Clockwise phase propagation of semi-diurnal tides in the Gulf of Thailand

The phase of semi-diurnal tides (M₂ and S₂) propagates clockwise in the central part of the Gulf of Thailand, although that of the diurnal tides (K₁, O₁ and P₁) is counterclock-wise. The mechanism of clockwise phase propagation of semi-diurnal tides at the Gulf of Thailand in the northern hemisphere is examined using a simple numerical model. The natural oscillation period of the whole Gulf of Thailand is near the semi-diurnal period and the direction of its phase propagation is clockwise, mainly due to the propagation direction of the large amplitude part of the incoming semi-diurnal tidal wave from the South China Sea. A simplified basin model with bottom slope and Coriolis force well reproduces the co-tidal and co-range charts of M₂ tide in the Gulf of Thailand.     

Tidal Correction of Altimetric Data in the Japan Sea

Satellite altimetric data have been very useful in the study of variation in the eddy field of the ocean. In order to investigate the variation in the eddy field, we have to remove tidal signals from altimetric data. However, global tidal models do not have sufficient accuracy in marginal seas such as the Japan Sea. In this study, we carried out harmonic analysis of temporal fluctuations of sea surface height data in the Japan Sea measured by TOPEX/POSEIDON. We could eliminate the tidal signals from altimetric data of TOPEX/POSEIDON and also from ERS-2 altimetric data with use of the harmonic constants derived from TOPEX/POSEIDON and tide gauge data along the coast. We draw co-tidal and co-range charts in the Japan Sea using the result of the harmonic analysis of TOPEX/POSEIDON altimetric data and tide gauge data along the coast. The results obtained turn out to be very useful for the tidal correction of altimetric data from satellite in the Japan Sea.     

The 10 ka multiple vent pyroclastic eruption sequence at Tongariro Volcanic Centre, Taupo Volcanic Zone, New Zealand: Part 2. Petrological insights into magma storage and transport during regional extension

The six eruption episodes of the 10 ka Pahoka–Mangamate (PM) sequence (see companion paper) occurred over a ?200–400-year period from a 15-km-long zone of multiple vents within the Tongariro Volcanic Centre (TgVC), located at the southern end of the Taupo Volcanic Zone (TVZ). Most TgVC eruptives are plagioclase-dominant pyroxene andesites and dacites, with strongly porphyritic textures indicating their derivation from magmas that ascended slowly and stagnated at shallow depths. In contrast, the PM pyroclastic eruptives show petrographic features (presence of phenocrystic and groundmass hornblende, and the coexistence of olivine and augite without plagioclase during crystallisation of phenocrysts and microphenocrysts) which suggest that their crystallisation occurred at depth. Depths exceeding 8 km are indicated for the dacitic magmas, and >20 km for the andesitic and basaltic andesitic magmas. Other petrographic features (aphyric nature, lack of reaction rims around hornblende, and the common occurrence of skeletal microphenocrystic to groundmass olivine in the andesites and basaltic andesites) suggest the PM magmas ascended rapidly immediately prior to their eruption, without any significant stagnation at shallow depths in the crust. The PM eruptives show three distinct linear trends in many oxide–oxide diagrams, suggesting geochemical division of the six episodes into three chronologically-sequential groups, early, middle and late. Disequilibrium features on a variety of scales (banded pumice, heterogeneous glassy matrix and presence of reversely zoned phenocrysts) suggest that each group contains the mixing products of two end-member magmas. Both of these end-member magmas are clearly different in each of the three groups, showing that the PM magma system was completely renewed at least three times during the eruption sequence. Minor compositional diversity within the eruptives of each group also allows the PM magmas to be distinguished in terms of their source vents. Because petrography suggests that the PM magmas did not stagnate at shallow levels during their ascent, the minor diversity in magmas from different vents indicates that magmas ascended from depth through separate conduits/dikes to erupt at different vents either simultaneously or sequentially. These unique modes of magma transport and eruption support the inferred simultaneous or sequential tapping of small separate magma bodies by regional rifting in the southern Taupo Volcanic Zone during the PM eruption sequence (see companion paper).     

The mass of the star formed in a cloud core

The forming star grows by mass inflow from the parent cloud core, mainly through the accretion disk. However, the core matter which has not yet contracted much is seriously disturbed by the activities of the forming star. We consider mass outflow and emission of ultraviolet radiation as such activities and determine the stellar mass as a function of the physical quantities of the parent cloud core.     

A Study on Residual Flow in the Gulf of Tongking

On the basis of observations of water temperature, salinity and wind during winter (December to following February) and summer (June to August) in the Gulf of Tongking, a robust diagnostic three-dimensional model has established that reveals the seasonal variation in residual flow, including wind-driven current, density-driven current and tide-induced residual current. It is shown that in the Gulf of Tongking the wind-driven current plays the most important role in the seasonal variation of residual flow field. Due to strong NE monsoon (9 m/s) during winter the residual flow (reaches 30 cm/s) is stronger than that in summer. At the surface the residual flow direction during winter is basically westward or southwestward, while during summer it is almost reversed.     

Characteristics of crustal structures in the Yamato Basin,sea of Japan,deduced from seismic explorations

Crustal structures around the Yamato Basin in the southeastern Sea of Japan, inferred from recent ocean bottom seismography (OBS) and active-source seismological studies, are reviewed to elucidate various stages of crustal modification involved from rifting in the crust of the surrounding continental arc to the production of oceanic crust in the Yamato Basin of the back-arc basin. The northern, central, and southern areas of the Yamato Basin have crustal thicknesses of approximately 12–16 km, and lowermost crusts with P-wave velocities greater than 7.2 km/s. Very few units have P-wave velocities in the range 5.4–6.0 km/s, which corresponds to the continental upper crust. These findings, combined with previous geochemical analysis of basalt samples, are interpreted to indicate that a thick oceanic crust has been formed in these areas of the basin, and that this oceanic crust has been underplated by mantle-derived magma. In the central Yamato Basin, the original continental crust has been fully breached and oceanic crust has been formed. Conversely, the presence of a unit corresponding to the continental upper crust and the absence of a high-velocity part in the lower crust implies that the southwestern edge of the Yamato Basin has a rifted crust without significant intrusion. The Oki Trough has a crust that is 17–19 km thick with a high-velocity lower crust and a unit corresponding to the continental upper crust. The formation of the Oki Trough resulted from rifting with magmatic intrusion and/or underplating. We interpret these variations in the crustal characteristics of the Yamato Basin area as reflecting various instances of crustal modification by thinning and magmatic intrusion due to back-arc extension, resulting in the production of a thick oceanic crust in the basin.     

A Challenge of Water Purification in Dokai Bay, Japan

A history of water pollution and countermeasures for water purification in Dokai Bay, Japan are reviewed. Now, Dokai Bay suffers from the occurrences of red tides and oxygen-deficiency in summer. In order to prevent the occurrences of red tides and oxygen-deficiency, an ecological numerical model has been developed. The model experiments forecast that when the phosphorus or nitrogen load from land will be cut by 90% or 95%, respectively, red tides and oxygen-deficiency will not occur in Dokai Bay. If the industrial and sewage facilities are not sufficient to cut the nutrients load to the necessary degree, we have to consider other countermeasures such as cultivating bivalves and algae in order to decrease the nutrients concentration in the bay. International co-operation related to coastal zone management is also discussed.     

Solidification depth and crystallization age of the Shiaidani Granodiorite: Constraints to the average denudation rate of the Hida Range,central Japan

Solidification pressure and crystallization age of the ~5 Ma Shiaidani Granodiorite (Hida Mountain Range, central Japan) are determined based on Al-in-hornblende geobarometry and U–Pb zircon dating. Al-poor patchy replacements developed in amphiboles are common in this granite and petrographic study revealed that the replacements include chloritized biotite and albitic plagioclase. These are probably the hydrothermally recrystallized domains, and should not be used for solidification pressure estimates. Magmatic rim of amphibole is characterized by Si < 7.3 a.p.f.u. (Al_IV > 0.7 a.p.f.u.), and utilized in solidification pressure estimate that yielded 0.17–0.29 GPa. The solidification age of the granite is estimated as ~5.6–5.2 Ma using U–Pb zircon dating. From these data, the lower limit of an average denudation rate after ~5.6–5.2 Ma for the area where Shiaidani Granodiorite is exposed is estimated as 0.93–2.5 mm/year.     

Phase transformations in the earth's mantle and subducting slabs: Implications for their compositions, seismic velocity and density structures and dynamics

Abstract Phase transformations in model mantle compositions and those in subducting slabs have been reviewed to a depth of 800 km on the basis of recent high-pressure experimental data. Seismic velocity and density profiles in these compositions have also been calculated using these and other mineral physics data. The nature of the seismic velocity and density profiles calculated for a pyrolite composition was found to generally agree with those determined by seismic observations (e.g. PREM). The locations of the seismic discontinuities at 400 and 670 km correspond almost exactly to the depths where the transformations of the olivine component to denser phases take place. Moreover, the steep gradients in the seismic velocity/density profiles observed between these depths are qualitatively consistent with those expected from the successive transformations in the complementary pyroxene-garnet component in the pyrolite composition. Further, the calculated seismic velocity and density values agree well with those observed in the upper mantle and mantle transition region within the uncertainties attached to these calculations and observations. Pyrolite or peridotite compositions are thus most likely to represent the composition of the mantle above 670 km depth, although some degrees of chemical heterogeneity may exist in the transition region. The observed sharp discontinuous increases of seismic velocities and density at this depth may be attributed either to the phase transformation to a perovskite-bearing assemblage in pyrolite or to chemical composition changes. Density profiles in subducted slabs have been calculated along adequate geotherms assuming that the slabs are composed of the former oceanic crust underlain by a thicker harzburgitic layer. It is shown that the former oceanic crust is substantially less dense than the surrounding pyrolite mantle at depths below 670 km, while it is denser than pyrolite in the upper mantle and the transition region. The subducted former oceanic crust may be trapped in this region, forming a geochemically enriched layer at the upper mantle-lower mantle boundary. Thick and cool slabs may penetrate into the lower mantle, but the chemically derived buoyancy may result in strong deformation and formation of megalith structures around the 670 km seismic discontinuity. These structures are consistent with those detected by recent seismic tomography studies for subduction zones.