Benthic nitrate biogeochemistry affected by tidal modulation of Submarine Groundwater Discharge (SGD) through a sandy beach face, Ria Formosa, Southwestern Iberia

To investigate both the role of tides on the timing and magnitude of Submarine Groundwater Discharge (SGD), and the effect on benthic nitrogen biogeochemistry of nitrate-enriched brackish water percolating upwards at the seepage face, we conducted a study of SGD rates measured simultaneously with seepage meters and mini-piezometers, combined with sets (n = 39) of high resolution in-situ porewater profiles describing NH₄⁺, NO₃⁻, Si(OH)₄ and salinity distribution with depth (0–20 cm). Sampling took place during two consecutive spring tidal cycles in four different months (November 2005, March, April and August 2006) at a backbarrier beach face in the Ria Formosa lagoon, southern Portugal. Our results show that the tide is one of the major agents controlling the timing and magnitude of SGD into the Ria Formosa. Intermittent pumping of brackish, nitrate-bearing water at the beach face through surface sediments changed both the magnitudes and depth distributions of porewater NH₄⁺ and NO₃⁻ concentrations. The most significant changes in nitrate and ammonium concentrations were observed in near-surface sediment horizons coinciding with increased fraction of N in benthic organic matter, as shown by the organic C:N ratio. On the basis of mass balance calculations executed on available benthic profiles, providing ratios of net Ammonium Production Rate (APR) to Nitrate Reduction Rate (NRR), coupled to stoichiometric calculations based on the composition of organic matter, potential pathways of nitrogen transformation were speculated upon. Although the seepage face occasionally contributes to reduce the groundwater-borne DIN loading of the lagoon, mass balance analysis suggests that a relatively high proportion of the SGD-borne nitrogen flowing into the lagoon may be enhanced by nitrification at the shallow (1–3 cm) subsurface and modulated by dissimilatory nitrate reduction to ammonium (DNRA).     

Benthic mineralization rates at two locations in the southern North Sea

Benthic oxygen uptake, sulphate reduction and benthic bacterial production were measured at two contrasting locations in the southern North Sea: the shallow and turbulent Broad Fourteens area in the Southern Bight, and the deeper Oyster Grounds, a deposition area, where thermohaline stratification occurs during summer. Oxygen uptake and sulphate reduction showed a clear seasonal pattern in the Broad Fourteens area, indicating a supply of carbon to the benthic system that is closely related to the standing stock of carbon in the water column. This close benthic-pelagic coupling is probably due to the influence of the tide in this part of the North Sea, which keeps the water column permanently mixed. At the Oyster Grounds, no seasonal pattern was observed. Peaks in oxygen uptake and sulphate reduction were found in winter. Irregularly occurring events, such as storms and fishery-related activities, are likely to affect the benthic mineralization patterns in this area. Annual benthic carbon mineralization rates estimated from oxygen uptake rates were 44 gC·m⁻² at the Broad Fourteens, and 131 gC·m⁻² at the Oyster Grounds, of which 26 and 28%, respectively, could be attributed to sulphate reduction (assuming an annual sulphide reoxidation rate of 100%). Although sulphate reduction rates in the southern North Sea are higher than previously suggested, aerobic respiration is the most important pathway for benthic carbon mineralization at the stations visited. Production rates of benthic bacterial carbon measured with labelled leucine were much higher than carbon mineralization rates based on oxygen uptake or sulphate reduction. This may either imply a very high bacterial carbon conversion efficiency, or point to shortcomings in the accuracy of the techniques. A critical evaluation of the techniques is recommended.     

Geometrical aspects of a sonar-based navigation system for underwater vehicles

A novel self-contained navigation system has been devised for underwater vehicles operating in and around offshore installations. This system matches data from a sector-scanning sonar device to a computer model of the installation. The paper begins by highlighting the existing approaches to subsea navigation before outlining the main features of the proposed system. It then concentrates on a key component of this system which is a method for calculating the position and heading of an underwater vehicle navigating in the vincinity of tubular steel structures. An iterative solution method is presented which incorporates six degree of freedom vehicle motions and this is verified in a series of laboratory experiments with various arrangements of structural members and using a commercial sonar device. The key features, applications and performance of this method are discussed. The main conclusion is that the proposed method for calculating the position and heading of an underwater vehicle contributes towards achieving an accurate and reliable subsea navigation capability.     

Analytical investigations on loop-manoeuvre of underwater towed cable-array system

The paper reports on analytical case studies on the loop manoeuvre of an underwater towed cable-array system to give an insight into the tactical aspects of their naval applications. The analytical formulation and the solution procedure adopted for this three dimensional dynamic problem is also described. The case studies have been carried out for different loop radii, tow lengths, tow speeds and truncated loops. The resulting X,Y,Z co-ordinates of the towed cable-array and tow-point tensions have been computed. Based on these results, the tow-length to loop radii ratio, leading to cable-array system looping, has been found. The values of speed reduction and turning radius, causing dangerous relaxation in tow-point tension have been worked out. After exit from the loop, the timing required for realignment of the cable-array system with the ship's heading can be obtained from plots of the results. These timings help to plan ship manoeuvres to optimise reestablishment of stable listening conditions during underwater surveillance.     

Near-surface seismic facies at the Korea Strait shelf margin and trough region

High-resolution seismic profiles across the shelf margin and trough region of the Korea Strait reveal five shallow, near-surface facies units. These are relict coastal deposits, relict delta deposits, slumps and slides, and trough lag deposits. Most deposits represent a lowstand systems tract, formed during the last lowstand of sea level. Relict coastal deposits represent a linear sediment body along the present shelf margin at water depths of 120–150 m, whereas relict delta deposits occur on the gentle, southwestern slope of the trough at water depths of about 150–200 m. Slumps and slides are dominant at the base of slope in the central trough region. Sediments on the central trough floor were partly eroded and redistributed by strong currents, resulting in lag deposits.     

Cenozoic tectonics of Amazon Mouth Basin

 The Cenozoic shelf margin of the Amazon Mouth Basin is characterized by a thick prograding prism of siliciclastic sediments. This prism, composed mainly of Upper Miocene and younger sediments, overlies a Lower Tertiary carbonate shelf. Two tectonic–sedimentary models for the area were developed with the aid of new deep-reflection seismic data. Gravitational tectonics dominate the regional geological framework. Tensional stresses are created near the shelf margin, and compressional features dominate at the base of the slope. The morphology of this compressional zone is closely associated with the St. Paul Fracture Zone and the boundary between continental and oceanic crusts. Received: 20 August 1996 / Revision received: 11 June 1998     

On the choice of data transformation for modelling time series of significant wave height

Autoregressive models have been shown to adequately model the time series of significant wave height. However, since this series exhibits a seasonal component and has a non-gaussian nature, it is necessary to transform the series before a model can be fit to the data. Two different transformations that have been used in earlier work are shown not to be appropriate for all types of applications. A third transformation is proposed here, which combines the better features of the two earlier ones and which is appropriate for simulation work. This is demonstrated with an example of a series from Figueira da Foz, a location of the Portuguese Coast.     

Surfactant components of marine organic matter as agents for biogeochemical fractionation and pollutant transport via marine aerosols

The role of surfactant organic matter in marine aerosol production has been studied under conditions in which there is a large coverage of whitecaps on the sea surface. To improve the knowledge of matter exchange and pollutant recycling from the sea surface into the atmosphere, a spray drop adsorption model (SDAM) was developed and the validity of the proposed model verified by the following experimental results: (1) an increase of surfactant matter on the sea surface during rough sea conditions (‘surface wave concentration'); (2) an (hyperbolic-like) increase of the enrichment ratio (ER) of surfactant fluorescent organic matter (SFOM), made up predominantly by humic substances (HS), as the particle size decrease; (3) a similar behaviour for elements with pollutant properties, and which are known to interact with HS and other surfactant materials, considered pollution tracers. An additional laboratory experiment, based on the adsorption model conditions, gives enrichment ratio greater than unity for K and Ca. The first results on marine aerosols trapped in marine clouds (at 1000 m above sea level and at 100 km from the coast) seem to further support the proposed model and its ability to predict the transition from saline to almost entirely organic particles for the smaller fractions of marine aerosols. The possible contribution of these particles to the recycling and to the long range transport of pollutants via marine aerosols has been considered.     

Determination of water component age in ocean models: application to the fate of North Atlantic Deep Water

A method allowing the calculation of both concentration and age of an individual water component is used to examine the penetration and fate of North Atlantic Deep Water (NADW) in a global ocean model. The method is consistent with the recent theory of water component age by Delhez et al. Its application in ocean models is straightforward and involves specification of two ideal tracers, and its efficacy is verified here via comparison with water component ages obtained by a second method, involving the time history of a single ideal tracer, and whose application is rather more restricted. Age estimates by the two methods are compared in the case of an interior ocean source region (suitable for marking the model's NADW, and forming the main focus of the study) and in the case of a ocean surface source region (featuring high density surface water in the far Northern Atlantic). The concentration and age of NADW are determined for two versions of the model, differing only in the inclusion or exclusion of isoneutral diffusion. The age and, especially, the concentration of NADW in the deep Southern, Indian and Pacific Oceans are significantly lower in the version with isoneutral diffusion. Both versions indicate that most of the NADW ultimately reaches the surface in the model Southern Ocean.