Late Cenozoic volcanic activity in the Chugoku area, southwest Japan arc during back-arc basin opening and reinitiation of subduction

Abstract Temporal–spatial variations in Late Cenozoic volcanic activity in the Chugoku area, southwest Japan, have been examined based on 108 newly obtained K–Ar ages. Lava samples were collected from eight Quaternary volcanic provinces (Daisen, Hiruzen, Yokota, Daikonjima, Sambe, Ooe–Takayama, Abu and Oki) and a Tertiary volcanic cluster (Kibi Province) to cover almost all geological units in the province. Including published age data, a total of 442 Cenozoic radiometric ages are now available. Across‐arc volcanic activity in an area approximately 500 km long and 150 km wide can be examined over 26 million years. The period corresponds to syn‐ and post‐back‐arc basin opening stages of the island arc. Volcanic activity began in the central part of the rear‐arc ca 26 Ma. This was followed by arc‐wide expansion at 20 Ma by eruption at two rear‐arc centers located at the eastern and western ends. Expansion to the fore‐arc occurred between 20 and 12 Ma. This Tertiary volcanic arc was maintained until 4 Ma with predominant alkali basalt centers. The foremost‐arc zone activity ceased at 4 Ma, followed by quiescence over the whole arc between 4 and 3 Ma. Volcanic activity resumed at 3 Ma, covering the entire rear‐arc area, and continued until the present to form a Quaternary volcanic arc. Adakitic dacite first occurred at 1.7 Ma in the middle of the arc, and spread out in the center part of the Quaternary volcanic arc. Alkali basalt activities ceased in the area where adakite volcanism occurred. Fore‐arc expansion of the volcanic arc could be related to the upwelling and expansion of the asthenosphere, which caused opening of the Japan Sea. Narrowing of the volcanic zone could have been caused by progressive Philippine Sea Plate subduction. Deeper penetration could have caused melting of the slab and resulted in adakites. Volcanic history in the Late Cenozoic was probably controlled by the history of evolution of the upper mantle structure, coinciding with back‐arc basin opening and subsequent reinitiation of subduction.     

Displacement properties of landslide masses at the initiation of failure in quick clay deposits and the effects of meteorological and hydrological factors

This study aimed to identify displacement properties of landslide masses at the initiation of failure and factors that affect the landslides activities in areas where quick clay is found. We set up a research site in a quick clay deposit area in Norway and monitored the displacements of landslide masses and meteorological and hydrological factors for a long period of time using an automatic monitoring system. The system collected data for two landslides that occurred at the site from the start of their movement until their ultimate collapse.

The two landslides that were monitored showed definite secondary and tertiary creep stages before they collapsed. One of the landslides moved from the secondary stage to the tertiary creep stage when another landslide occurred nearby. The tertiary stage of this landslide showed reconstruction of short primary, secondary, and tertiary creep stages. These phenomena suggested that (1) the stress at the end of the landslide mass was released during the nearby landslide, and (2) a new stress distribution was formed in the landslide mass. The critical strain differed for 14 times between the two landslide masses we monitored. The difference was likely attributable to the difference in the contents of quick clay, which shows small critical stress against slope failure, as well as topological factors.

Our analyses of the effects of hydrological and meteorological factors on landslides showed that the precipitation of 3 and 10 days before six slope failures as the final stages of the landslides that had occurred in the research area was no different from the mean precipitation of periods that showed no slope failure, suggesting that precipitation had no direct effects on the collapse of the landslide masses. On the other hand, the traveling velocities of the landslide masses during the secondary creep stage, which was prior to their collapse, were affected by the water content of the soil and precipitation (and the amount of snowmelt water), but was little correlated with the pore-water pressure of the quick clay layer. We also found that the presence of snow cover scarcely affected landslide movements.     

Geochemical Process of Gas Hydrate Formation in the Nankai Trough Based on Chloride and Isotopic Anomalies in Interstitial Water

Abstract: Interstitial water expelled from gas hydrate-bearing and -free sediments in the Nankai Trough are analyzed in terms of Cl-, SO₄²-, δ¹⁸O and δD. The baselines for the Cl- concentration and δ¹⁸O value are close to seawater values (530 mM and 0%), indicating that the interstitial water is of seawater origin. The δD values decrease with depth, implying isotopic exchange of hydrogen between upwelling biogenic methane depleted in D and interstitial water. The Cl- concentrations in gas hydrate-bearing sediments are anomalously low, while the δ¹⁸O and δD values are both high, suggesting that the water forming these gas hydrates was poor in Cl- and enriched in ¹⁸O and D during gas hydrate formation. Calculation of the gas hydrate saturations using Cl "and δ¹⁸O anomalies gives results of up to 80 % in sand, and shows that the δ¹⁸O baseline is not consistent with the Cl" baseline. The δ¹⁸O baseline increases by +1% in gas hydrate-free clay and silt. This is considered to be caused by clustering of water molecules after gas hydrate dissociation in response to the upward migration of the base of gas hydrate stability, as indicated by the presence of a double bottom-simulating reflector at this site. The water clusters enriched in ¹⁸O are responsible for the increase in the δ¹⁸O baseline with normal Cl". The abrupt shallowing of the base of gas hydrate stability may induce the dissociation of gas hydrates and the accumulation of gases in the new stability zone, representing a geological process that increases gas hydrate saturation.     

Petrophysical Properties of Natural Gas Hydrates-Bearing Sands and Their Sedimentology in the Nankai Trough

Abstract. The Nankai Trough parallels the Japanese Island, where extensive BSRs have been interpreted from seismic reflection records. High resolution seismic surveys and drilling site-survey wells conducted by the MTI in 1997, 2001 and 2002 have revealed subsurface gas hydrate at a depth of about 290 mbsf (1235 mbsl) in the easternmost part of Nankai Trough. The MITI Nankai Trough wells were drilled in late 1999 and early 2000 to provide physical evidence for the existence of gas hydrate. During field operations, continuous LWD and wire-line well log data were obtained and numerous gas hydrate-bearing cores were recovered. Subsequence sedimentologic and geochemical analyses performed on the cores revealed important geologic controls on the formation and preservation of natural gas hydrate. This knowledge is crucial to predicting the location of other hydrate deposits and their eventual energy resource. Pore-space gas hydrates reside in sandy sediments from 205 to 268 mbsf mostly filling intergranular porosity. Pore waters chloride anomalies, core temperature depression and core observations on visible gas hydrates confirm the presence of pore-space hydrates within moderate to thick sand layers. Gas hydrate-bearing sandy strata typically were 10 cm to a meter thick. Gas hydrate saturations are typically between 60 and 90 % throughout most of the hydrate-dominant sand layers, which are estimated by well log analyses as well as pore water chloride anomalies.
It is necessary for evaluating subfurface fluid dlow behavious to know both porosity and permeability of gas hydrate-bearing sand to evaluate subsurface fluid flow behaviors. Sediment porosities and pore-size distributions were obtained by mercury porosimetry, which indicate that porosities of gas hydrate-bearing sandy strata are approximately 40 %. According to grain size distribution curves, gas hydrate is dominant in fine- to very fine-grained sandy strata.     

Fracture-zone conditions on a recently active fault: insights from mineralogical and geochemical analyses of the Hirabayashi NIED drill core on the Nojima fault, southwest Japan, which ruptured in the 1995 Kobe earthquake

An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H₂O+ and CO₂ had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H₂O+ and CO₂, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H₂O+ and CO₂ were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.     

Configuration of subducting Philippine Sea plate and crustal structure in the central Japan region

A seismic experiment with six explosive sources and 391 seismic stations was conducted in August 2001 in the central Japan region. The crustal velocity structure for the central part of Japan and configuration of the subducting Philippine Sea plate were revealed. A large lateral variation of the thickness of the sedimentary layer was observed, and the P-wave velocity values below the sedimentary layer obtained were 5.3–5.8 km/s. P-wave velocity values for the lower part of upper crust and lower crust were estimated to be 6.0–6.4 and 6.6–6.8 km/s, respectively. The reflected wave from the upper boundary of the subducting Philippine Sea plate was observed on the record sections of several shots. The configuration of the subducting Philippine Sea slab was revealed for depths of 20–35 km. The dip angle of the Philippine Sea plate was estimated to be 26° for a depth range of about 20–26 km. Below this depth, the upper boundary of the subducting Philippine Sea plate is distorted over a depth range of 26–33 km. A large variation of the reflected-wave amplitude with depth along the subducting plate was observed. At a depth of about 20–26 km, the amplitude of the reflected wave is not large, and is explained by the reflected wave at the upper boundary of the subducting oceanic crust. However, the reflected wave from reflection points deeper than 26 km showed a large amplitude that cannot be explained by several reliable velocity models. Some unique seismic structures have to be considered to explain the observed data. Such unique structures will provide important information to know the mechanism of inter-plate earthquakes.     

A Test of Mining Simulations for Phosphorus Adjustment in a Limestone Quarry - Dynamic Programming Compared with a Genetic Algorithm

Limestone quarries where slaked lime is produced for steel makers have been urged to reduce the concentration of phosphorus in their products. In a few quarries in Japan, limestone blocks with low concentrations are blended with limestone blocks with high concentrations to stay below the limit of permitted phosphorus quality. The life of the quarry is extended as long as possible by this blending. Some quarries have a geological database with accurate records of the operations for phosphorus adjustment.However, the combination problem of these blocks typically is addressed by Dynamic Programming; that is, all combinations of possible limestone blocks are examined in the solving process; the combination numbers are so huge that the optimum combination cannot be solved in practical process times. Although it took 8 hours to solve for 600 blocks with a 2GHz high performance personal computer, it would take more than 36 days to approximately solve for 1200 blocks, and 3,378 days are estimated to solve 2,400 blocks. Therefore, a Genetic Algorithm was used to try and work out the optimum combination. First, blocks that can be removed are selected in the quarry and their removal sequence makes the genotype. The Order-base or the Grefenstette method was applied to avoid generating lethal genes in crossover. The fitness value was estimated by the number of products that included less than the permitted concentration of phosphorus.The GA process took less than 3 hours to solve for 1,200 blocks. Because the processing time is almost proportional to the block numbers, this GA method is practical in large quarries. Moreover, this method is easy to apply to other conditions in mining plans, such as environmental protection, noise prevention and eyesore problems. These problems are becoming important factors in quarries near towns in Japan.     

Soft X-Ray and White-Light Coronal Observations of the Post-Flare Arch on 2 November 1991

A giant post-flare arch observed on 2-3 November 1991 was analyzed using the soft X-ray telescope (SXT) on board Yohkoh and the Mark III (MK3) K-coronameter at the High Altitude Observatory/Mauna Loa Solar Observatory. The rising arch was observed in both soft X-ray and K-corona observations. The estimated rising speed from the MK3 observation was approximately 4 km s^-1. A V-shaped depression area was observed on the south side of the giant arch. Change in the K-corona observations was faint while the arch was rising. According to the solar wind observations by the Pioneer Venus Orbiter and the Interplanetary Cometary Explorer, this giant arch event may have been associated with an interplanetary shock.     

The evolution of Pinatubo aerosols in the Arctic stratosphere during 1994–2000

Balloon-borne aerosol measurements were performed with an optical particle counter between 1994 and 2000 at Ny-Ålesund (79°N), Svarbard. Throughout the observation period, continuous decay was found in the concentrations of particles with 0.4–0.6 μm in radius in the Arctic stratosphere, suggesting that Pinatubo aerosols remained even at the end of the 1990s. The decay rate was clearly higher for larger particle sizes, and higher at higher altitude (e-folding time of 970–526 days), suggesting a gravitational sedimentation effect. For smaller particles with R<0.4 μm, slight increases in concentration with time were found, which agreed with the measurements at mid-latitude. The sulfate mass mixing ratio in the Arctic stratosphere before 1998 showed values higher than those at middle latitude, while values were almost the same in both regions after 1998. A possible explanation of the latitudinal difference is a time lag (of 0.5–1 year) in the arrival of Pinatubo aerosols in the Arctic.