A lower trophic ecosystem model including iron effects in the Okhotsk Sea

We applied a three-dimensional ecosystem-physical coupled model including iron the effect to the Okhotsk Sea. In order to clarify the sources of iron, four dissolved iron compartments, based on the sources of supply, were added to Kawamiya et al.'s [1995, An ecological-physical coupled model applied to Station Papa. Journal of Oceanography, 51, 635-664] model (KKYS) to create our ecosystem model (KKYS-Fe). We hypothesized that four processes supply iron to sea water: atmospheric loadings from Northeastern Asia, input from the Amur River, dissolution from sediments and regeneration by zooplankton and bacteria. We simulated one year, from 1 January 2001 to 31 December 2001, using both KKYS-Fe and KKYS. KKYS could not reproduce the surface nitrate distribution after the spring bloom, whereas KKYS-Fe agreed well with observations in the northwestern Pacific because it includes iron limitation of phytoplankton growth. During the spring bloom, the main source of iron at the sea surface is from the atmosphere. The contribution of riverine iron to the total iron utilized for primary production is small in the Okhotsk Sea. Atmospheric deposition, the iron flux from sediment and regeneration of iron in the water column play important roles in maintaining high primary production in the Okhotsk Sea.     

Mechanism and future risk of slope instability induced by extreme rainfall event in Izu Oshima Island,Japan

Natural Hazards - A volcanic slope in Izu Oshima Island in Japan experienced a profound rain-induced disaster in October 2013. Since this slope had been stable for centuries except for minor...     

Semi-brittle behavior of wet olivine aggregates: the role of aqueous fluid in faulting at upper mantle pressures

The role of aqueous fluid in fracturing in subducting slabs was investigated through a series of deformation experiments on dunite that was undersaturated (i.e., fluid-free) or saturated with water (i.e., aqueous-fluid bearing) at pressures of 1.0–1.8 GPa and temperatures of 670–1250 K, corresponding to the conditions of the shallower regions of the double seismic zone in slabs. In situ X-ray diffraction, radiography, and acoustic emissions (AEs) monitoring demonstrated that semi-brittle flow associated with AEs was dominant and the creep/failure strength of dunite was insensitive to the dissolved water content in olivine. In contrast, aqueous fluid drastically decreased the creep/failure strength of dunite (up to ~?1 GPa of weakening) over a wide range of temperatures in the semi-brittle regime. Weakening of the dunite by the aqueous fluid resulted in the reduction of the number of AE events (i.e., suppression of microcracking) and shortening of time to failure. The AE hypocenters were located at the margin of the deforming sample while the interior of the faulted sample was aseismic (i.e., aseismic semi-brittle flow) under water-saturated conditions. A faulting (slip rate of ~?10^?3 to 10^?4 s^?1) associated with a large drop of stress (Δσ?~?0.5 to 1 GPa) and/or pressure (ΔP?~?0.5 GPa) was dominant in fluid-free dunite, while a slow faulting (slip rate?<?8?×?10^?5 s^?1) without any stress/pressure drop was common in water-saturated dunite. Aseismic semi-brittle flow may mimic silent ductile flow under water-saturated conditions in subducting slabs.     

Anomalously large seismic amplifications in the seafloor area off the Kii peninsula

Seismic wave amplifications were investigated using strong-motion data obtained from the ground’s surface (K-net) on the Kii peninsula (southwestern Japan) and from the network of twenty seismic stations on the seafloor (DONET) located off the peninsula near the Nankai trough. Observed seismograms show that seismic signals at DONET stations are significantly larger than those at K-net stations, independent of epicentral distances. In order to investigate the cause of such amplifications, seismic wavefields for local events were simulated using the finite-difference method, in which a realistic 3D velocity structure in and around the peninsula was incorporated. Our simulation results demonstrate that seismic waves are significantly amplified at DONET stations in relation to the presence of underlying low-velocity sediment layers with a total thickness of up to 10 km. Our simulations also show considerable variations in the degree of amplification among DONET stations, which is attributed to differences in the thickness of the sediment layers. The degree of amplification is relatively low at stations above thin sediment layers near the trough axis, but seismic signals are much more amplified at stations closer to the Kii peninsula, where sediment layers are thicker than those at the trough axis. Simulation results are consistent with observations. This study, based on seafloor observations and simulations, indicates that because seismic signals are amplified due to the ocean-specific structures, the magnitude of earthquakes would be overestimated if procedures applied to data observed at land stations are used without corrections.     

Development of an automatic volcanic ash sampling apparatus for active volcanoes

We develop an automatic system for the sampling of ash fall particles, to be used for continuous monitoring of magma ascent and eruptive dynamics at active volcanoes. The system consists of a sampling apparatus and cameras to monitor surface phenomena during eruptions. The Sampling Apparatus for Time Series Unmanned Monitoring of Ash (SATSUMA-I and SATSUMA-II) is less than 10 kg in weight and works automatically for more than a month with a 10-kg lead battery to obtain a total of 30 to 36 samples in one cycle of operation. The time range covered in one cycle varies from less than an hour to several months, depending on the aims of observation, allowing researchers to target minute-scale fluctuations in a single eruptive event, as well as daily to weekly trends in persistent volcanic activity. The latest version, SATSUMA-II, also enables control of sampling parameters remotely by e-mail commands. Durability of the apparatus is high: our prototypes worked for several months, in rainy and typhoon seasons, at windy and humid locations, and under strong sunlight. We have been successful in collecting ash samples emitted from Showa crater almost everyday for more than 4 years (2008–2012) at Sakurajima volcano in southwest Japan.     

P–T conditions of metabasites within regional metapelites in far-eastern Nepal Himalaya and its tectonic meaning

Metabasites exposed in far-eastern Nepal provide an important insight into the metamorphic evolution of the Himalayan orogen independent from data obtained on metapelites. The P–T conditions and formation process of mafic granulite intercalated within Early Oligocene migmatites and two amphibolites surrounded by Early Miocene metapelites were inferred from pseudosection modeling and conventional geothermobarometry combined with the occurrences of field and microstructures. A mafic granulite in the Higher Himalaya Crystalline Sequence (HHCS) yields P–T conditions of 6.5–8 kbar, 730–750 °C. The similar peak P–T condition and retrograde path with low P/T gradient of mafic granulite and surrounding migmatite indicate that both rocks were simultaneously metamorphosed and exhumed together along the tectonic discontinuities in the HHCS. In contrast, the P–T conditions (2–5 kbar, 500–600 °C) of highly-deformed amphibolite block above the Main Central Thrust (MCT) records significantly lower pressure than garnet-mica gneisses in the country rock, suggesting that the amphibolite block derived from upper unit of the MCT zone and became tectonically mixed with the gneisses of hanging wall near the surface. An amphibolite lense below the MCT preserves the prograde P–T conditions (6–7.5 kbar, 550–590 °C) of Early Miocene syn-tectonic metamorphism that occurred in the MCT zone. This study indicates the top-to-the south movement of the MCT zone results in the tectonic assembly of rocks with different P–T–t conditions near the MCT.     

Hydrochemical and isotopic characteristics of groundwater in the Ndop plain,northwest Cameroon: resilience to seasonal climatic changes

Shallow groundwater (>30 mbgl) is an essential source of drinking water to rural communities in the Ndop plain, northwest Cameroon. As a contribution to water management, the effect of seasonal variation on the groundwater chemistry, hydrochemical controls, drinking quality and recharge were investigated during the peaks of the dry (January) and rainy (September) seasons. Field measurements of physical parameters were preceded by sampling 58 groundwater samples during both seasons for major ions and stable isotope analyses. The groundwater, which was barely acidic (mean pH of 6) and less mineralised (TDS < 272 mg/l), showed no significant seasonal variation in temperature, pH and TDS during the two seasons. The order of cation abundance (meq/l) was Na⁺ > Ca²⁺ > Mg²⁺ > K⁺ and Na⁺ > Mg²⁺ > Ca²⁺ > K⁺ in the dry and rainy seasons, respectively, but that of anions ( \( {\text{HCO}}_{3}^{ - } \)  >  \( {\text{NO}}_{3}^{ - } \)  > Cl^? >  \( {\text{SO}}_{4}^{2 - } \)  > F^?) was similar in both seasons. This suggests a negligible effect of seasonal variations on groundwater chemistry. The groundwater, which was CaMgHCO₃ and NaHCO₃, is chemically evolved rainfall (CaMgSO₄Cl) in the area. Silicate mineral dissolution and cation-exchange were the main controls on groundwater chemistry while there was little anthropogenic influence. The major ions and TDS concentrations classified the water as suitable for human consumption as per WHO guidelines. The narrow cluster of δ¹⁸O and δD of same groundwater from both seasons between the δ¹⁸O and δD values of May–June precipitation along the Ndop Meteoric Water Line indicates meteoric origin, rapid recharge (after precipitation) and timing of recharge between May and June rainfall. Diffuse groundwater recharge mainly occurs at low altitudes (<1,400 m asl) within the plain. Besides major ions and TDS, the similar δ¹⁸O and δD of groundwater from both seasons indicate a consistent groundwater recharge and flow pattern throughout the year and resilience to present day short-term seasonal climatic variations. However, controlled groundwater abstraction is recommended given the increasing demand.     

Using GIS to develop a mobile communications network for disaster-damaged areas

Communications network damage resulting from a large disaster causes difficulties in the ability to rapidly understand the current situation and thus make appropriate decisions towards mitigating problems, such as where to send and dispense emergency supplies. The research outlined in this paper focuses on the rapid construction of a network after a disaster occurs. This study suggests ZigBee and geographic information systems (GIS) technologies to resolve these problems and provide an effective communication system. The experimental results of the ZigBee network system are presented, examples are provided of the mapping and analysis undertaken using GIS for the disaster-stricken area of Tsukuba City, Japan, and the communications node arrangements are determined for this region. These results demonstrate the effectiveness of establishing such a communications system for supporting efforts to relieve disaster-damaged areas.     

Fe–Mg partitioning between post-perovskite and ferropericlase in the lowermost mantle

Fe–Mg partitioning between post-perovskite and ferropericlase has been studied using a laser-heated diamond anvil cell at pressures up to 154 GPa and 2,010 K which corresponds to the conditions in the lowermost mantle. The composition of the phases in the recovered samples was determined using analytical transmission electron microscopy. Our results reveal that the Fe–Mg partition coefficient between post-perovskite and ferropericlase (K _D^PPv/Fp) increases with decreasing bulk iron content. The compositional dependence of K _D^PPv/Fp on the bulk iron content explains the inconsistency in previous studies, and the effect of the bulk iron content is the most dominant factor compared to other factors, such as temperature and aluminum content. Iron prefers ferropericlase compared to post-perovskite over a wide compositional range, whereas the iron content of post-perovskite (X _Fe^PPv, the mole fraction) does not exceed a value of 0.10. The iron-rich ferropericlase phase may have significant influence on the physical properties, such as the seismic velocity and electrical conductivity at the core–mantle boundary region.