Pseudosection analysis for talc-Na pyroxene-bearing piemontite-quartz schist in the Sanbagawa Belt, Japan

Abstract Various modes of occurrence of talc were identified in piemontite‐quartz schists collected from schist and eclogite units in the Kotsu area of the Sanbagawa Belt, eastern Shikoku, Japan. They can be classified into the following types: (A) matrix and (B) pull‐apart talc. The matrix talc is associated with aegirineaugite or glaucophane in the eclogite unit and with albite or chlorite in the schist unit. The pull‐apart talc is developed at the pull‐apart of microboudin structures of Na‐amphibole, along with albite or chlorite in samples from both units, suggesting that the pull‐apart talc was formed by Na‐amphibole consuming reactions in both units. The talc–aegirineaugite–phengite association is found in a thin layer (a few millimetres thick), with higher Na₂O/(Na₂O + Al₂O₃ + MgO) ratio in the ANM (Al₂O₃–Na₂O–MgO) diagram projected from phengite, epidote and other minerals, in the eclogite unit. Crystals of aegirineaugite have decreased jadeite content [= 100 × Al/(Na + Ca)] and increased aegirine content [= 100 × (Na – Al)/(Na + Ca)] from the core (ca Jd₄₀Aeg₄₀Di₂₀) to the rim (ca Jd₂₃Aeg₅₃Di₂₄), and are replaced by winchite and albite in varying degrees at the crystal margins. Na‐amphibole is glaucophane/crossite, commonly rimmed by Al‐poor crossite or winchite at the margin in the eclogite unit, although it is relatively homogeneous crossite in the schist unit. These textures suggest that the talc‐phengite‐(aegirineaugite or glaucophane) assemblage equilibrated during an early stage of metamorphism and the pull‐apart talc was formed at a later stage in the eclogite unit. A plausible petrogenetic grid in the NCKFe³⁺MASH system with excess piemontite (regarded as epidote), hematite, quartz and water, pseudosection analysis for the aegirineaugite‐bearing layer and the observed mineral assemblages suggest that the talc‐aegirineaugite‐phengite assemblage is stable under high pressure conditions (ca 560–580°C and 18–20 kbar). The pull‐apart talc was formed at ca 565–580°C and 9.5–10.5 kbar by the reaction of glaucophane/crossite + paragonite = talc + albite during the decompression stage, suggesting that the piemontite‐quartz schist in the eclogite unit experienced high‐pressure metamorphism at ca 50–60 km depth and was then exhumed to ca 30 km depth under nearly adiabatic conditions.     

Diffuse reflection and transmission of radiation by finite atmospheres with specular reflectors

It is supposed that solar rays are incident uniformly on the top of a plane-parallel, anisotropically scattering, and homogeneous atmosphere, whose bottom is bounded by a specular reflector. An initial-value solution for the scattering and transmission functions is obtained, starting with an auxiliary equation. Some results of numerical experiments for given optical parameters are presented in Figures.     

A Theoretical Light-Curve Model for the 1999 Outburst of U Scorpii

We report the detection of the Pb i lambda4057.8 line in the very metal-poor (&sqbl0;Fe&solm0;H&sqbr0;=-2.7), carbon-rich star, LP 625-44. We determine the abundance of Pb (&sqbl0;Pb&solm0;Fe&sqbr0;=2.65) and 15 other neutron-capture elements. The abundance pattern between Ba and Pb agrees well with a scaled solar system s-process component, while the lighter elements (Sr-Zr) are less abundant than Ba. The enhancement of s-process elements is interpreted as a result of mass transfer in a binary system from a previous asymptotic giant branch (AGB) companion, an interpretation strongly supported by radial velocity variations of this system. The detection of Pb makes it possible, for the first time, to compare model predictions of s-process nucleosynthesis in AGB stars with observations of elements between Sr and Pb. The Pb abundance is significantly lower than the prediction of recent models (e.g., Gallino et al.), which succeeded in explaining the metallicity dependence of the abundance ratios of light s-elements (Sr-Zr) to heavy ones (Ba-Dy) found in previously observed s-process-enhanced stars. This suggests that one should either (1) reconsider the underlying assumptions concerning the (13)C-rich s-processing site ((13)C pocket) in the present models or (2) investigate alternative sites of s-process nucleosynthesis in very metal-poor AGB stars.     

An organic geochemical study of KP-2 core on the mud volcano at Nankai Trough

Organic geochemical data was collected from a KP-2 piston core sample obtained from a mud volcano in the Nankai Trough, off the southeast coast of Japan. The Nankai Trough was investigated geologically and was found to have a large amount of methane hydrates. Biomarkers indicating anaerobic oxidation of methane (AOM) were expected to be found in the sediment of the mud volcano collected by KP-2 core. But the gas chromatography-mass spectrometry (GC-MS) analysis of the samples showed only one biomarker related to the methane-oxidizing Archaea, namely 2,6,10,15,19-pentamethyleicosane (PME), could be detected throughout the KP-2 core. Phytane was predominant in the upper part of the KP-2 core; however, a series of 2,2-dimethylalkanes (2,2-DMAs) were characterized in the lower part of KP-2 core. The individual δ¹³C values of 2,2-DMAs, which were − 29.1 to − 27.3‰ indicate that the origin of 2,2-DMAs was not related to methane-oxidizing Archaea.     

Synoptic conditions and potential causes of the extreme heavy rainfall event of January 2009 over Mindanao Island,Philippines

Natural Hazards - This study investigates the synoptic conditions that led to the heavy rainfall/flood (HRF) event in Mindanao Island, Philippines (122??127°E;...     

Binary formation with different metallicities: dependence on initial conditions

The fragmentation process in collapsing clouds with various metallicities is studied using three-dimensional nested-grid hydrodynamics. Initial clouds are specified by three parameters: cloud metallicity, initial rotation energy and initial cloud shape. For different combinations of these parameters, we calculate 480 models in total and study cloud evolution, fragmentation conditions, orbital separation and binary frequency. For the cloud to fragment during collapse, the initial angular momentum must be higher than a threshold value, which decreases with decreasing metallicity. Although the exact fragmentation conditions depend also on the initial cloud shape, this dependence is only modest. Our results indicate a higher binary frequency in lower metallicity gas. In particular, with the same median rotation parameter as in the solar neighbourhood, a majority of stars are born as members of binary/multiple systems for  <10⁻⁴ Z_⊙  . With initial mass  <0.1 M_⊙  , if fragments are ejected in embryo from the host clouds by multibody interaction, they evolve to substellar-mass objects. This provides a formation channel for low-mass stars in zero- or low-metallicity environments.     

Modelling the relative dominance of wave erosion and weathering processes in shore platform development in micro‐ to mega‐tidal settings

In this paper we use a numerical model to explore the relative dominance of two main processes in shore platform development: wave erosion; weathering due to wetting and drying. The modelling approach differs from previous work in several aspects, including: the way that it accounts for weathering arising from gradual surficial intertidal rock degradation; subtidal profile shape development; and the consideration of a broad erosion parameter space in which, at either end of the erosion spectrum, shore platform profiles are produced by waves or weathering alone. Results show that in micro‐tidal settings, wave erosion dominates the evolution of (i) shore platforms that become largely subtidal and (ii) sub‐horizontal shore platforms that have a receding seaward edge. Weathering processes dominate the evolution of sub‐horizontal shore platforms with a stable seaward edge. In contrast, sloping shore platforms in mega‐tidal settings are produced across the full range of the process‐dominance spectrum depending on the how the erosional efficacy of wave erosion and weathering are parameterized. Morphological feedbacks control the process‐dominance. In small tidal environments wave processes are strongly controlled by the presence/absence of an abrupt seaward edge, but this influence is much smaller in large tidal environments due to larger water depths particularly at high tides. In large tidal environments, similar shore platform profile geometries can be produced by either wave‐dominant or weathering‐dominant process regimes. Equifinality in shore platform development has been noted in other studies, but mainly in the context of smaller‐scale (centimetre to metre) erosion features. Here we draw attention to geomorphic equifinality at the scale of the shore platform itself. Progress requires a greater understanding of the actual mechanics of the process regimes operating on shore platforms. However, this paper makes a substantial contribution to the debate by identifying the physical conditions that allow clear statements about process dominance. © 2018 John Wiley & Sons, Ltd.     

Could tsunami risk be underestimated using core‐based reconstructions? Lessons from ground penetrating radar

Where should we take cores for palaeotsunami research? It is generally considered that local depressions with low energy environments such as wetlands are one of the best places. However, it is also recognized that the presence or absence of palaeotsunami deposits (and their relative thickness) is highly dependent upon subsoil microtopography. In the beach ridge system of Ishinomaki Plain, Japan, several palaeotsunami deposits linked to past Japan Trench earthquakes have been reported. However, the number of palaeotsunami deposits reported at individual sites varies considerably. This study used ground penetrating radar (GPR) combined with geological evidence to better understand the relationship between palaeotopography and palaeotsunami deposit characteristics. The subsurface topography of the ~3000–4000 bp beach ridge was reconstructed using GPR data coupled with core surveys of the underlying sediments. We noted that the number (and thickness) of the palaeotsunami deposits inferred from the cores was controlled by the palaeotopography. Namely, a larger number of events and thicker palaeotsunami deposits were observed in depressions in the subsurface microtopography. We noted a total of three palaeotsunami deposits dated to between 1700 and 3000 cal bp , but they were only observed together in 11% of the core sites. This result is important for tsunami risk assessments that use the sedimentary evidence of past events because we may well be underestimating the number of tsunamis that have occurred. We suggest that GPR is an efficient and invaluable tool to help researchers identify the most appropriate places to carry out geological fieldwork in order to provide a more comprehensive understanding of past tsunami activity. Copyright © 2017 John Wiley & Sons, Ltd.     

基于绕月单卫星和双星测量的月球重力场恢复仿真分析

月球重力场是月球科学研究的重要部分,是进一步了解月球内部结构和构造的基础,也是我国探月计划“嫦娥工程”一个重要的科学研究内容.本文针对“嫦娥工程”,利用GSFC/NASA/USA的GEODYNII/SOLVE轨道分析软件,分析计算了利用单星跟踪数据恢复月球重力场的能力,同时模拟计算了双星跟踪数据在恢复月球重力场方面的能力,结合可能的工程环境我们对两种情况分别给出了30天、60天和90天的计算结果.计算表明双星相比于单星对月球重力场的中低阶位系数有比较显著的改善.