Variations in snowmelt energy and energy balance characteristics with larch forest density on Mt Iwate,Japan: observations and energy balance analyses

The variation in snowmelt energy and energy components were evaluated with respect to forest density. Surface snowmelt rates, surface evaporation from snow cover and meteorological elements were measured in the open and under sparse (411 trees/ha) and dense (1433 trees/ha) larch canopies. The surface snowmelt rate decreased as the forest density increased. Based on the observations and energy balance analyses, we concluded the following. (1) Albedo decreased while the bulk coefficient for latent heat increased with forest density. (2) The duration of snowmelt increased with forest density because the energy for nocturnal cooling of the snow cover decreased. (3) When comparing the open and forested sites, the changes in snowmelt energy with forest density were caused by sensible heat flux. However, the contribution of net radiation was highest in the forested sites. Therefore, the effects of forest cover on the snowmelt energy were different when comparing both the open and forested sites and the sparse and densely forested sites. (4) The ratio of net radiation to snowmelt energy increased with forest density; although both snowmelt energy and net radiation decreased with increased forest density, the snowmelt energy decreased more rapidly. Sensible heat also decreased as forest density increased. Both albedo and downward long‐wave radiation influenced net radiation. Copyright © 1999 John Wiley & Sons, Ltd.     

Optimization of dissolved urea measurements in coastal waters with the combination of a single reagent and high temperature

Urea is an unstable and intermediate organic nitrogenous compound present in coastal environments and is derived from the excretion of some aquatic organisms and wastewater discharges. Urea plays an important role in the nitrogen cycle, where it is utilized by algae, including diatoms. However, there are very limited relevant data on the production, consumption, and degradation of urea because of the lack of appropriate measurement techniques. The conventional method is based on the formation of a colored product when urea reacts with diacetyl monoxime in a sulfuric acid solution. We examined the optimal conditions for the formation of the colored product; specifically, we evaluated different temperatures (22–80 °C), reaction times, mixing ratios of color reagents, and sample storage times. Application of the single mixed color-developing reagent (COLDER) at 70 °C resulted in the optimal formation of the colored product within a short reaction time of 60 min. This method was then used to measure dissolved urea in different coastal environments. The concentrations detected were as follows: 0.65–0.72, 0.49–0.58, and 1.09–2.28 µM urea-N at coral reef, seagrass, and mangrove sites, respectively. Our results showed high precision (SD = 0.02, CV = 1.2%), a low detection limit (0.03 µM urea-N), and a high recovery rate (94–99%). In summary, this high-temperature procedure for urea measurements should be valuable for obtaining high-precision data that can further the understanding of urea dynamics and its role in coastal ecosystems.     

Cross-scale coupling at a perpendicular collisionless shock

A full particle simulation study is carried out on a perpendicular collisionless shock with a relatively low Alfven Mach number (M_A = 5). Recent self-consistent hybrid and full particle simulations have demonstrated ion kinetics are essential for the non-stationarity of perpendicular collisionless shocks, which means that physical processes due to ion kinetics modify the shock jump condition for fluid plasmas. This is a cross-scale coupling between fluid dynamics and ion kinetics. On the other hand, it is not easy to study cross-scale coupling of electron kinetics with ion kinetics or fluid dynamics, because it is a heavy task to conduct large-scale full particle simulations of collisionless shocks. In the present study, we have performed a two-dimensional (2D) electromagnetic full particle simulation with a “shock-rest-frame model”. The simulation domain is taken to be larger than the ion inertial length in order to include full kinetics of both electrons and ions. The present simulation result has confirmed the transition of shock structures from the cyclic self-reformation to the quasi-stationary shock front. During the transition, electrons and ions are thermalized in the direction parallel to the shock magnetic field. Ions are thermalized by low-frequency electromagnetic waves (or rippled structures) excited by strong ion temperature anisotropy at the shock foot, while electrons are thermalized by high-frequency electromagnetic waves (or whistler mode waves) excited by electron temperature anisotropy at the shock overshoot. Ion acoustic waves are also excited at the shock overshoot where the electron parallel temperature becomes higher than the ion parallel temperature. We expect that ion acoustic waves are responsible for parallel diffusion of both electrons and ions, and that a cross-scale coupling between an ion-scale mesoscopic instability and an electron-scale microscopic instability is important for structures and dynamics of a collisionless perpendicular shock.     

Growth stimulation and inhibition of natural phytoplankton communities by model organic ligands in the western subarctic Pacific

The influence of organic ligands on natural phytoplankton growth was investigated in high-nitrate low-chlorophyll (HNLC) waters and during a phytoplankton bloom induced by a mesoscale iron enrichment experiment (SEEDS II) in the western subarctic Pacific. The growth responses of the phytoplankton in the treatments with iron complexed with model ligand were compared with those with inorganic iron or a control. Desferrioxamine B and protoporphyrin IX were used as models for hydroxamate-type siderophore and tetrapyrrole-type cell breakdown ligand, respectively. In the HNLC water, iron associated with protoporphyrin IX especially stimulated smaller phytoplankton (<10 μm) growth, 1.5-fold more than did inorganic iron. Surprisingly, only the addition of protoporphyrin IX stimulated small phytoplankton growth, suggesting that these cell breakdown ligands might be more bioavailable for them. The protoporphyrin IX’s stimulatory effect on small phytoplankton was not observed during bloom decline phase. The growth of phytoplankton was inhibited in the treatment with desferrioxamine B-complexed iron, suggesting its low bioavailability for the natural phytoplankton community. Its inhibitory effects were particularly pronounced in pico-eukaryotic phytoplankton. During the iron-induced bloom, the phytoplankton’s iron-stress response gradually increased with the desferrioxamine B concentration, suggesting that the competition for iron complexation between natural ligands and desferrioxamine B affected phytoplankton growth. However, the pico-eukaryotes did seem better able to utilize the desferrioxamine B-complexed iron during the bloom-developing phase. These results indicate that the iron bioavailability for phytoplankton differs between bloom-developing and bloom-decline phases.     

Year-round accumulation of particulate organic matter in the estuarine turbidity maximum: comparative observations in three macrotidal estuaries (Chikugo, Midori, and Kuma Rivers), southwestern Japan

The inner part of the Ariake Sea is one of the most productive estuarine systems in Japan. To examine potential food items for estuarine organisms, we conducted monthly observations of the dynamics of particulate organic matter along the macrotidal Chikugo River estuary in 2005 and 2006. In the neighboring macrotidal Midori and Kuma River estuaries, comparative observations were made. High turbidity and strong vertical mixing were observed only at low salinities (<10) in the Chikugo River estuary. In contrast, the Midori and Kuma River estuaries were characterized by less turbid and less mixed waters. Concentrations of particulate organic carbon often exceeded 5?mg?l^?1 in or close to the estuarine turbidity maximum (ETM) of the Chikugo River estuary. However, such high concentrations were rarely observed in the other two estuaries. The observed differences could be attributable to different hydrodynamic processes related to the different lengths of tidal reaches: 23, 8, and 6?km in the Chikugo, Midori, and Kuma Rivers, respectively. In the Chikugo River estuary, spatiotemporal changes of chlorophyll a suggested that phytoplankton occurred abundantly up- and/or downstream from the ETM especially during the warm season. In contrast, pheophytin (i.e., plant detritus) always accumulated in or close to the ETM. Carbon stable isotope ratios and carbon to nitrogen ratios indicated that the plant detritus was derived from phytoplankton and terrestrial plants. The Chikugo River estuary has a high potential to support the production of estuarine organisms through abundant plant detritus in the well-developed ETM all the year round.     

Atmospheric gravity waves identified by ground-based observations of the intensity and rotational temperature of OH airglow

Spectroscopic observations of OH airglow undertaken on May 2, 2006 at Uji, Japan reveal variations in intensity and rotational temperature related to the passage of an atmospheric gravity wave. The variations exhibit a period of approximately 1 h and magnitudes of 2–6% in intensity and 0.5–2% in rotational temperature. The vertical wavelength and intrinsic frequency of the atmospheric gravity wave were determined from the horizontal wavelength derived by an OH airglow imager, the background horizontal wind velocity obtained by the middle and upper atmosphere (MU) radar, and the dispersion relationship. The observed variations are consistent with the values calculated using the model of Liu, A.Z., Swenson, G.R. [2003. A modeling study of O₂ and OH airglow perturbations induced by atmospheric gravity waves. J. Geophys. Res. 108 (No. D4), 4151. doi:10.1029/2002JD002474].     

Two extraterrestrial dust horizons found in the Dome Fuji ice core,East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ～ 2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10⁶ km². Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10⁹ kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-μm to μm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10⁹ kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.     

Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

A Late Cretaceous mammalian dentary from the Ashizawa Formation (Futaba Group), Fukushima,northeastern Japan

A mammalian dentary discovered in the Coniacian Ashizawa Formation (Fukushima, northeastern Japan) is described. The specimen is a fragment of the horizontal ramus of a left edentulous dentary with five alveoli, the distal four of which are plugged with broken roots. Based on the morphologies of the dentary and the roots, it is considered to be of a therian mammal. This constitutes the first discovery of a Mesozoic mammal in northeastern Japan and highlights the potential for future mammal discoveries in the Cretaceous System in northeastern Japan, which will be significant for disclosure of the mammalian faunal evolution in East Asia during the Late Cretaceous.