The effect of microorganisms on Fe precipitation rates at neutral pH

The effect of microorganisms on Fe precipitation rates at neutral pH in the field was examined. The studied area was a cave having Fe-stalactites composed mainly of ferrihydrite and associated microorganisms. The microorganisms were covered with ferrihydrite. Water associated with stalactites was slightly supersaturated with respect to ferrihydrite, and had a dissolved oxygen concentration of 2 ppm, a pH of 6, and an Fe concentration of approximately 14 ppm. Fe precipitation rates were estimated from decreases in Fe concentrations in water during flowing through the Fe-stalactites. The estimated Fe precipitation rate in the field ranges from 6.8×10⁻⁸ to 4.0×10⁻⁷ mol/l/s. These values are in good agreement with bulk estimates of Fe-stalactite growth rates derived from the length increase (1.3 cm) of one formation over 30 days. The estimated Fe precipitation rates are faster by about four orders of magnitude than expected inorganic precipitation rates. On-site Fe precipitation experiments with sterilized and unsterilized Fe-stalactites and without Fe-stalactites indicate that microorganisms are the controlling factor accelerating Fe precipitation rates at neutral pH. These results suggest that microbially accelerated Fe precipitation rates are more likely related to exopolysaccharides and microbial surface properties than metabolic precipitation mechanisms.     

Geology and Mineralization at the Dajing Tin-polymetallic Ore Deposit, Inner Mongolia, China

Abstract: Dajing is a large-scale tin–polymetallic ore deposit in north China with Sn, Cu, Pb, Zn, Ag, and minor elements such as Co and In. The deposit is controlled by a passage-host structure system. Two groups of NE direction faults such as F₂ and F₁ are characterized by sinistral and multiphase activities, and the syn-ore NE faults with their derivative faults nearly in N-S direction constitute an important structure system as channelway for ore fluid. Around F₂ fault (mineralization center), metallic elements display horizontal zoning outwards from Sn, Cu to Cu, Sn, Pb, Zn, Ag and to Pb, Zn, Ag. Controlled by sinistral pull-apart vein system, the WNW direction host structure yielded the ore vein to "W" shape on horizontal plan while to staircase shape on vertical profile. Multiperiodic activities of the host structures system lead to multistage of ore mineralization. Four mineralization stages are recognized in the main mineralization, i.e. 1) cassiterite–arsenopyrite–quartz stage, 2) cassiterite-sulfide (or Cu–poly–metallic mineralization) stage, 3) massive pyrite stage, and 4) galena-sphalerite stage. Besides, fluid activities are identified here at the pre-mineral stage of the formation of quartz veins and sheared deformation, and at the post-mineral stage of quartz–calcite–fluorite deposition.
The earlier tin-rich ore solution raised from NE faults and its nearly N-S derivatives filled the NW-WNW direction fractures, and formed tin ore veins. Subsequent mineralization of Cu-polymetallic stage, pyrite stage and galena-sphalerite stage, overlapping on the same fracture system, sequentially expanded outwards from the fractures, and produced different kinds of ore types and mineralization zoning.     

Electrokinetic phenomena associated with a water injection experiment at the Nojima fault on Awaji Island, Japan

Abstract Self-potential variations were measured to estimate the magnitude of electrokinetic and hydrological parameters (zeta potential and permeability) of the Nojima Fault zone in Awaji, Japan. The study observed self-potential variations that seemed to be associated with water flow from the injection well to the fracture zone, which were induced by turning the injection on and off. Amplitudes of the variations were a few to 0.03 V across 320–450 m dipoles. These variations can be explained well with an electrokinetic model. The quantity k/ζ (permeability/zeta potential) is in the range 1.6 × 10⁻¹³− 5.4 × 10⁻¹³ m²/V. Permeability of the Nojima fault zone can be estimated as approximately 10⁻¹⁶–10⁻¹⁵ m² on the assumption that the zeta potential is in the range –0.01 to –0.001 V.     

Detection of crustal inhomogeneity in the Nojima Fault zone using earth current noise

Abstract A resistivity survey method using artificial telluric noise was examined and applied to a field of a fault zone. The electric earth current was measured at 50 sites in the Nojima Fault zone, which is in the northwestern part of Awaji Island, southwestern Japan. The dominant component of the observed electric field is supposed to be leakage currents from DC electric railways running outside the island. Amplitude and polarization of the stray current were systematically investigated and were revealed to represent the subsurface electrical structure of the study area. Some features on the fault zone's electrical structure have been pointed out, including: (i) an electrical boundary that corresponds to a geological one between granite (resistive) and sediments (conductive); and (ii) a low resistivity spot on the surface rupture of the earthquake fault. The structure estimated in the present study is both qualitatively and quantitatively consistent with previous resistivity surveys done using other methods pursued in the same area. It shows the validity of the 'stray current method' as one that is easy and uses low-cost resistivity exploration tools in a region where the effect of artificial noise caused mainly by leakage currents from electrical railways cannot be ignored.     

Horizontal layered structure with heterogeneity beneath continents and island arcs from particle orbits of long-period P waves

We investigate the particle orbits of long-period (about 20 s) P waves observed with the global seismic network. By analysing 84 three-component seismograms recorded at 25 stations from 60 earthquakes occurring beneath 300 km, we quantitatively evaluate the orbits by three sets of eigenvalues and eigenvectors, using a covariance matrix method. The eigenvalues for P waves recorded at stations located on continents are explained by the standard horizontal layered structure model (iasp91). On the other hand, the orbits observed at stations close to island arcs are affected not only by the horizontal layered structure but also by heterogeneity due to subducting plates, mantle diapirs and so on. On the basis of a single-scattering model for a plane P wave, we quantify the heterogeneities by an isotropic scattering coefficient g0. Fitting the theoretical eigenvalues to the observed ones, we estimate g0 for the crust and upper mantle beneath continents to be less than 0.0005 km^-1, and the mean g₀ for the structure beneath island arcs to be about 0.0015 to 0.003 km^-1.     

Pyroxenes in the system Mg2Si2O6-CaMgSi2O6 at high pressure

The enstatite-diopside solvus in the system Mg₂Si₂O₆-CaMgSi₂O₆ has been experimentally determined within the pressure range 5–40 kbars and the temperature range 900–1500°C. Experiments involving reversal of the phase boundaries by unmixing from glass starting material and by reaction of pure clinoenstatite and diopside showed difficulty in achieving equilibration due to persistence of metastable, subcalcic clinopyroxene and to the sluggishness of reaction rate. The experimental data showed that the temperature dependence of the diopside limb is less than previously accepted. At 1500°C and 30 kbars subcalcic diopside found by Davis and Boyd (1966) is shown to be metastable with respect to enstatite and more calcic diopside of composition En_42.3Di_57.7. The solvus widens with increasing pressure between 5 and 40 kbars at 1200°C, but at 900°C the pressure effect on the solvus is very small. The stability relationships of the four pyroxenes, protoenstatite, enstatite, iron-free pigeonite and diopside are summarized, based on data from the literature and the present study.     

Stability and P–V–T equation of state of KAlSi3O8-hollandite determined by in situ X-ray observations and implications for dynamics of subducted continental crust material

In situ X-ray diffraction measurements of KAlSi₃O₈-hollandite (K-hollandite) were performed at pressures of 15–27 GPa and temperatures of 300–1,800 K using a Kawai-type apparatus. Unit-cell volumes obtained at various pressure and temperature conditions in a series of measurements were fitted to the high-temperature Birch-Murnaghan equation of state and a complete set of thermoelastic parameters was obtained with an assumed K′_300,0=4. The determined parameters are V _300,0=237.6(2) Å³, K _300,0=183(3) GPa, (?K _T,0/?T) _P =?0.033(2) GPa K^?1, a ₀=3.32(5)×10^?5 K^?1, and b ₀=1.09(1)×10^?8 K^?2, where a ₀ and b ₀ are coefficients describing the zero-pressure thermal expansion: α _T,0 = a ₀ + b ₀ T. We observed broadening and splitting of diffraction peaks of K-hollandite at pressures of 20–23 GPa and temperatures of 300–1,000 K. We attribute this to the phase transitions from hollandite to hollandite II that is an unquenchable high-pressure phase recently found. We determined the phase boundary to be P (GPa)=16.6 + 0.007 T (K). Using the equation of state parameters of K-hollandite determined in the present study, we calculated a density profile of a hypothetical continental crust (HCC), which consists only of K-hollandite, majorite garnet, and stishovite with 1:1:1 ratio in volume. Density of HCC is higher than the surrounding mantle by about 0.2 g cm^?3 in the mantle transition zone while this relation is reversed below 660-km depth and HCC becomes less dense than the surrounding mantle by about 0.15 g cm^?3 in the uppermost lower mantle. Thus the 660-km seismic discontinuity can be a barrier to prevent the transportation of subducted continental crust materials to the lower mantle and the subducted continental crust may reside at the bottom of the mantle transition zone.     

Interactions of uranium with bacteria and kaolinite clay

We assessed the accumulation of uranium (VI) by a bacterium, Bacillus subtilis, suspended in a slurry of kaolinite clay, to elucidate the role of microbes on the mobility of U(VI). Various mixtures of bacteria and the koalinite were exposed to solutions of 8 × 10^− 6 M- and 4 × 10^− 4 M-U(VI) in 0.01 M NaCl at pH 4.7. After 48 h, the mixtures were separated from the solutions by centrifugation, and treated with a 1 M CH₃COOK for 24 h to determine the associations of U within the mixture. The mixture exposed to 4 × 10^− 4 M U was analyzed by transmission electron microscope (TEM) equipped with EDS. The accumulation of U by the mixture increased with an increase in the amount of B. subtilis cells present at both U concentrations. Treatment of kaolinite with CH₃COOK, removed approximately 80% of the associated uranium. However, in the presence of B. subtilis the amount of U removed was much less. TEM–EDS analysis confirmed that most of the U removed from solution was associated with B. subtilis. XANES analysis of the oxidation state of uranium associated with B. subtilis, kaolinite, and with the mixture containing both revealed that it was present as U(VI). These results suggest that the bacteria have a higher affinity for U than the kaolinite clay mineral under the experimental conditions tested, and that they can immobilize significant amount of uranium.     

A cyclone over Saudi Arabia on 5 January 2002: A case study

Summary A shallow and short-lived subsynoptic cyclone is discussed as one of typical events causing natural disasters over Saudi Arabia on 5 January 2002 using the Japan Meteorological Agency global analysis dataset. The main cause for its formation was vorticity stretching. On the same day widespread rainfall over Saudi Arabia with enhanced precipitation over the mountainous Jeddah region was also observed using the Global Precipitation Climatology Project dataset. Owing to eastward-moving wintertime synoptic-scale Mediterranean disturbances, this rainfall was associated with frontal activity, modified by the local orography.