Turbulent dispersion of gaseous pollutants: Numerical study of ground level concentration as a function of Eddy diffusivity parametrization on the atmospheric boundary layer

Theoretical and Applied Climatology - A numerical model of the dispersion of gaseous atmospheric pollutants based on the K-theory has been proposed, and the numerical procedure has been validated...     

Late Pleistocene (Last Interglacial) terrace deposits, Bahia Coyote, Baja California Sur, México

Late Pleistocene age terrace deposits are exposed in the narrow cliffed coastal plain of Bahia Coyote, Baja California Sur, resting unconformably on the lagoonal-shallow water volcaniclastics of the early Miocene Cerro Colorado Member of the El Cien Formation. The terrace is dissected by widely spaced arroyos and partically covered by alluvial fans in the inner and central areas. The marine deposits vary in thickness from 0.5 to 10 m and were laid down in pre-existing erosional channels and depressions in the Pleistocene landscape. The sequence begins with a cobble conglomerate with oyster shells, overlain by poorly bedded molluscan-rich bioclastic sands and coral rubble, beds of massive Porites in growth position and coral-rhodolith sands and marls. Beach sands and gravels and coastal dunes cap the sequence.Samples of Porites panamensis selected for U/Th dating are well-preserved aragonite (>95%). Preliminary results yield U/Th ages of 109–209 ka but the corals have initial δ ²³⁴U values in excess of modern seawater values. This indicates open-system behavior and uncertainty associated with the ages. A corrected age for the top of the massive Porites unit suggests that the corals grew during the last interglacial, marine isotope stage (MIS) 5e sea level high stand.Assuming global sea level during MIS 5e was ca. 4–5 m above present-day sea level (McCulloch and Esat, 2000) and the growth position of the corals was 1–5 m below sea level, the terraces have been uplifted between 12 and 25 m (12–15 cm/kyr). This is consistent with other terrace-based uplift rates for the central Baja California peninsula, north of the La Paz fault.     

Volcanic geomorphology and tectonics of the Aeolian archipelago (Southern Italy) based on integrated DEM data

The geomorphological and morphometric analysis of the sea floor topography surrounding the Aeolian Islands, South Tyrrhenian Sea, Italy, provides insights into the relationships between the volcanological evolution of the islands and their tectonic features. We constructed geomorphological maps of the submarine portions of the seven large edifices constituting the islands on the basis of a DEM with a 5 m resolution step. These maps include constructional and destructional landforms such as submarine volcanic vents located west of Lipari and north of Alicudi, and hummocky surfaces recognised north of Lipari and Salina. The latter landforms, together with the occurrence of large scars affecting the main edifices on land, suggest that sector collapses affected some islands. Geomorphological data indicate that the location of subaerial and submarine vents is strongly controlled by local tectonic structures striking WNW-ESE (Alicudi-Filicudi sector), NNW-SSE (Salina-Lipari-Vulcano sector) and NE-SW (Panarea-Stromboli sector). The islands can be divided into two groups on the basis of some morphometric parameters: a first group with a pancake-like shape, Dp/D (abrasion platform diameter/basal diameter) higher than 0.40 and H/D (total height/basal diameter) lower than 0.13, and a second group with a conical shape, characterised by Dp/D lower than 0.34 and H/D higher than 0.14. These ratios and other morphometric parameters reflect the different volcanological and structural evolution of the Aeolian Islands. The pancake-like shaped complexes have been created, in addition to their submarine stage, by extrusive and highly explosive activity, whereas the cone-shaped edifices have been characterised by effusive or moderate explosive activity.Editorial responsibility: C Kilburn     

The Muralla Pircada—an ancient Andean debris flow retention dam, Santa Rita B archaeological site, Chao Valley, Northern Perú

Debris flows caused by El Niño events, earthquakes, and glacial releases have affected northern Perú for centuries. The Muralla Pircada, a northeast-trending, 2.5 km long stone wall east of the Santa Rita B archaeological site (Moche-Chimú) in the Chao Valley, is field evidence that ancient Andeans recognized and, more importantly, attempted to mitigate the effects of debris flows. The Muralla is upstream from the site and is perpendicular to local drainages. It is 1–2 m high, up to 5 m wide, and is comprised of intentionally-placed, well-sorted, well-rounded, 20–30 cm cobbles and boulders from nearby streams. Long axes of the stones are gently inclined and parallel local drainage. Case-and-fill construction was used with smaller cobbles and pebbles used as fill. Pre-Muralla debris flows are indicated by meter-sized, angular boulders that were incorporated in-place into construction of the dam and are now exposed in breeches in the dam. Post-Muralla debris flows in the Chao Valley are indicated by meter-sized, angular boulders that now abut the retention dam.     

New data (U–Pb, K–Ar) on the geochronology of the alkaline-carbonatitic association of Fuerteventura, Canary Islands, Spain

Zircons from a nepheline-syenite of the Fuerteventura Basal Complex were dated by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). The age obtained from a total of 21 U–Th–Pb analyses is 25.4 ± 0.3 Ma (2σ) indicating a late Oligocene–early Miocene crystallization. This age is consistent with new K–Ar ages on nepheline-syenites and pyroxenites, and contradicts previously published ³⁹Ar–⁴⁰Ar (feldspar) ages that were interpreted to represent a late Cretaceous–early Paleocene, pyroxenitic–syenitic magmatic episode. These new geochronological data are consistent with both field observations and most of the previously published ages on alkaline silicate rocks and associated carbonatites of Fuerteventura. Therefore, they strongly support the existence of a single, late Oligocene–early Miocene event of alkaline–carbonatitic magmatism in the Basal Complex of Fuerteventura, taking place at approximately 25 Ma and comprising: alkaline-pyroxenites, melteigites-ijolites, nepheline-syenites and carbonatites, as well as their volcanic equivalents and associated dykes.

These new data provide an estimate for the length of time that it took the island to grow, thus eliminating one of the major problems in explaining its development by a hot-spot model.     

Geostatistical seismic Amplitude‐versus‐angle inversion

Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models.     

Bioturbation and erosion rates along the soil-hillslope conveyor belt,part 1: Insights from single-grain feldspar luminescence

The interplay of bioturbation, soil production and long-term erosion–deposition in soil and landscape co-evolution is poorly understood. Single-grain post-infrared infrared stimulated luminescence (post-IR IRSL) measurements on sand-sized grains of feldspar from the soil matrix can provide direct information on all three processes. To explore the potential of this novel method, we propose a conceptual model of how post-IR IRSL-derived burial age and fraction of surface-visiting grains change with soil depth and along a hillslope catena. We then tested this conceptual model by comparison with post-IR IRSL results for 15 samples taken at different depths within four soil profiles along a hillslope catena in the Santa Clotilde Critical Zone Observatory (southern Spain). In our work, we observed clear differences in apparent post-IR IRSL burial age distributions with depth along the catena, with younger ages and more linear age–depth structure for the hill-base profile, indicating the influence of lateral deposition processes. We noted shallower soils and truncated burial age–depth functions for the two erosional mid-slope profiles, and an exponential decline of burial age with depth for the hill-top profile. We suggest that the downslope increase in the fraction of surface-visiting grains at intermediate depths (20 cm) indicates creep to be the dominant erosion process. Our study demonstrates that single-grain feldspar luminescence signature-depth profiles provide a new way of tracing vertical and lateral soil mixing and transport processes. In addition, we propose a new objective luminescence-based criterion for mapping the soil-bedrock boundary, thus producing soil depths in better agreement with geomorphological process considerations. Our work highlights the possibilities of feldspar single grain techniques to provide quantitative insights into soil production, bioturbation and erosion–deposition. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

The effect of salinity on Fucus ceranoides (Ochrophyta,Phaeophyceae) in the Mondego River (Portugal)

Algae(and their extracts) are increasingly important for pharmaceutical applications due to the diversity of useful compounds they contain. The genus Fucus contains one of the most studied species,Fucus vesiculosus. The species F. ceranoides differs from the others of the genus by presenting longitudinal air-vesicles and a capacity to survive at low salinities. It is an alga that inhabits the Mondego River estuary(Portugal), at the southern limit of its distribution, and can serve as a role model to understand the effect of a salt gradient on the production of bioactive compounds. We assessed the phenolic content and antioxidant activity of different F. ceranoides extracts(e.g. methanolic, aqueous and polysaccharide) prepared from samples harvested from two different zones to evaluate if the adaptation of F. ceranoides to different salinity levels influenced its chemical composition. The antioxidant activity of the extracts was determined using 1,2-diphenyl-picrylhydrazyl(DPPH) and 2.2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)(ABTS)radicals. These assays demonstrated that the methanolic extract of lyophilized F. ceranoides that grew at low salinities was the most bioactive, i.e. DPPH(IC_(50)=50.39 μg/mL) and ABTS(TEAC=2.42). The total phenolic content(Folin-Ciocalteu method) and the methanolic extract of the lyophilized F. ceranoides collected from a low salinity habitat exhibited the highest phenolic content(PGE=49.48 μg/mg of lyophilized extract)amongst those sampled. Thin layer chromatography(TLC) and Fourier transform infrared spectroscopy(FTIR) were used for the identification of compounds in the extracts. This characterization allowed confirmation that the various extracts contained almost the same compounds but with notable quantitative differences. Based on these results, we conclude that there were differences in the quantity of the compounds due to the effect of salinity. The drying methods used were also found to have influenced the quality of the extracted compounds.