Reappraisal of the GL‐O Reference Material for K‐Ar Dating: New Insight from Microanalysis,Single‐Grain and Milligram Ar Measurements

The homogeneity and Ar‐dating suitability of the GL‐O reference material were re‐evaluated to determine whether this material is sufficiently homogeneous to be suitable for the calibration of modern high sensitivity instruments. Based on new micro‐analyses and noble gas determinations, our contribution reveals several kinds of inhomogeneity at the grain scale: disparity in the glauconitisation among and within the pellets, variable occurrence of a phosphatic component within pellets (1% m/m on average), and rare occurrences of calcite and detrital grains. Measurements on test portions of ≤ 1 mg reflect such heterogeneity with variability in ⁴⁰Ar* content that exceeds analytical uncertainty, including a few highly anomalous values. The lesser evolved glauconite population yielded ⁴⁰Ar* contents ~ 15% lower than the value of 24.8 nl g^?1 recommended by Odin et al. (1982, Numerical dating in stratigraphy. Wiley (Chichester, UK), 123–148). But the measured concentrations of ⁴⁰Ar* converge towards the aforementioned value as test portion mass increased to > 3 mg. A few rare 3 mg experiments still yielded ⁴⁰Ar* contents lower than the recommended value (down to 24.0 nl g^?1), and we recommend using more conservative minimum masses of 5–10 mg. A further purification step for GL‐O or the intercalibration of its powder version could be considered to diminish the size of the test portions and the intensity of the measured signals.     

Fitting and Reconstruction of Thirteen Simple Coronal Mass Ejections

Coronal mass ejections (CMEs) are the main drivers of geomagnetic disturbances, but the effects of their interaction with Earth’s magnetic field depend on their magnetic configuration and orientation. Fitting and reconstruction techniques have been developed to determine important geometrical and physical CME properties, such as the orientation of the CME axis, the CME size, and its magnetic flux. In many instances, there is disagreement between different methods but also between fitting from in situ measurements and reconstruction based on remote imaging. This could be due to the geometrical or physical assumptions of the models, but also to the fact that the magnetic field inside CMEs is only measured at one point in space as the CME passes over a spacecraft. In this article we compare three methods that are based on different assumptions for measurements by the Wind spacecraft for 13 CMEs from 1997 to 2015. These CMEs are selected from the interplanetary coronal mass ejections catalog on https://wind.nasa.gov/ICMEindex.php because of their simplicity in terms of: 1) slow expansion speed throughout the CME and 2) weak asymmetry in the magnetic field profile. This makes these 13 events ideal candidates for comparing codes that do not include expansion or distortion. We find that for these simple events, the codes are in relatively good agreement in terms of the CME axis orientation for six of the 13 events. Using the Grad–Shafranov technique, we can determine the shape of the cross-section, which is assumed to be circular for the other two models, a force-free fitting and a circular–cylindrical non force-free fitting. Five of the events are found to have a clear circular cross-section, even when this is not a precondition of the reconstruction. We make an initial attempt at evaluating the adequacy of the different assumptions for these simple CMEs. The conclusion of this work strongly suggests that attempts at reconciling in situ and remote-sensing views of CMEs must take into consideration the compatibility of the different models with specific CME structures to better reproduce flux ropes.     

Analytical study of the powered Swing-By maneuver for elliptical systems and analysis of its efficiency

Analytical equations describing the velocity and energy variation of a spacecraft in a Powered Swing-By maneuver in an elliptic system are presented. The spacecraft motion is limited to the orbital plane of the primaries. In addition to gravity, the spacecraft suffers the effect of an impulsive maneuver applied when it passes by the periapsis of its orbit around the secondary body of the system. This impulsive maneuver is defined by its magnitude \(\delta V\) and the angle that defines the direction of the impulse with respect to the velocity of the spacecraft (\(\alpha\)). The maneuver occurs in a system of main bodies that are in elliptical orbits, where the velocity of the secondary body varies according to its position in the orbit following the rules of an elliptical orbit. The equations are dependent on this velocity. The study is done using the “patched-conics approximation”, which is a method of simplifying the calculations of the trajectory of a spacecraft traveling around more than one celestial body. Solutions for the velocity and energy variations as a function of the parameters that define the maneuver are presented. An analysis of the efficiency of the powered Swing-By maneuver is also made, comparing it with the pure gravity Swing-by maneuver with the addition of an impulse applied outside the sphere of influence of the secondary body. After a general study, the techniques developed here are applied to the systems Sun-Mercury and Sun-Mars, which are real and important systems with large eccentricity. This problem is highly nonlinear and the dynamics very complex, but very reach in applications.     

Analysis of occurrence patterns and biological factors of cetaceans based on long‐term and fine‐scale data from platforms of opportunity: Madeira Island as a case study

Management and conservation issues are addressed through the identification of areas of particular importance, which requires the acquisition of baseline information on species distribution and dynamics. These types of data are particularly difficult to obtain at high resolution for large marine vertebrates like cetaceans, given that dedicated surveys are complex and logistically expensive. This study uses daily presence–absence sighting data of cetaceans collected year‐round from whale‐watching boats to support the theory that fine‐scale data obtained from platforms of opportunity can provide valuable information on species occurrence and group dynamics. Data from 7,551 (daily) sightings comprising 22 species were collected from 3,527 surveyed days over 11 years (mean of 321 days per year, SD = 17) in the pelagic environment of Madeira Island. Cetaceans were observed on 92% of the surveyed days, and a mean of 15.4 (SD = 1.5), 8.2 (SD = 2.0) and 2.1 (SD = 1.2) species were recorded per year, month, and day, respectively. There were significant differences in the number of species per month (p < .001), with the highest diversity recorded in June. At least nine species, comprising 96% of all sightings, were found to use the Madeiran waters on a regular basis, such as the Atlantic spotted dolphin (Stenella frontalis), the short‐beaked common dolphin (Delphinus delphis), the bottlenose dolphin (Tursiops truncatus), and others featured in the Red List of the International Union for Conservation of Nature as Endangered, Vulnerable, and Data Deficient. In addition, 10 species were found to use the Madeiran waters for travelling, feeding, resting, socializing and calving, which suggests that the southern and southeastern waters of Madeira Island constitute an area of interest for cetaceans. This study characterizes the cetaceans’ community structure (occurrence, aggregation sizes, behaviours, proportion of calves, and inter‐specific relationships) of a poorly studied region, providing important information for managers. Finally, the advantages and limitations of using fine‐scale data from a type of platform of opportunity that is increasing along coastlines globally are discussed.     

New Zealand's small town transition: The experience of demographic and economic change and place based responses

A significant percentage of the smaller urban centres around the world are losing people which raises questions regarding the appropriate responses to this challenge. Responses from the state have generally been muted, and as a result, concepts of new localism and new regionalism are useful for understanding the role played by place‐based leadership and partnerships between local businesses, community groups and individuals. Key within this space is the role of endogenous responses anchored on local social capital and resilience. This paper overviews key themes in the literature before examining statistical evidence of small town growth, stabilisation or decline in New Zealand. This leads into an examination of how three small towns in the country are responding to demographic and economic change. The cases illustrate the importance of local‐led responses to the debilitating effects of change and the degree to which place based development can be critical in the context of coping with change in small towns. The paper further argues that “right‐sizing” to a new economic and demographic reality may be the appropriate focus of local attention.     

Assessment of coastal management options by means of multilayered ecosystem models

This paper presents a multilayered ecosystem modelling approach that combines the simulation of the biogeochemistry of a coastal ecosystem with the simulation of the main forcing functions, such as catchment loading and aquaculture activities. This approach was developed as a tool for sustainable management of coastal ecosystems. A key feature is to simulate management scenarios that account for changes in multiple uses and enable assessment of cumulative impacts of coastal activities. The model was applied to a coastal zone in China with large aquaculture production and multiple catchment uses, and where management efforts to improve water quality are under way. Development scenarios designed in conjunction with local managers and aquaculture producers include the reduction of fish cages and treatment of wastewater. Despite the reduction in nutrient loading simulated in three different scenarios, inorganic nutrient concentrations in the bay were predicted to exceed the thresholds for poor quality defined by Chinese seawater quality legislation. For all scenarios there is still a Moderate High to High nutrient loading from the catchment, so further reductions might be enacted, together with additional decreases in fish cage culture. The model predicts that overall, shellfish production decreases by 10%–28% using any of these development scenarios, principally because shellfish growth is being sustained by the substances to be reduced for improvement of water quality. The model outcomes indicate that this may be counteracted by zoning of shellfish aquaculture at the ecosystem level in order to optimize trade-offs between productivity and environmental effects. The present case study exemplifies the value of multilayered ecosystem modelling as a tool for Integrated Coastal Zone Management and for the adoption of ecosystem approaches for marine resource management. This modelling approach can be applied worldwide, and may be particularly useful for the application of coastal management regulation, for instance in the implementation of the European Marine Strategy Framework Directive.     

Population dynamics of the seagrass Cymodocea nodosa in Ria Formosa lagoon following inlet artificial relocation

The population dynamics of the seagrass Cymodocea nodosa was investigated in three meadows differently affected by the artificial relocation of an inlet in the western sector of the Ria Formosa lagoon, southern Portugal. One meadow was subjected to increasing currents that caused erosion, another one was subjected to an initial episode of burial and a third meadow was undisturbed by the inlet opening. The hydrodynamic/sedimentary condition of meadows was assessed through comparative sediment analysis between the meadow and the adjacent unvegetated area.     

Spatial and seasonal variations of the macrobenthic community and metal contamination in the Douro estuary (Portugal)

The macrobenthic community structure and characteristics of sediments were studied in samples collected seasonally at five stations in the lower mesotidal Douro estuary, Portugal. Sediment characterisation included grain size distribution, total-recoverable metals (Al, Fe, Mn, Zn, Cu, Cr, Pb, Ni and Cd), acid-volatile sulphides (AVS) and simultaneously extracted metals (SEM) and total organic matter contents. Spatial variation surpassed temporal variation both in terms of environmental parameters and community structure. Clear anthropogenic contamination in terms of Zn, Cr, Cu and Pb, and a positive SEM-AVS, indicating the potential bioavailability of these metals, were detected on the north bank of the estuary. Multivariate analysis revealed that in addition to natural sediment characteristics, the anthropogenic metal contamination was influencing the macrobenthic community structure. In fact, greater concentrations of Zn, Cr, Cu and Pb were associated with lower number of species and/or diversity. Finally, the dry weight-normalised metal concentrations appeared as a more useful tool than the SEM-AVS model in predicting disturbance of the macrobenthic community in the studied area.     

New Reference Materials,Analytical Procedures and Data Reduction Strategies for Sr Isotope Measurements in Geological Materials by LA-MC-ICP-MS

Laser ablation multi-collector mass spectrometry (LA-MC-ICP-MS) has emerged as the technique of choice for in situ measurements of Sr isotopes in geological minerals. However, the method poses analytical challenges and there is no widely adopted standardised approach to collecting these data or correcting the numerous potential isobaric inferences. Here, we outline practical analytical procedures and data reduction strategies to help establish a consistent framework for collecting and correcting Sr isotope measurements in geological materials by LA-MC-ICP-MS. We characterise a new set of plagioclase reference materials, which are available for distribution to the community, and present a new data reduction scheme for the Iolite software package to correct isobaric interferences for different materials and analytical conditions. Our tests show that a combination of Kr-baseline subtraction, Rb-peak-stripping using βRb derived from a bracketing glass reference material, and a CaCa or CaAr correction for plagioclase and CaCa or CaAr + REE²⁺ correction for rock glasses, yields the most accurate and precise ⁸⁷Sr/⁸⁶Sr measurements for these materials. Using the analytical and correction procedures outlined herein, spot analyses using a beam diameter of 100 μm or rastering with a 50–65 μm diameter beam can readily achieve < 100 ppm 2SE repeatability ("internal") precision for ⁸⁷Sr/⁸⁶Sr measurements for materials with < 1000 μg g^-1 Sr.