俯冲-增生型造山带增生楔流体研究进展

俯冲－增生型造山带弧前增生楔流体的特点为：盐度低、氯化物含量异常低，并含有丰富的CO2和CH4。流体以扩散式或沿断层带渠道式活动；泥火山、张裂隙充填脉、碳酸盐壳、深海生物群是流体活动的直接体现；流体活动影响着增生楔的内部结构和构造样式；增生楔中流体活动特征的研究对研究造山带的地质演化及矿床成因具有重要意义。     

DEVELOPMENT OF A DECISION SUPPORT SYSTEM FOR MANAGING PESTICIDE LOSSES IN AGRICULTURAL WATERSHEDS

1 INTRODUCTION Agricultural use of pesticides has been recognized as one of the important non-point pollution sources in the world, and the pesticide application to agricultural lands has led to large amounts of residues discharged into surface water through runoff (Leonard, 1990). There have been growing concerns about the fate and transport of pesticides in agricultural lands, due to the associated adverse impacts on water environment and human health (Agassi et al., 1995; Ng and Clegg…     

Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.     

Regional Stress Field and Seismic Dynamics Along the Border Zone Between Fujian, Guangdong and Jiangxi Provinces

The regional stress field and seismic dynamics along the border zone between Fujian, Guangdong and Jiangxi Provinces are studied based on the seismo-geological data, GPS measurement, and seismicity. The results show that: (1) the principal compressional stress of the stress field is oriented in NW-SE direction and the principal extensional stress is in NE-SW direction; (2) the WNW-ward compression and collision of the Philippine Sea Plate to the eastern coast of Taiwan Island are the most direct and most important dynamic source for preparation and occurrence of strong earthquakes in the Taiwan area and along the border zone between Fujian, Guangdong and Jiangxi Provinces.     

A numerical method of viscoelastic finite element coupled with spring-block model to simulate the interaction of faults and crustal blocks

A numerical method of viscoelastic finite element coupled with spring-block model is developed to study temporal processes from the slow tectonic motion of large-scale crust to the rapid failure of small-scale faults. Our modeling demonstrates that the motion of crustal blocks is driven by forces from tectonic plate boundaries, and the deformation is distributed on faults for the stress accumulating. The coupling model generates earthquake sequences that display a magnitude-frequency scaling consistent with Gutenberg-Richter law. The frictional heterogeneities affeci earthquakes occurrence and stresses distribution of crustal blocks. Rupture of earthquakes starts at the nucleation node, and propagates bilaterally along faults with the stress triggering, release and redistribution. The failure of faults releases part of crustal stresses, the stress state of crustal blocks near fault is affected by the rupture of local segments on the fault, and the stress state of crustal blocks far away from the fault is controlled by the seismic activity of the whole fault.     

Fine structure of Pn velocity beneath Sichuan-Yunnan region

We use 23298 Pn arrival-time data from Chinese national and provincial earthquake bulletins to invert fine structure of Pn velocity and anisotropy at the top of the mantle beneath the Sichuan-Yunnan and its adjacent region. The results suggest that the Pn velocity in this region shows significant lateral variation; the Pn velocity varies from 7.7 to 8.3 km/s. The Pn-velocity variation correlates well with the tectonic activity and heat flow of the region. Low Pn velocity is observed in southwest Yunnan, Tengchong volcano area, and the Panxi tectonic area. These areas have very active seismicity and tectonic activity with high surface heat flow. On the other hand, high Pn velocity is observed in some stable regions, such as the central region of the Yangtze Platform; the most pronounced high velocity area is located in the Sichuan Basin, south of Chengdu. Pn anisotropy shows a complex pattern of regional deformation. The Pn fast direction shows a prominent clockwise rotation pattern from east of the Tibetan block to the Sichuan-Yunnan diamond block to southwest Yunnan, which may be related to southeastward escape of the Tibetan Plateau material due to the collision of the Indian Plate to the Eurasia Plate. Thus there appears to be strong correlation between the crustal deformation and the upper mantle structure in the region. The delay times of events and stations show that the crust thickness decreases from the Tibetan Plateau to eastern China, which is consistent with the results from deep seismic sounding.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Re-discussion on the Jiaochang Arcuate Structure, Sichuan Province, and the Seismogenic Structure for Diexi Earthquake in 19331

The Jiaocbang arcuate structure is one of the numerous arcuate structural belts in Sichuan. The present paper gives a further argument about the characteristics of that arcuate structure and the new activity of the Songpinggou fault and affirms that the Songpinggou fault is an active fault in the Holocene epoch. The Diexi M7.5 earthquake took place in 1933 on the west wing of that arcuate structure, near the apex of the arc. Many authors have given quite different opinions about the genetic structure of that earthquake. The authors have made on-the-spot investigations time and again over recent years. Besides this, the authors have also further studied the shape of intensity contour lines, the distribution characteristics of ground surface seismic hazards, the left-lateral dislocation of buildings along the Songpinggou fault, the NWtrending ground fissures that developed on the ground surface after earthquake, and so on. On this basis, it is still considered that the seismogenic fault of the 1933 Diexi M7.5 earthquake was the Songpinggou fault on the west wing of the Jiaochang arcuate structure.     

试论碳酸盐岩上覆红土的形成模式及演化趋势

据长期对岩溶及红土化作用等的研究成果,本文全面系统地分析了碳酸盐岩上覆红土的形成及演化规律,提出了一个新的碳酸盐岩上覆红土的形成模式,进而深入阐明了碳酸盐岩上覆红土的演化规律及其在现代气候条件下的演化趋势等,在解决岩溶及红土学术界存在的碳酸盐岩上覆红土的形成、碳酸盐岩与上覆红土之间的相互关系及其发展演化规律等一系列重大疑难问题上向前迈进了一步,对相关学科的发展将产生积极的推动作用.     

A neural network approach for structural identification and diagnosis of a building from seismic response data

This work presents a novel procedure for identifying the dynamic characteristics of a building and diagnosing whether the building has been damaged by earthquakes, using a back‐propagation neural network approach. The dynamic characteristics are directly evaluated from the weighting matrices of the neural network trained by observed acceleration responses and input base excitations. Whether the building is damaged under a large earthquake is assessed by comparing the modal parameters and responses for this large earthquake with those for a small earthquake that has not caused this building any damage. The feasibility of the approach is demonstrated through processing the dynamic responses of a five‐storey steel frame, subjected to different strengths of the Kobe earthquake, in shaking table tests. Copyright © 2002 John Wiley & Sons, Ltd.