Heterogenity of planetesimal collisional plume probed by glass inclusions in metal globules of Sierra Gorda 013, an unusual CBa-like chondrite

Metal-rich carbonaceous CB chondrites are generally assumed to be materials accreted from the gas–dust plume formed in catastrophic collisions of planetesimals, at least one of which was differentiated into a metal core and silicate shell. Micron-sized inclusions of siliceous alkali-rich glasses associated with sulfides were found in the metal globules of the Sierra Gorda 013 (SG 013), a CBa-like chondrite. These inclusions are unusual carriers of volatile alkalis which are commonly depleted in CB chondrites. The inclusions are presented by two types: (1) Al-bearing Nb-poor glass associated with daubréelite and (2) Nb-bearing Ca,Al,Mg-poor glass associated with an unknown Na-bearing Cr-sulfide. The glass compositions do not correspond to equilibrium condensation, evaporation, or melting. The Nb-bearing glass has a superchondritic Nb/Ta ratio (31) most likely indicating the fractionation of Nb and Ta in the high-temperature gas–dust impact plume due to condensation from vapor or evaporation of precursor Nb-rich particles. The glasses are interpreted as reaction products between refractory plume condensate particles (or possibly planetary or chondritic solids) with relatively low-temperature K-Na-Si-rich gas in oxidized conditions, possibly in a common plume vapor reservoir. Compositional differences indicate that the glasses and sulfides originated from several different sources under different fO₂, fS₂, and T conditions and were likely combined together and transported to the metal globule formation region by material flows in the heterogeneous impact plume. The glass–sulfide particles were enclosed in the globules aggregated from smaller solid or molten metal grains. The metal globules were further melted during transport to the high-temperature plume region or by plume shockwave heating. Thus, the composition of the glasses, the host metal, and the main mass of SG 013 shows dynamic heterogeneity of physical conditions and impact plume composition after a large-scale planetesimal collision.     

Space based disaster management of 2008 Kosi floods,North Bihar,India

One of the most important elements in flood disaster management is the availability of timely information for taking decisions and actions by the authorities. During the August 18, 2008 Kosi floods which impacted India and Nepal and affected more than three million people, aero-space technology proved to be a critical input for providing vital information on flood inundation. The satellite based flood inundation maps were extensively used for identifying marooned villages, submerged roads and railway tracks and carrying out the relief and rescue operations by the state agencies. Decision Support Centre (DSC) at National Remote Sensing Centre (NRSC) kept a constant watch on the flood situation. More than 200 flood inundation maps, using about 30 satellite datasets were generated and provided in near real time mode to the state agencies during August to October, 2008. DSC efforts were primarily focused in providing an overall picture of the flood situation in a short span of time to the state agencies. The present paper discusses about the operational use of remote sensing technology for near real time flood mapping, monitoring of Kosi floods and the satellite based observations made for the Kosi river breach.     

Uptake of plutonium from seawater and sediment by a marine polychaete worm

The results of the uptake of plutonium 239 from sediment by a marine polychaete wormNereis diversicolor is reported in the present paper. A comparison is made of the relative importance of two possible uptake pathways, sediment and seawater by which this worm may obtain its plutonium body-burden. Under the laboratory conditions used for the comparison of those two routes it would appear thatNereis obtains greater than 98% of its body activity from seawater.     

Random wave-current interactions in water of varying depth

Refraction of incoherent random gravity waves with currents and bottom topography results in spatial variations in the spectral characteristics of the free surface. Prediction of such variations based on the radiation transfer equation is in a simple analytic form for the case of one dimensional inhomogeneities in currents and topography. This analytic form is examined in terms of two-dimensional wave number- and polar frequency-direction spectra along the associated dynamic and kinematic constraints relevant to wave breaking and reflection. Results are specialized to the simplest case of horizontal shear currents in deep and shallow water with explicit examples to illustrate the relative and combined effects of currents and topography on free surface spectra.     

Roughness length in the turbulent Ekman layer above the sea bed

Roughness lengths were determined from average current profiles in the logarithmic boundary layer at a site in the southern North Sea. Grab samples indicated that the bed configuration controlling the bed roughness was unlikely to change even at maximum spring tides, but the measured roughness lengths were found to decrease as the speed of the flow 10 m above the bed increased. This has been qualitatively interpreted in terms of the size of the turbulent eddies within the flow and their effectiveness at “feeling” the size of the elements forming the bed roughness. It is also shown that the dependence of the observed drag coefficient on the Rossby number follows closely the theoretical form when the roughness length decreases with increasing flow speed.     

Characteristics of Salter's cam for extracting energy from ocean waves

The performance of Salter's cam as an energy extractor from ocean waves is studied numerically on the basis of linear theory of surface waves and floating bodies. Quantities of engineering interest such as efficiency, induced motion and reaction forces are presented and discussed both for fixed and for partly constrained cam shafts.     

Seasonal and spatial variation in abundance and egg production of Paracalanus parvus (Copepoda: Calanoida) in/out Jiaozhou Bay, China

The spatial distribution of stage-specific abundance and reproduction of the copepod Paracalanus parvus were studied from October 2005 to September 2006 in the Jiaozhou Bay. This copepod occurred continuously in this bay throughout the year. The species reached the lowest abundance in April and peaked in June. From October to December, distribution center mainly occurred in offshore water and at the mouth of the bay. In winter, early copepodites and adults gradually decreased and till February, most of the population was only comprised of CIV–CV stages. Overwintering copepodites matured in March and males tended to mature before female. From May to September, each stage occurred in the population and gradually reached high abundance. Temperature and chlorophyll a (Chl-a) concentration in the three stations can't clearly explain the seasonal variation in stage-specific abundance, so we surmised the important effect of the Yellow Sea. Egg production rate (EPR) reached its lowest in winter and peaked in June at 60.8 eggs female⁻¹ day⁻¹ in nearshore water. In the warming period, EPR in nearshore water was statistically higher and EPR > 10 eggs female⁻¹ day⁻¹ lasted longer than that in offshore water, showing the importance of nearshore water for recruitment of P. parvus. Our study showed that EPR was positively related to temperature and total chlorophyll a in offshore water and mouth of the bay. In nearshore water, the relationships between EPR and temperature and Chl-a in three size fractions were not the same as those in offshore water, suggesting complicated ecosystem in such a eutrophic area in warming period.     

Performance efficiency of swim fins

Design improvements on swim fins are most difficult, if not impossible, to assess quantitatively by swimmers alone. In order to make reliable measurements of swim fin performance, an instrumented mechanical swimming device was developed and operated in a water tank. Using this facility, the performance of the more popular conventional fins and that of a new design concept were evaluated. The comparative performance of the various fins was correlated with their physical characteristics.     

Studies on the determination of inorganic iodine in seawater

Existing methods for the determination of the various forms of iodine present in seawater are laborious or unwieldy in use. This paper describes modified forms of the iodate and total iodine methods described by Barkley and Thompson (1960), a spectrophotometric procedure for iodate determination derived from Johannesson's (1958) work, and an automatic method for total iodine determination. Procedures for iodate and total-iodine determination which are suitable for use aboard ship, are recommended. Both procedures for iodate determination returned a standard deviation close to 0.5 μg/l when several replicate samples of a seawater containing approximately 30 μg/l of iodate-iodine were analysed. The automatic method for total iodine determination yielded a standard deviation of 0.8 μg/l by the repeated analysis of a seawater containing a total of approximately 50 μg/l of iodine. Suitable methods for the filtration and storage of seawater are also described.     

Deep tow studies of the Tamayo transform fault

The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.