类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.     

Hydraulic properties of and pressure-head dynamics in thick pyroclastic-fall deposits in Atsuma,Northern Japan: implications for the role of water in shallow landslides induced by the 2018 Hokkaido Eastern Iburi Earthquake

Landslides - The 2018 Hokkaido Eastern Iburi Earthquake triggered numerous shallow landslides on slopes covered with thick pyroclastic-fall deposits. The landslides occurred more frequently on...     

Water saturated phase relations of some andesites with application to the estimation of the initial temperature and water pressure at the time of eruption

Near-liquidus phase relations in one-atmosphere dry and water-saturated high pressure conditions were experimentally determined on products of three historic andesitic eruptions. Run conditions ranged from 900 to 1100°C, at pressures up to 1500 bars with fO₂ controlled close to the nickel-nickel oxide (NNO) buffer. In order to represent the compositions of the true liquid parts of the erupting magmas, groundmass portions were mechanically separated from the porphyritic andesites. Such groundmass materials should lie exactly on the liquidus field boundary between the phases precipitating from the magma just prior to eruption under the prevailing P-T condition.All the samples showed a crossing of the plagioclase and orthopyroxene liquidi in the pressure-temperature range from 1 to 800 bar and 950–1090°C. The crossing condition approximates the magmatic condition immediately prior to eruption. In the case of the 1970 eruption of Akita-komagatake, the crossing point is at 150 bar and 1090°C, matching closely the observed explosive gas pressure and the temperature. In both cases of the 1783 eruption of Asama and the 1914–1915 eruption of Sakurajima volcanoes, the crossing point shift from higher water pressure and lower temperature for the earlier erupting magmas to lower pressure and higher temperature for the later magmas. This regularity may be explained by a vertical gradient of the temperature and water content within the magma column prior to eruption.     

Global synchroneity of a positive carbon isotope excursion at the Cenomanian/Turonian boundary: Validation by calcareous microfossil biostratigraphy of the Yezo Group, Hokkaido, Japan

Abstract Isotopic analyses of organic carbon from the mid-Cretaceous sequence in Hokkaido, Japan, revealed a 2‰ positive excursion of δ¹³C values at the biostratigraphically defined Cenomanian/Turonian (C/T) boundary recognized in the Yezo Group. The planktonic foraminiferal Whiteinella archaeocretacea Zone, which is known to bracket the Cenomanian/Turonian boundary elsewhere in the world, was recognized in the Oyubari area of central Hokkaido based on the distribution of commonly occurring planktonic foraminifera. In the Tappu area of northwestern Hokkaido, where diagnostic planktonic foraminifera are rare but calcareous nannoplankton occur commonly, the interval coeval with the W. archaeocretacea Zone can also be established by recognizing the conjoined last appearance levels of Corollithion kennedyi and Axopodorhabdus albianus, both calcareous nannoplankton species. Carbon isotope profiles exhibit a similar pattern with comparable peaks and troughs occurring in the same stratigraphic position in the sequences. A prominent, positive 2‰ shift of δ¹³C values, here called ‘δ¹³C spike’ occurs in the middle of the W. archaeocretacea Zone in the Oyubari area and just above the conjoined last appearances of the two above-mentioned nannoplankton taxa in the Tappu area. The Cenomanian/Turonian boundary can be drawn just above the peak position of the spike in both sections. The Rock Eval analyses and biomarker analyses of organic carbon indicate that organic carbon subjected to our isotope analyses is of terrestrial origin. Therefore, the observed 2%o shift should reflect changes in the isotopic composition of the atmospheric CO₂. A unique layer composed predominantly of sand-grain sized spumellarian Radiolaria is present immediately above the δ¹³C spike both in the Oyubari and Tappu areas, suggesting an increasing availability of both nutrients and silica in surface waters.     

On the use of JMA intensity in earthquake early warning systems

The estimation of strength of shaking at a site from the initial P-wave portion of ground motion is the key problems for shortening the alert time of the earthquake Early Warning (EEW). The most of the techniques proposed for the purpose utilize (a) ground motion models based on the estimated magnitude and hypocentral distance, or (b) the interim proxies, such as initial vertical displacement P _d . We suggest the instrumental Japan Meteorological Agency (JMA) intensity (JMA_I) as a characteristic for fast estimation of damage potential in the EEW systems. We investigated the scaling relations between JMA_I measured using the whole earthquake recordings (overall intensity) and using particular time intervals of various duration (2.0–8.0 s) starting from the P-wave arrival (preliminary intensity). The dataset included 3,660 records (K-NET and the KiK-net networks) from 55 events (M _W 4.1–7.4) occurred in 1999–2008 in Japan. We showed that the time interval of 4–5 s from the P-wave arrival can be used for reliable estimations of the overall intensity with the average standard error of about 0.5 JMA units. The uncertainty in the prediction may be reduced by consideration of local site conditions or by development of the station-specific models.     

Scoria cone formation through a violent Strombolian eruption: Irao Volcano, SW Japan

Scoria cones are common volcanic features and are thought to most commonly develop through the deposition of ballistics produced by gentle Strombolian eruptions and the outward sliding of talus. However, some historic scoria cones have been observed to form with phases of more energetic violent Strombolian eruptions (e.g., the 1943–1952 eruption of Parícutin, central Mexico; the 1975 eruption of Tolbachik, Kamchatka), maintaining volcanic plumes several kilometers in height, sometimes simultaneous with active effusive lava flows. Geologic evidence shows that violent Strombolian eruptions during cone formation may be more common than is generally perceived, and therefore it is important to obtain additional insights about such eruptions to better assess volcanic hazards. We studied Irao Volcano, the largest basaltic monogenetic volcano in the Abu Monogenetic Volcano Group, SW Japan. The geologic features of this volcano are consistent with a violent Strombolian eruption, including voluminous ash and fine lapilli beds (on order of 10^?1 km³ DRE) with simultaneous scoria cone formation and lava effusion from the base of the cone. The characteristics of the volcanic products suggest that the rate of magma ascent decreased gradually throughout the eruption and that less explosive Strombolian eruptions increased in frequency during the later stages of activity. During the eruption sequence, the chemical composition of the magma became more differentiated. A new K–Ar age determination for phlogopite crystallized within basalt dates the formation of Irao Volcano at 0.4?±?0.05 Ma.     

Effects of bottom bracings on torsional dynamic characteristics of horizontally curved twin I-girder bridges with different curvatures

Curved twin I-girder bridges (CTIGBs) have low torsional stiffness that makes them vulnerable to dynamic loads.This study investigates the effects of bottom bracings on the torsional dynamic characteri...     

The earliest stage of Izu rear‐arc volcanism revealed by drilling at Site U1437, International Ocean Discovery Program Expedition 350

The International Ocean Discovery Program Expedition 350 drilled between two Izu rear‐arc seamount chains at Site U1437 and recovered the first complete succession of rear‐arc rocks. The drilling reached 1806.5 m below seafloor. In situ hyaloclastites, which had erupted before the rear‐arc seamounts came into existence at this site, were recovered in the deepest part of the hole (～15–16 Ma). Here it is found that the composition of the oldest rocks recovered does not have rear‐arc seamount chain geochemical signatures, but instead shows affinities with volcanic front or some of the extensional zone basalts between the present volcanic front and the rear‐arc seamount chains. It is suggested that following the opening of the Shikoku back‐arc Basin, Site U1437 was a volcanic front or a rifting zone just behind the volcanic front, and was followed at ~ 9 Ma by the start of rear‐arc seamount chains volcanism. This geochemical change records variations in the subduction components with time, which might have followed eastward moving of hot fingers in the mantle wedge and deepening of the subducting slab below Site U1437 after the cessation of Shikoku back‐arc Basin opening.     

Numerical analysis on seismic response of Shinkansen bridge-train interaction system under moderate earthquakes

This study is intended to evaluate the influence of dynamic bridge-train interaction (BTI) on the seismic response of the Shinkansen system in Japan under moderate earthquakes. An analytical approach to simulate the seismic response of the BTI system is developed. In this approach, the behavior of the bridge structure is assumed to be within the elastic range under moderate ground motions. A bullet train car model idealized as a sprung-mass system is established. The viaduct is modeled with 3D finite elements. The BTI analysis algorithm is verified by comparing the analytical and experimental results. The seismic analysis is validated through comparison with a general program. Then, the seismic responses of the BTI system are simulated and evaluated. Some useful conclusions are drawn, indicating the importance of a proper consideration of the dynamic BTI in seismic design.