS) confirmed their presolar origin. In addition to TiCs, composite TiC/Fe grains (TiCs with attached iron-nickel subgrains) and solitary kamacite internal grains were found. In the composite grains, the attached iron phase (kamacite [0-24 at. % Ni] or taenite [up to 60 at. % Ni]) was epitaxially grown onto one or more TiC faces. In contrast to the denser Murchison KFC1 graphites, no Zr-Ti-Mo carbides were observed. The average TiC diameters were quite variable among the SN graphites, from 30 to 232 nm, and were generally independent of the host graphite size. TiC grain morphologies ranged from euhedral to anhedral, with the grain surfaces exhibiting variable degrees of corrosion, and sometimes partially amorphous rims (3 to 15 nm thick). Partially amorphous rims of similar thickness were also observed on some solitary kamacite grains. We speculate that the rims on the internal grains are most plausibly the result of atom bombardment caused by drift of grains with respect to the ambient gas, requiring relative outflow speeds ∼100 km/s (i.e., a few percent of the SN mass outflow speed).Energy dispersive X-ray spectrometry (EDXS) of TiCs revealed significant V in solid solution, with an average V/Ti ratio over all TiCs of ∼83% of the solar value of 0.122. Significant variations about the mean V/Ti ratio were also seen among TiCs in the same graphite, likely indicating chemical equilibration with the surrounding gas over a range of temperatures. In general, the diversity in internal TiC properties suggests that TiCs formed first and had substantially diverse histories before incorporation into the graphite, implying some degree of turbulent mixing in the SN outflows.In most graphites, there is a decrease in the number density of TiCs as a function of increasing radial dis- tance, caused by either preferential depletion of TiCs from the gas or an acceleration of graphite growth with decreasing ambient temperature. In several graphites, TiCs showed a trend of larger V/Ti ratios with increasing distance from the graphite center, an indication of progressive equilibration with the surrounding gas before they were sequestered in the graphites. In all but one graphite, no trend was seen in the TiC size vs. distance from the graphite center, implying that appreciable TiC growth had effectively stopped before the graphites formed, or else that graphite growth was rapid compared to TiC growth. Taken together, the chemical variations among internal grains as well as the presence of partially amorphous rims and epitaxial Fe phases on some TiCs clearly indicate that the phase condensation sequence was TiC, followed by the iron phases (only found in some graphites) and finally graphite. Since graphite typically condenses at a higher temperature than iron at low pressures (<10⁻³ bars) in a gas with C > O and otherwise solar composition, the observed condensation sequence implies a relative iron enrichment in the gas or greater supersaturation of graphite relative to iron.The TEM observations allow inferences to be made about the physical conditions in the gas from which the grains condensed. Given the TiC sizes and abundances, the gas was evidently quite dusty. From the observed TiC size range of ∼20 nm to ∼500 nm (assuming ∼1 yr growth time and T ∼ 1800°K), we infer minimum Ti number densities in the gas to be ∼7 × 10⁴ to ∼2 × 10⁶ atoms/cc, respectively. Although the gas composition is clearly not solar, for scale, these number densities would correspond to a pressure range of ∼0.2 μbar to ∼5.0 μbar in a gas of solar composition. They also correspond to minimum TiC grain number densities of ∼3 × 10⁻⁴ to ∼0.2 grains/cc, assuming complete condensation of Ti in TiC. We estimate the maximum ratio of mean TiC grain separation distance in the gas to grain diameter from the Ti number densities as ∼3 × 10⁵ to ∼1 × 10⁶.