Far-infrared properties of metallic dust grains

Far-infrared properties of metallic particle are reinvestigated in detail. In the far-infrared region, absorption due to the eddy current generally dominates over that obtained by using the Rayleigh approximation erroneusly. The wavelength dependence of the eddy current term is examined carefully and shown to be less steep than that predicted by the Rayleigh approximation for dust grains larger than 100 nm in radius. It also depends more sensitively on the grain size. A wider temperature distribution is expected corresponding to a given size distribution and hence the emission spectrum becomes less steep than the preductions by the Rayleigh approximation. Iron and graphite particles are investigated as typical interstellar metallic grains. Effects of coating of dielectric materials are also examined. Comparisons with experimental results and with observations are discussed.     

Northwest Africa 1950: Mineralogy and comparison with Antarctic lherzolitic shergottites

Abstract— NWA 1950 is a new lherzolitic shergottite recently recovered from Morocco and is the first sample of this group found outside Antarctica. Major constituent phases of NWA 1950 are olivine, pyroxenes, and plagioclase glass (“maskelynite”) and the rock shows a two distinct textures: poikilitic and non‐poikilitic typical of lherzolitic shergottites. In poikilitic areas, several‐millimeter‐sized pyroxene oikocrysts enclose cumulus olivine and chromite. In contrast, pyroxenes are much smaller in non‐poikilitic areas, and olivine and plagioclase glass are more abundant. Olivine in non‐poikilitic areas is more Fe‐rich (Fa_29–31) and shows a narrower distribution than that in poikilitic areas (Fa_23–29). Pyroxenes in non‐poikilitic areas are also more Fe‐rich than those in poikilitic areas that show continuous chemical zoning suggesting fractional crystallization under a closed system. These observations indicate that pyroxene in non‐poikilitic areas crystallized from evolved interstitial melts and olivine was re‐equilibrated with such melts. NWA 1950 shows similar mineralogy and petrology to previously known lherzolitic shergottites (ALH 77005, LEW 88516, Y‐793605 and GRV 99027) that are considered to have originated from the same igneous body on Mars. Olivine composition of NWA 1950 is intermediate between those of ALH 77005‐GRV 99027 and those of LEW 88516‐Y‐793605, but is rather similar to ALH 77005 and GRV 99027. The subtle difference of mineral chemistry (especially, olivine composition) can be explained by different degrees of re‐equilibration compared to other lherzolitic shergottites, perhaps due to different location in the same igneous body. Thus, NWA 1950 experienced a high degree of re‐equilibration, similar to ALH 77005 and GRV 99027.     

Upwelling plumes in sagami bay and adjacent water around the Izu Islands,Japan

Water plumes, 20 km long or less, identified by low temperature, high salinity and high nutrient concentrations, were observed on the eastern side of Izu Islands where the Kuroshio Current or its branch flowed eastward. The T-S diagrams and the vertical profiles of oceanographic variables indicated that the water plumes resulted from the upwelling of subsurface water. A newly formed plume, characterized by a sharp temperature front and high nutrient concentrations, contained less chlorophyll than did old plumes. It is suggested that the upwelling plumes are maintained for a period long enough to allow luxuriant growth of phytoplankton.     

Experiment study on RC frame retrofitted by the external structure

A new retrofitting method is proposed herein for reinforced concrete (RC) structures through attachment of an external structure. The external structure consists of a fiber concrete encased steel frame, connection slab and transverse beams. The external structure is connected to the existing structure through a connection slab and transverse beams. Pseudostatic experiments were carried out on one unretrofitted specimen and three retrofitted frame specimens. The characteristics, including failure mode, crack pattern, hysteresis loops behavior, relationship of strain and displacement of the concrete slab, are demonstrated. The results show that the load carrying capacity is obviously increased, and the extension length of the slab and the number of columns within the external frame are important influence factors on the working performance of the existing structure. In addition, the displacement difference between the existing structure and the outer structure was caused mainly by three factors: shear deformation of the slab, extraction of transverse beams, and drift of the conjunction part between the slab and the existing frame. Furthermore, the total deformation determined by the first two factors accounted for approximately 80% of the damage, therefore these factors should be carefully considered in engineering practice to enhance the effects of this new retrofitting method.     

Deep structure of the Nojima Fault, southwest Japan, estimated from borehole observations of fault-zone trapped waves

To estimate the deep structure of the southern part of the Nojima Fault, southwest Japan without the influence of near-surface structures, we analyzed the Love-wave-type fault-zone trapped waves (LTWs) recorded by a borehole seismometer at 1800 m depth. We examined the polarization, dispersion, and dominant frequency of the wavetrain following the direct S-wave in each seismogram to identify the LTW. We selected eight candidates for typical LTWs from 462 records. Because the duration of the LTW increases with hypocentral distance, we infer that the low velocity fault-zone of the Nojima Fault continues towards the seismogenic depth. In addition, since the duration of the LTW increases nonlinearly with hypocentral distance, we infer that the S-wave velocity of the fault-zone increases with depth. The location of events showing the LTW indicates that the fault-zone dips to the southeast at 75° and continues to a depth of approximately 10 km. We assumed a uniform low-velocity waveguide to estimate the average structure of the fault-zone. We estimated the average width, S-wave velocity, and Q_s of the fault-zone by comparing an analytical solution of the LTW with measured data. The average width, S-wave velocity, and Q_s of the fault-zone are 150 to 290 m, 2.5 to 3.2 km/s, and 40 to 90, respectively. Hence the fault-zone structure with a larger width and smaller velocity reduction than the fault-zone model estimated by previous surface observation is more suitable to represent the average fault-zone structure of the Nojima fault. The present study also indicated that the shallow layers and/or a shallow fault-zone structure drastically changes the characteristics of the LTW recorded at the surface, and therefore cause a discrepancy in the fault-zone model between the borehole observation and surface observation.     

A novel index to evaluate discretization methods:A case study of flood susceptibility assessment based on random forest

The selection of a suitable discretization method(DM)to discretize spatially continuous variables(SCVs)is critical in ML-based natural hazard susceptibility assessment.However,few studies start to consider the influence due to the selected DMs and how to efficiently select a suitable DM for each SCV.These issues were well addressed in this study.The information loss rate(ILR),an index based on the informa-tion entropy,seems can be used to select optimal DM for each SCV.However,the ILR fails to show the actual influence of discretization because such index only considers the total amount of information of the discretized variables departing from the original SCV.Facing this issue,we propose an index,infor-mation change rate(ICR),that focuses on the changed amount of information due to the discretization based on each cell,enabling the identification of the optimal DM.We develop a case study with Random Forest(training/testing ratio of 7:3)to assess flood susceptibility in Wanan County,China.The area under the curve-based and susceptibility maps-based approaches were presented to compare the ILR and ICR.The results show the ICR-based optimal DMs are more rational than the ILR-based ones in both cases.Moreover,we observed the ILR values are unnaturally small(＜1％),whereas the ICR values are obviously more in line with general recognition(usually 10％-30％).The above results all demonstrate the superiority of the ICR.We consider this study fills up the existing research gaps,improving the ML-based natural hazard susceptibility assessments.