Measurement of a time-weighted average concentration of polycyclic aromatic hydrocarbons in seawater: An improved procedure of blue rayon hanging technique for monitoring benzo(a)pyrene

We have proposed a time-weighted measurement using blue rayon that selectively adsorbs and concentrates polycyclic aromatic hydrocarbons (PAH), e.g. benzo(a)pyrene (BaP). Though the method was demonstrated to be a convenient way to monitor PAH, the amount adsorbed to the blue rayon depends on the intensity of water stream and the level of PAH. The intensity of water stream was measured by ‘plaster ball’ method, while TWA of PAH in water was measured by a portable sampler using solid phase extraction cartridge. A level of BaP measured by the original blue rayon technique was corrected in this way by the water stream intensity, which correlated well with the TWA of BaP measured by the portable sampler. The improved blue rayon hanging method was applied to several field sites in the Seto Inland Sea of Japan. TWA of BaP ranged from 0.08 to 3.78 ngl⁻¹. These results showed the possibility that the method could be used to evaluate pollution in aquatic environment.     

Measurement of persistent organic pollutants (POPs) in plastic resin pellets from remote islands: toward establishment of background concentrations for International Pellet Watch

Plastic resin pellets collected from remote islands in the Pacific, Atlantic, and Indian Oceans and the Caribbean Sea were analyzed for polychlorinated biphenyls (PCBs), dichloro-diphenyltrichloroethane and its degradation products (DDTs), and hexachlorocyclohexanes (HCHs). Concentrations of PCBs (sum of 13 congeners) in the pellets were 0.1-9.9 ng/g-pellet. These were 1-3 orders of magnitude smaller than those observed in pellets from industrialized coastal shores. Concentrations of DDTs in the pellets were 0.8-4.1 ng/g-pellet. HCH concentrations were 0.6-1.7 ng/g-pellet, except for 19.3 ng/g-pellet on St. Helena, where current use of lindane is likely influence. This study provides background levels of POPs (PCBs<10 ng/g-pellet, DDTs <4 ng/g-pellet, HCHs <2 ng/g-pellet) for International Pellet Watch. Sporadic large concentrations of POPs were found in some pellet samples from remote islands and should be considered in future assessments of pollutants on plastic debris.     

Abrupt changes of intermediate-water oxygen in the northwestern Pacific during the last 27 kyr

An oxygen minimum zone (OMZ) currently exists at intermediate water depths on the northern Japanese margin in the northwestern Pacific. The OMZ results largely from a combination of high surface–water productivity and poor ventilation of intermediate waters. We investigated the late Quaternary history (last 27 kyr) of the intensity of this OMZ using changes in benthic foraminiferal carbon isotopes and assemblages in a sediment core taken on the continental slope off Shimokita Peninsula, northern Japan, at a water depth of 975 m. The core was located well within the region of the present-day OMZ and high surface–water productivity. The benthic foraminiferal δ¹³C values, which indicate millennial-scale fluctuations of nutrient contents at the sediment–water interface, were 0.48‰ lower during the last glacial maximum (LGM) than during the late Holocene. These results do not indicate the formation of glacial intermediate waters of subarctic Pacific origin, but rather the large contribution of high-nutrient water masses such as the Antarctic Intermediate Water, implying that the regional circulation pattern during the LGM was similar to that of modern times. Benthic foraminiferal assemblages underwent major changes in response to changes in dissolved oxygen concentrations in ocean floor sediments. The lowest oxygen and highest nutrient conditions, marked by dysoxic taxa and negative values of benthic foraminiferal δ¹³C, occurred during the Bølling/Allerød (B/A) and Pre-Boreal warming events. Dysoxic conditions in this region during these intervals were possibly caused by high surface–water productivity at times of reduced intermediate–water ventilation in the northwestern Pacific. The benthic assemblages show dysoxic events on approx. 100- to 200-year cycles during the B/A, reflecting centennial-scale productivity changes related to freshwater cycles and surface–water circulation in the North Pacific.     

Quasiperiodic small meanders of the Kuroshio off Cape Ashizuri and their inter-annual modulation caused by quasiperiodic arrivals of mesoscale eddies

A quasiperiodic variation of 100–110 days in the Kuroshio path off Cape Ashizuri, resulting from the passage of small meanders, was detected by observation with moored current meters during 1993–1995. TOPEX/POSEIDON altimeter data covering 9 years showed that the quasiperiodic variation period was not persistent and modulated twice, with a ∼110-day period from mid-1993 to late 1996, a ∼150-day period from late 1996 to mid-1999, and a ∼110-day period from mid-1999 to late 2001. The quasiperiodic variations of the Kuroshio path migration were contemporaneous with the quasiperiodic arrivals of mesoscale eddies from the east along 27–32°N over the same ∼110- and ∼150-day period quasiperiodic variations. The periodic arrivals of the eddies configure the periodic variations of the Kuroshio path and its inter-annual modulation.     

Iron–bentonite interactions in the Kawasaki bentonite deposit,Zao area,Japan

Greenish veins occurring in brecciated bentonite were found in the Kawasaki bentonite deposit of the Zao region in Miyagi Prefecture, Japan. Their occurrence possibly indicates the interaction of bentonite with Fe-rich hydrothermal solutions. In order to prove the hypothesis and understand the long-term mineralogical and petrographic evolution of bentonite during such interactions, the greenish veins and the surrounding altered bentonite were analyzed using X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron probe micro-analysis (EPMA), scanning transmission electron microscopy with energy dispersed spectroscopy (STEM-EDS) and micro X-ray absorption near-edge structure (XANES). The greenish veins resulting from hydrothermal solution are composed of mixed-layer minerals consisting of smectite and glauconite (glaucony), pyrite and opal. The occurrences indicate that glaucony and pyrite formed almost simultaneously from hydrothermal solution prior to opal precipitation. The mineral assemblages of the greenish veins and their surroundings indicate that the hydrothermal activity had most likely taken place at a temperature of less than 100 °C and that the pH and Eh conditions of the reacted solution were neutral to alkaline pH and reducing. The unaltered bentonite is composed mainly of Al smectite and opal. These minerals coexist as a mixture within the resolution level of the microprobe analyses. On the other hand, the bentonite in contact with the greenish veins consists of discrete opal grains and dioctahedral Al smectite containing Fe and was altered mineralogically and petrographically by the hydrothermal activity. Both the clay minerals and the opal were formed by dissolution and subsequent precipitation from the interaction of the original bentonite with the hydrothermal solution.     

Juxtaposition of adakite, boninite, high-TiO2 and low-TiO2 basalts in the Devonian southern Altay, Xinjiang, NW China

We present petrographic and geochemical data on representative samples of the Devonian adakite, boninite, low-TiO₂ and high-TiO₂ basalts and associated rocks in the southern Altay areas, Xinjiang, NW China. These volcanic rocks mostly occur as tectonic blocks within suture zones between the Siberian and Junggar plates. Adakite occurs in the Suoerkuduke area ca. 40 km south of Fuyun, and actually represents a poorly-sorted massive volcaniclastic deposit, mostly consisting of a suite of hornblende andesite to pyroxene andesite. The geochemical features of the adakite suggest its generation by melting of subducted oceanic crust. Boninite occurs in the Saerbulake area ca. 20 km southwest of Fuyun, as pillowed lava or pillowed breccia. It is associated with high-TiO₂ basalt/gabbro and low-TiO₂ basalt. The boninites are metamorphosed, but contain relict clinopyroxene with Mg# (=100*Mg/(Mg+Fe)) of 90–92, and Cr₂O₃ contents of 0.5–0.7 wt% and chromian spinel with Cr/(Cr+Al) ratio of 0.84. The bulk rock compositions of the boninites are characterized by low and U-shaped REE with variable La/Yb ratios. They are classified as high-Ca boninite. The Cr-rich cpx phenocryst and Chromian spinel suggests that the boninites were formed by melting of mildly refractory mantle peridotite fluxed by a slab-derived fluid component under normal mantle potential temperature conditions. Basaltic rocks occur as massive flows, pillowed lavas, tuff breccia, lapilli tuff and blocks in tectonic mélanges. Together with gabbros, the basaltic rocks are classified into high-TiO₂ (>1.7 wt%) and low-TiO₂ (<1.5 wt%) types. They show variable trace element compositions, from MORB-type through transitional back-arc basin basalt to arc tholeiite, or within plate alkalic basalt. A notable feature of the Devonian formations in the southern Altay is the juxtaposition of volcanic rocks of various origins even within a limited area; i.e. the adakite and the boninites are associated with high-TiO₂ and low-TiO₂ basalts and/or gabbros, respectively. This is most likely produced by complex accretion and tectonic processes during the convergence in the Devonian–Carboniferous paleo-Asian Ocean between the Siberian and Junggar plates.     

Tidal transport through the Tsugaru Strait — part I: Characteristics of the major tidal flow and its residual current

The potential role of the tide-induced time-mean flow (the tidal residual current) in determining transport through the Tsugaru Strait (located between the East/Japan Sea and the North Pacific) is investigated using a high-resolution numerical barotropic model. The calculated K₁, O₁, M₂, and S₂ tidal fields agree well with available observational records derived from both tide gauge and current meter measurements in the strait and the adjacent seas. The tidal residual current speed reaches 0.3 ms⁻¹ in two narrow “neck” areas where topographic sills are located. This result suggests that tides should be taken into account in estimating the long-term water mass and nutrient transport through narrow regions between the East/Japan Sea and the North Pacific. An interesting aspect of the tidal residual current field is the prediction of several active eddy zones in which sequences of eddy triplets develop in the vicinity of capes. Our vorticity analysis reveals that the interplay of topographic effects arising from both the headland and the sill around capes plays a critical role in the formation of these triple eddy patterns.     

Towards a new view of earthquake phenomena

Recent advances in the theory of fracture and fragmentation are reviewed. Empirical laws in seismology are interpreted from a fractal perspective, and earthquakes are viewed as a self-organized critical phenomenon (SOC). Earthquakes occur as an energy dissipation process in the earth's crust to which the tectonic energy is continuously input. The crust self-organizes into the critical state and the temporal and spatial fractal structure emerges naturally. Power-law relations known in seismology are the expression of the critical state of the crust. An SOC model for earthquakes, which explains the Gutenberg-Richter relation, the Omori's formula of aftershocks and the fractal distribution of hypocenters, is presented. A new view of earthquake phenomena shares a common standpoint with other disciplines to study natural complex phenomena with a unified theory.     

Dynamic compaction properties of bentonite-based materials

Dynamic compaction tests of bentonite-based materials (BBMs) with 100, 70 and 50% bentonite contents have been performed using five powdery bentonites with different physicochemical properties to establish the simplified evaluation method for dynamic compaction properties of BBMs. For a given bentonite content and a total compaction energy condition, the maximum dry density, ρ_dmax, and the optimum water content, w_opt, which are well-known indexes of compaction properties, for BBMs were determined according to the type of bentonite used for BBMs. For evaluation of those values of BBMs derived in this study, the plastic limit of BBM, w_pbbm, was defined as the plastic limit that was measured using the sample pulverized to a maximum grain size of less than 425 μm in the case of BBM with sand having a maximum grain size of more than 425 μm and was measured using the powdery bentonite itself in the case of BBM without sand. This study proposed equations for evaluating ρ_dmax and w_opt of BBMs with more than 50% bentonite content under the total compaction energy conditions of 551–2755 kN-m/m³ using w_pbbm. Finally, we related the equations derived in this study to the equation for evaluating hydraulic properties of compacted BBMs proposed in previous work and proposed the preparation method of BBMs with more than 50% bentonite content for constructing BBM buffer by in-situ compaction method.