Biogeochemistry of nitrous oxide in groundwater in a forested ecosystem elucidated by nitrous oxide isotopomer measurements

The biological and physical controls on microbial processes that produce and consume N₂O in soils are highly complex. Isotopomer ratios of N₂O, with abundance of ¹⁴N¹⁵N¹⁶O, ¹⁵N¹⁴N¹⁶O, and ¹⁴N¹⁴N¹⁸O relative to ¹⁴N¹⁴N¹⁶O, are promising for elucidation of N₂O biogeochemistry in an intact ecosystem. Site preference, the nitrogen isotope ratio of the central nitrogen atom minus that of the terminal nitrogen atom, is useful to distinguish between N₂O via hydroxylamine oxidation and N₂O via nitrite reduction.We applied this isotopomer analysis to a groundwater system in a temperate coniferous-forested ecosystem. Results of a previous study at this location showed that the N₂O concentration in groundwater varied greatly according to groundwater chemistry, i.e. NO₃⁻, DOC, and DO, although apportionment of N₂O production to nitrification or denitrification was ambiguous. Our isotopic analysis (δ¹⁵N and δ¹⁸O) of NO₃⁻ and N₂O implies that denitrification is the dominant production process of N₂O, but definitive information is not derived from δ¹⁵N and δ¹⁸O analysis because of large variations in isotopic fractionations during production and consumption of N₂O. However, the N₂O site preference and the difference in δ¹⁵N between NO₃⁻ and N₂O indicate that nitrification contributes to total N₂O production and that most measured N₂O has been subjected to further N₂O reduction to N₂. The implications of N₂O biogeochemistry derived from isotope and isotopomer data differ entirely from those derived from conventional concentration data of DO, NO₃⁻, and N₂O. That difference underscores the need to reconsider our understanding of the N cycle in the oxic-anoxic interface.     

Effects of riverbed incision on the hydrology of the Vietnamese Mekong Delta

The hydrogeomorphology of the Vietnamese Mekong Delta (VMD) has been significantly altered by natural and anthropogenic drivers. In this study, the spatiotemporal changes of the flow regime were examined by analysing the long-term daily, monthly, annual and extreme discharges and water levels from 1980 to 2018, supported by further investigation of the long-term annual sediment load (from the 1960s to 2015), river bathymetric data (in 1998, 2014 and 2017) and daily salinity concentration (from the 1990s to 2015) using various statistical methods and a coupled numerical model. Then, the effects of riverbed incision on the hydrology were investigated. The results show that the dry season discharge (i.e., in March–June) of the Tien River increased by up to 23% from the predam period (1980–1992) to the postdam period (1993–2018) but that the dry season water level at My Thuan decreased by up to −46%. The annual mean and monthly water levels in June at Tan Chau and in January and June–October at My Thuan in the Tien River decreased statistically, even though the respective discharges increased significantly. These decreased water levels instead of the increased discharges were attributed to the accelerated riverbed incision upstream from My Thuan, which increased by more than three times, from a mean rate of −0.16 m/year (−16.7 Mm³/year) in 1998–2014 to −0.5 m/year (−52.5 Mm³/year) in 2014–2017. This accelerated riverbed incision was likely caused by the reduction in the sediment load of the VMD (from 166.7 Mt/year in the predam period to 57.6 Mt/year in the postdam period) and increase in sand mining (from 3.9 Mm³ in 2012 to 13.43 Mm³ in 2018). Collectively, the decreased dry season water level in the Tien River is likely one of the main causes of the enhanced salinity intrusion.     

Dune-forming winds on Titan and the influence of topography

Numerous extended dunes on Saturn's moon Titan detected by the Cassini RADAR constrain the long-term pattern of surface winds. We analyse the statistics of surface wind speed and direction and their spatial and temporal variability predicted by a general circulation model (GCM) in order to constrain surface wind predictions of this GCM by dune observations. The model shows that modern winds are sufficient for saltation and dune formation at low latitudes, in agreement with the presence of dunes there. The best condition for the dune-forming wind occurs with a threshold friction speed of 0.02 m s⁻¹ or slightly less. The equatorial region is conducive to longitudinal dunes because of a combined effect of a high sand drift potential and obtuse bimodal wind pattern oblique to the equator caused by the seasonal reversal of the Hadley circulation. The cross-equatorial wind is steady, and is characterised by a high Weibull shape parameter (k∼4). The wind pattern at higher latitudes is more complex and gusty, and neither longitudinal nor transversal dunes would be able to form. Putative large-scale topography is found to have a profound influence on the near-surface wind pattern. Generally mountains cause a convergence and speeding up on the flank, while basins weaken the wind and cause a divergent flow. Longitudinal dunes can be deflected on the foot of mountains by up to 90°. If Xanadu is a hypothetical large mountain, a wind pattern converging in Xanadu that entirely disagrees with the dune observations is predicted. If instead Xanadu is a large basin, the wind arcs clockwise north of Xanadu and anti-clockwise west and southwest of Xanadu, in agreement with the dune orientations in the vicinity of Xanadu. The albedo pattern has comparatively little influence on the wind field. Isolated mountain chains cause only local-scale change in the wind pattern. However, the persistent surface easterlies in Belet, which are in conflict with the dune orientations, do not disappear by any combination of large-scale topography.     

Two strong radio bursts at high and medium Galactic latitude

The Nasu Observatory, which is composed of eight 20 m elements, was constructed for observing radio transients over a wide field at 1400 MHz. We report on two radio transients detected in consecutive drift scanning observations at declination 32° over a period of about two months. One of the two transients, WJN J1039+3200, appeared at =10^h39^m40^s±10^s, δ=32°±0.4° on March 4, 2005, and the other one, WJN J0645+3200, appeared at =06^h45^m25^s±10^s, δ=32°±0.4° on March 24, 2005. Both exhibited flux densities in excess of 1 Jy, and the burst durations were up to two days. Since there are few examples of radio transients outside the Galactic plane, these are very important observations. We have previously reported on four radio transients with features that look like the two transients detected this time. Of these six WJN transients in total, five had a duration of up to two days, and one up to three days. Four of the transients were detected at high Galactic latitude of b > 30°. Counterparts of the six WJN transients included X-ray sources in four events and had a consistency of 66%. The consistency of γ-ray, PGC Galaxy, NVSS, and FIRST sources was concentrated at about 50%. We were not able to find any special features in the counterparts. The distribution was verified by making a log N–log S plot using data for the four previously detected transients and the new ones. As a result, the distribution of the radio transients that we observed might have an isotropic distribution not dependent on Galactic longitude and Galactic latitude. The detection probability was calculated based on the assumption of an isotropic distribution. The 2σ upper probability limit for detection of transients of 1000 mJy or more is 0.0049 [deg⁻² yr⁻¹]. We cannot yet identify these two radio transients, because their features are different from any radio bursts observed in the past.     

Mineralogy,Fluid Inclusions,and Sulfur Isotopes of the Huanzala Deposits,Peru: Early Skarn and Late Polymetallic Replacement Style Mineralizations

Carbonate‐replacement polymetallic mineralization at the Huanzala deposits (9°51′S, 77°00′W) was conducted in two contrasting stages that occurred in almost the same location. Early‐stage mineralization has a relation with a granodiorite porphyry stock, whereas the late‐stage mineralization is genetically associated with quartz porphyry sills. The early stage involved low to intermediate sulfidation Cu–Zn–(Pb) mineralization associated with metasomatic skarn, and the late stage involved high to intermediate sulfidation Cu–Zn–Pb–(Mn) mineralization associated with hydrothermal alteration characterized by paragonitic sericitization. The orebodies are hosted by steeply dipping (approximately 60°NE) Lower Cretaceous carbonate rocks in a relatively narrow range of approximately 4 km in horizontal extent and less than 1 km in depth. The pathway of the early‐stage brine‐derived fluids (300–>400°C, >33 wt% NaCl equivalent) along a plot of log against 1000/T is best explained by the progressive dual decline of the value and the temperature under rock‐buffering conditions; this decline saw the pathway progress through the stability field of pyrrhotite to reach that of pyrite and promoted a decrease in FeS from 14.5 to 1.6 mol% in the sphalerite. In contrast, an explanation for the pathway of the late‐stage fluids (140–290°C, 3–13 wt% NaCl equivalent) is given by an almost isothermal decline at approximately 270°C, with passing through the stability field of pyrite–bornite to reach that of chalcopyrite, promoting an increase in FeS from 0.1 to 1.6 mol% in the sphalerite, suggesting gas‐buffering conditions. The ore formation pressure records in the fluid inclusions illustrate an approximately 2‐km erosion during the roughly 2‐Myr total lifetime of the hydrothermal system.     

Sound velocity and density of liquid Ni68S32 under pressure using ultrasonic and X-ray absorption with tomography methods

A new experimental setup for simultaneous P-wave velocity (V_P) and density (ρ) measurements for liquid alloys is developed using ultrasonic and X-ray absorption methods combined with X-ray tomography at high pressures and high temperatures. The new setup allows us to directly determine adiabatic bulk moduli (K_S) and to discuss the correlation between the V_P and ρ of the liquid sample. We measured V_P and ρ of liquid Ni₆₈S₃₂ up to 5.6 GPa and 1045 K using this technique. The effect of pressure on the V_P and ρ values of liquid Ni₆₈S₃₂ is similar to that of liquid Fe₅₇S₄₃. (Both compositions correspond to near-eutectic ones.) The obtained K_S values are well fitted to the finite strain equation with a $K_{{\text{S}}_0}$ value (K_S at ambient pressure) of 31.1 GPa and a dK_S/dP value of 8.44. The measured V_P was found to increase linearly with increasing ρ, as approximated by the relationship: V_P [m/s] = 1.29 ρ [kg/m³] – 5726, suggesting that liquid Ni–S follows an empirical linear relationship, Birch's law. The dV_P/dρ slope is similar between Ni₆₈S₃₂ and Fe₅₇S₄₃ liquids, while the V_P–ρ plot of liquid Ni–S is markedly different from that of liquid Fe–S, which indicates that the effect of Ni on Birch's law is important for understanding the V_P–ρ relation of planetary and Moon's molten cores.     

Development of partial factor design method on bending strength of piles for Japanese Specifications for Highway Bridges

ABSTRACT

This paper describes the development of a partial factor design method on the bending strength of piles for the Japanese Specifications for Highway Bridges. First, uncertainties in mobilised bending moments and yield bending moments were evaluated by Monte Carlo simulations. Second, the reliability of piles designed by the previous specifications were evaluated on the basis of reliability analysis considering uncertainties in the mobilised bending moments, yield bending moments, and other factors. Finally, a partial factor design method utilising a survey subsurface investigation method and ground type was developed to reach target reliability levels determined by the Standards.     

Bayesian and Neural Network Approaches to Estimate Deep Temperature Distribution for Assessing a Supercritical Geothermal System: Evaluation Using a Numerical Model

The temperature distribution at depth is a key variable when assessing the potential of a supercritical geothermal resource as well as a conventional geothermal resource. Data-driven estimation by a machine-learning approach is a promising way to estimate temperature distributions at depth in geothermal fields. In this study, we developed two methodologies—one based on Bayesian estimation and the other on neural networks—to estimate temperature distributions in geothermal fields. These methodologies can be used to supplement existing temperature logs, by estimating temperature distributions in unexplored regions of the subsurface, based on electrical resistivity data, observed geological/mineralogical boundaries, and microseismic observations. We evaluated the accuracy and characteristics of these methodologies using a numerical model of the Kakkonda geothermal field, Japan, where a temperature above 500 °C was observed below a depth of about 3.7 km. When using geological and geophysical knowledge as prior information for the machine learning methods, the results demonstrate that the approaches can provide subsurface temperature estimates that are consistent with the temperature distribution given by the numerical model. Using a numerical model as a benchmark helps to understand the characteristics of the machine learning approaches and may help to identify ways of improving these methods.

     

Seasonal variation of volatile organic iodine compounds in the water column of Funka Bay,Hokkaido, Japan

Volatile organic iodine compounds (VOIs) emitted from the ocean surface to the air play an important role in atmospheric chemistry. Shipboard observations were conducted in Funka Bay, Hokkaido, Japan, bimonthly or monthly from March 2012 to December 2014, to elucidate the seasonal variations of VOI concentrations in seawater and their sea-to-air iodine fluxes. The bay water exchanges with the open ocean water of the North Pacific twice a year (early spring and autumn). Vertical profiles of CH₂I₂, CH₂ClI, CH₃I, and C₂H₅I concentrations in the bay water were measured bimonthly or monthly within an identified water mass. The VOI concentrations began to increase after early April at the end of the diatom spring bloom, and represented substantial peaks in June or July. The temporal variation of the C₂H₅I profile, which showed a distinct peak in the bottom layer from April to July, was similar to the PO₄ ^3? variation profile. Correlation between C₂H₅I and PO₄ ^3? concentrations (r = 0.93) suggests that C₂H₅I production was associated with degradation of organic matter deposited on the bottom after the spring bloom. CH₂I₂ and CH₂ClI concentrations increased substantially in the surface and subsurface layers (0–60 m) in June or July resulted in a clear seasonal variation of the sea-to-air iodine flux of the VOIs (high in summer or autumn and low in spring).     

Short term variability of Particle fluxes and its relation to variability in sea surface temperature and chlorophylla field detected by Ocean Color and Temperature Scanner (OCTS) off Sanriku, northwestern North Pacific in the spring of 1997

A sediment trap experiment was carried out in conjunction with an over flight of Ocean Color Temperature Scanner (OCTS) on board Advanced Earth Observing Satellite (ADEOS) at 40°N, 143°E off Sanriku in April to May 1997. Short term variability of particle fluxes was examined at depths of 450 m and 600 m from April 6 to May 1 with a sampling interval of two days, and at 450 m with one day interval from 2nd to 10th May. Daily averaged mass flux at 450 m and 600 m was 815 mg m⁻²d⁻¹ and 862 mg m⁻²d⁻¹, respectively. A sharp increase in mass flux was observed during the period from April 26 to April 29 with the highest mass flux of 8 g m⁻²d⁻¹. About 85% of the total mass flux for the entire duration (26 days) was collected within these 4 days. Trapped material during the peak flux period was mainly composed of diatoms dominated byThalassiosira spp. and resting spores ofChaetoceros spp. This suggested that the peak flux was the result of (a) diatom bloom(s) in the euphotic column. Current meter records at 420 m showed that on April 26 and 27, the period when the peak flux was observed, the southwestward current had diminished in strength and changed its direction northwestward. Low current speeds appeared to have enhanced trap efficiency to help form the peak flux. A time series of OCTS Intensive-LAC (Local Area Coverage: Region B) images from mid-March to early May was examined todetect phytoplankton bloom(s). In the March 26th Chl image, high concentration region was restricted to the southwest off Cape Erimo, but spread around the warm core ring (WCR) 93A by April 10. East of the WCR93A, high Chl concentration remained steady until May, but to the west of the WCR93A, Chl decreased rapidly before the 19th of April. From this observation we suspect that the peak flux observed at the end of April originated from a bloom, which ceased on the 17th or 18th of April, in the region north of 40°N and west of 143°E. Taking the current meter records into account, the source region for the trapped material is most likely around southwest of the Cape Erimo.