Cretaceous metamorphism in the Austroalpine Matsch Unit (Eastern Alps): The interrelation between deformation and chemical equilibration processes

In the polymetamorphic Austroalpine Matsch Unit (European Eastern Alps) Cretaceous upper greenschist facies metamorphism overprinted Variscan and Permian magmatic and metamorphic assemblages. Mineral compositional and (micro-)structural data of metapelites and metapegmatites document different mechanisms of interrelated deformation and (re-)equilibration during Cretaceous overprinting: i) Microfractures in relic garnet represented pathways for material transport, and thus established material exchange between intragranular domains and the matrix. Major element equilibration by fast diffusion along microfractures contrasts with limited volume diffusion in adjacent host garnet. ii) Syn-tectonic breakdown of staurolite initially to paragonite, then chloritoid allows correlating reaction progress with the formation of different fracture sets. iii) Syn-tectonic mineral growth with shape-preferred orientation in foliation domains contrasts with radial growth in microlithons and strain shadows of the mylonitic foliation. iv) Syn-tectonic unmixing of pre-existing oligoclase (an_14–16) produced fine-grained aggregates of two supposedly coexisting plagioclase-phases (an_3–6 and an_20–25) in strain shadows of the oligoclase-clasts. v) Pre-existing deformation-induced heterogeneities in the spatial distribution of phases and their preferred orientation influence the kinetics of phase equilibration. Understanding the mechanisms of the mutual interrelation between deformation and phase equilibration is a prerequisite for deducing PT-constraints from strained metamorphic rocks. New garnet—whole rock Sm-Nd data from metapegmatites indicate their emplacement at 263–280 Ma and provide an important age constraint on the interrelated deformation and re-equilibration processes.     

On-chip earthquake simulation model using potentials

A two-dimensional (2-D) Cellular Automata (CA) dynamic system constituted of cells-charges has been proposed for the simulation of the earthquake process. The CA model has been calibrated with the use of real data. The calibration incorporates major seismic characteristics of the area under test. The simulation results are found in good quantitative and qualitative agreement with the recorded Gutenberg–Richter (GR) scaling relations. The model is enriched with a powerful multi-parameter interface that enables the user to load real data from different regions. This paper examines the on-chip realisation of the model and its instrumentation. The CA model hardware implementation is based on Field Programmable Gate Array (FPGA) logic. It utilises an array of 32 × 32 cells. Parameters that construct the local CA rule constitute the input data. The initial seed, which to some extent corresponds to the seismic features of the area under test, is loaded in a semi-parallel way and the process is completed in a certain number of time steps. The automatic response of the processor provides the corresponding GR scaling law of the area under study. The hardware implementation of the CA-based earthquake simulation model is advantageous in terms of low-cost, high-speed, compactness and portability features. It can operate as a preliminary data-acquisition filter that accelerates the evaluation of recorded data as far as its origin time, spatial and magnitude completeness and quality are concerned. Software that performs reliable automatic phase picking, as well as data elaboration, can be assembled next to the earthquake recording instruments (the whole network) output to assure a quick and reliable iteration of the focal parameters of a recorded earthquake (epicentre coordinates, focal depth and magnitude). The dedicated processor can be accommodated right after this stage (before any manual elaboration) focusing on the near real-time development of a reliable qualitative dynamical seismic record and a mapping of the seismic characteristics of the area.     

Mesozoic rotation of Iberia: Subduction in the Pyrenees?

Following on paleomagnetic studies in the sixties showing ~ 35° counterclockwise rotation of Iberia during the Mesozoic, two classes of scenarios have been proposed for the motion history of Iberia which are currently competing. One class infers convergence in the Pyrenees in response to a scissor-type opening of the Bay of Biscay, described by a pole of rotation for Iberia with respect to Europe located within the Bay. The other class of scenarios assumes extensional or transtensional motions in the Pyrenees, compatible with opening of the Bay of Biscay described by a pole of rotation located in northern France. Although plate-kinematic studies over the last decade increasingly support the scissor-type model, geological studies in the Pyrenees have accumulated arguments in favour of an extensional or transtensional regime in the Pyrenean realm.We perform a detailed plate-kinematic analysis of the Late Jurassic and Cretaceous motion history of Iberia and surrounding plates with respect to Europe. A total of six sea-floor reconstructions in combination with paleomagnetic studies onland allow to recognize four distinct stages. (1) Early rifting and ultraslow spreading since the Kimmeridgean led to the development of an oceanic Neotethys domain north of Iberia. (2) This was followed by ~ 35° CCW rotation of Iberia during the Aptian, kinematically linked to progressive opening of the Bay of Biscay. (3) Motions in the Bay became stagnant during the Albian till Santonian, followed by the latest stages of spreading in the Bay, and (4) onset of largely Tertiary continental collision between Iberia and Europe eventually leading to the present day structure of the belt.Our analysis confirms the results of previous studies indicating that extensional or transtensional motions in the Pyrenean realm during opening of the Bay of Biscay and concurrent rotation of Iberia are incompatible with plate-kinematic reconstructions based on sea-floor anomalies. This invites a reappraisal of the geological data. Convergence in the Pyrenean realm during opening of the Bay and rotation of Iberia was accommodated by up to 300 km of subduction of mantle-dominated ocean floor exhumed during the late Jurassic and early Cretaceous. The stagnant stage in the progressive opening of the Bay indicates that convergence in the Pyrenean realm virtually came to a halt during the Albian. We hypothesize that the lithosphere previously subducted during Aptian convergence became gravitationally unstable, leading to asthenospheric upwelling and consequent magmatism and high temperature metamorphism in the overlying European margin now exposed in the North Pyrenean Zone. Aside from these magmatic and thermal effects, an enhanced gravitational potential energy of the remaining lithosphere column underlain by shallow asthenosphere may have led to a stress state allowing belt-parallel extensional deformation. Such a detachment scenario, inspired by plate-kinematic results, may provide an alternative to explain many of the geological data commonly quoted to infer a transtensional or extensional tectonic regime in the Pyrenees during the rotation of Iberia.     

Magnetic Characterization of Amphibolites from the Fomopéa Pluton (West Cameroon): Their Implication in the Pan-African Deformation of the Central African Fold Belt

The Fomopea granitic pluton is emplaced in gnessic and amphibolitic basement.These gneissic and amphibolitic basement rocks are represented in the pluton's body as sub-rounded,elongated or stretched xe...     

Preface: Proceedings of the 5th International Symposium on Lithographic Limestone and Plattenkalk

Magmatic rocks from the pre-Mesozoic basements of the Sambuco and Maggia nappes have been dated by U–Pb zircon ages with the LA-ICPMS technique. Several magmatic events have been identified in the Sambuco nappe. The mafic banded calc-alkaline suite of Scheggia is dated at 540 Ma, an age comparable to that of mafic rocks in the Austroalpine Silvretta nappe. The Sasso Nero peraluminous augengneiss has an age of 480–470 Ma, like many other “older orthogneisses” in Alpine basement units. It hosts a large proportion of inherited zircons, which were dated around 630 Ma, a Panafrican age indicating the Gondwanan affiliation of the Sambuco basement. The calc-alkaline Matorello pluton yielded ages around 300 Ma, similar to numerous Late Carboniferous intrusions in other basement units of the Lower Penninic (Monte Leone, Antigorio, Verampio) and Helvetic domains (Gotthard and other External Crystalline Massifs). Associated lamprophyric dykes are slightly younger (300–290 Ma), like similar dykes sampled in gneiss blocks included in the sedimentary cover of the underlying Antigorio nappe (290–285 Ma). The Cocco granodiorite and Rüscada leucogranite, both intruding the basement of the neighbouring Maggia nappe, yielded ages of ca. 300–310 Ma, identical within errors to the age of the Matorello pluton. They are significantly older than former age determinations. This age coincidence, coupled with remarkable petrologic similarities between the Cocco and Matorello granodiorites, strongly suggests paleogeographic proximity of the Sambuco and Maggia nappes in Late Carboniferous times. In recent publications these two nappes have been interpreted as belonging to distinct Mesozoic paleogeographic domains: “European” for Sambuco and “Briançonnais” for Maggia, separated by the “Valais” oceanic basin. In this case, the similarity of the Matorello and Cocco intrusions would demonstrate the absence of any significant transcurrent movement between these two continental domains. Alternatively, according to a more traditional view, Sambuco and Maggia might belong to a single large Alpine tectonic unit.     

Shear banding in geomaterials under extensional plane strain conditions: Physical and analytical model

The shear band (SB) spacing phenomenon in geomaterials is addressed in this paper under plane strain extensional conditions. On the basis of sand box observations, a method is proposed for the prediction of the spacing between shear bands based on the so-called “bookshelf” deformation mechanism. The proposed method is based on the assumption that the material is softening inside the shear bands whereas outside the SB it undergoes elastic unloading. The underlying assumption for the prediction of SB spacing is that the material reaches the lowest possible energy rate. An analytical expression for the determination of the shear band spacing is presented taking into account the plane strain extensional deformation of the specimen. The friction due to the normal off-plane shear acting on the boundaries is then taken into account.     

A note on the M w 6.3 earthquake in Iceland on 29 May 2008 at 15:45 UTC

This preliminary study aims to investigate a M _w 6.3 earthquake that occurred in South Iceland on Thursday 29 May 2008 at 15:45 UTC. The epicentre was in the Olfus District between the towns of Selfoss and Hveragerdi. This study examines the data recorded and the damage observed immediately after the event. Horizontal accelerations of up to 80%g were recorded in the epicentral region and there is visual evidence that the vertical acceleration exceeded 1 g. The PGA data is compared to a ground motion estimation model developed for the South Iceland earthquakes in June 2000. In general the basic properties of this event are found to be similar to the characteristics of the South Iceland earthquakes in June 2000. The duration of strong-motion is short and the intensity attenuates rapidly with increasing distance. The earthquake action resisted by buildings in the near fault area is inspected through evaluation of elastic as well as inelastic response spectra. The vast majority of structures seemed to withstand the strong-motion fairly competently and without significant visual damage due firstly to the low-rise, predominantly reinforced concrete or timber, style of buildings. Secondly, the short duration of strong-motion contributed to the endurance of structures.     

Electrical resistivity and 57Fe Mössbauer spectra of Fe-bearing calcic amphiboles

Electrical resistivity and ⁵⁷Fe Mössbauer spectra are reported for three calcic amphiboles with different Fe concentrations. AC measurements (20?Hz–1?MHz) were performed, applying impedance spectroscopy between 100 and 785?°C in an N₂ gas atmosphere. It was found that up to three semiconducting charge transport processes can be distinguished, which in part changed slightly when several runs were carried out to higher temperatures. The extrapolated DC resistivity is much smaller for an amphibole with high Fe content than for the two with lower Fe concentrations. The derived activation energies are between ～0.48 and ～1.06?eV. For temperatures ≤600?°C the results are compatible with a charge transport mechanism due to electron hopping between Fe²⁺ and Fe³⁺. Above 600?°C, dehydrogenation and/or beginning amphibole decomposition obviously alter the conduction mechanism. From Mössbauer spectra it was established that in all amphibole samples Fe²⁺ and Fe³⁺ are simultaneously present. Mössbauer parameters were derived by fitting the observed spectra to models taking the occupation of various M sites into account.