Effects of elevated pCO2 on reproductive properties of the benthic copepod Tigriopus japonicus and gastropod Babylonia japonica

We investigated the effects of elevated pCO₂ in seawater both on the acute mortality and the reproductive properties of the benthic copepod Tigriopus japonicus and gastropod Babylonia japonica with the purpose of accumulating basic data for assessing potential environmental impacts of sub-sea geological storage of anthropogenic CO₂ in Japan. Acute tests showed that nauplii of T. japonicus have a high tolerance to elevated pCO₂ environments. Full life cycle tests on T. japonicus indicated NOEC = 5800 μatm and LOEC = 37,000 μatm. Adult B. japonica showed remarkable resistance to elevated pCO₂ in the acute tests. Embryonic development of B. japonica showed a NOEC = 1500 μatm and LOEC = 5400 μatm. T. japonicus showed high resistance to elevated pCO₂ throughout the life cycle and B. japonica are rather sensitive during the veliger stage when they started to form their shells.     

Morphological changes in branchial mitochondria-rich cells of the teleost Paralichthys olivaceus as a potential indicator of CO2 impacts

We studied the morphological and biochemical changes of mitochondria-rich cells (MRCs) of a demersal teleost, Paralichthys olivaceus, during exposure to 0.98, 2.97 and 4.95 kPa pCO₂. The apical opening area of MRCs increased 2.2 and 4.1 times by 24 h exposure to 2.97 and 4.95 kPa pCO₂, respectively, while the cross-sectional area or density of MRCs did not change. Gill Na⁺/K⁺-ATPase activity more than doubled at 72 h and then returned to the pre-exposure level at 168 h in 0.98 kPa pCO₂, while it increased 1.7 times at 24 h at 4.95 kPa. These results indicate that the apical opening area of MRCs and the gill Na⁺/K⁺-ATPase activity may be used as an indicator of acute (up to 72 h), but not chronic, impacts of high (>1 kPa) seawater CO₂ conditions in P. olivacues. Limitations of those parameters as indices of CO₂ impacts are discussed.     

Evolution and effect of the stress concentration and rock failure in the deep multi-seam coal mining

Supports crushing accident occasionally occurs in the protected seam exploitation of deep multi-seam coal mining structure and results in adverse effect to the production. To prevent its recurrence in a newly developed working field, a 3D numerical extraction model was built based on the geologic and mining conditions of Jining coal mine to evolve the changes, state and characteristics of the reconstructed vertical and lateral stress in rock interlayer after protective seam exploitation. Stress release and increase zones of this mining structure were separated. Mining-induced localized stress concentration and the interlayer rock failure behavior were explored. The action of concentrated stress on the hydraulic supports in protected seam was discussed upon the major stress redistribution. Using the infinitesimal strain method, a mechanical model was created to further explore, from the vertical and lateral directions, the cause and mechanism of localized stress concentration and rock failure behavior in rock interlayer. The field investigation was finally performed to verify the numerical and mechanical results, and the essential control measures were proposed to prevent this accident. Key findings of this study bring some new insights into the deep multi-seam coal extraction and help to promote a more reliable underground mining.     

Application of frequency ratio,statistical index,and weights-of-evidence models and their comparison in landslide susceptibility mapping in Central Nepal Himalaya

The Mugling–Narayanghat road section falls within the Lesser Himalaya and Siwalik zones of Central Nepal Himalaya and is highly deformed by the presence of numerous faults and folds. Over the years, this road section and its surrounding area have experienced repeated landslide activities. For that reason, landslide susceptibility zonation is essential for roadside slope disaster management and for planning further development activities. The main goal of this study was to investigate the application of the frequency ratio (FR), statistical index (SI), and weights-of-evidence (WoE) approaches for landslide susceptibility mapping of this road section and its surrounding area. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. A landslide inventory map was prepared using earlier reports, aerial photographs interpretation, and multiple field surveys. A total of 438 landslide locations were detected. Out these, 295 (67 %) landslides were randomly selected as training data for the modeling using FR, SI, and WoE models and the remaining 143 (33 %) were used for the validation purposes. The landslide conditioning factors considered for the study area are slope gradient, slope aspect, plan curvature, altitude, stream power index, topographic wetness index, lithology, land use, distance from faults, distance from rivers, and distance from highway. The results were validated using area under the curve (AUC) analysis. From the analysis, it is seen that the FR model with a success rate of 76.8 % and predictive accuracy of 75.4 % performs better than WoE (success rate, 75.6 %; predictive accuracy, 74.9 %) and SI (success rate, 75.5 %; predictive accuracy, 74.6 %) models. Overall, all the models showed almost similar results. The resultant susceptibility maps can be useful for general land use planning.     

A new typhoon bogussing scheme to obtain the possible maximum typhoon and its application for assessment of impacts of the possible maximum storm surges in Ise and Tokyo Bays in Japan

We developed the new typhoon bogussing scheme to obtain the possible maximum typhoon approaching any region under any climatic conditions by using a potential vorticity inversion method. Numerical simulations with the new typhoon bogussing scheme are conducted for assessment of storm surges by possible maximum typhoons under the present-day and global warming climatic conditions in Ise and Tokyo Bays in Japan. The results suggest that the storm tide higher than the maximum storm tide in recorded history can occur in Ise and Tokyo Bays even for the present-day climate and the storm tide higher than the design sea level can cause severe damage to Nagoya and Tokyo megacities, in particular, airport facilities in Ise Bay for the global warming climate. These results suggest that the new typhoon bogussing scheme we developed is useful for assessment of impacts of storm surge by the possible maximum typhoons.     

http://www.sciencedirect.com/science/article/pii/S167498711200148X

The Earth was born from a giant impact at 4.56 Ga. It is generally thought that the Earth subsequently cooled, and hence shrunk, over geologic time. However, if the Earth's convection was double-layered, there must have been a peak of expansion during uni-directional cooling. We computed the expansion-contraction effect using first principles mineral physics data. The result shows a radius about 120 km larger than that of the present Earth immediately after the consolidation of the magma-ocean on the surface, and subsequent shrinkage of about 110 km in radius within about 10 m.y., followed by gradual expansion of 11 km in radius due to radiogenic heating in the lower mantle in spite of cooling in the upper mantle in the Archean. This was due to double-layered convection in the Archean with final collapse of overturn with contraction of about 8 km in radius, presumably by the end of the Archean. Since then, the Earth has gradually cooled down to reduce its radius by around 12 km. Geologic evidence supports the late Archean mantle overturn ca. 2.6 Ga, such as the global distribution of super-liquidus flood basalts on nearly all cratonic fragments (>35 examples). If our inference is correct, the surface environment of the Earth must have undergone extensive volcanism and emergence of local landmasses, because of the thin ocean cover (3–5 km thickness). Global unconformity appeared in cratonic fragments with stromatolite back to 2.9 Ga with a peak at 2.6 Ga. The global magmatism brought extensive crustal melting to yield explosive felsic volcanism to transport volcanic ash into the stratosphere during the catastrophic mantle overturn. This event seems to be recorded by sulfur mass-independent fractionation (SMIF) at 2.6 Ga. During the mantle overturn, a number of mantle plumes penetrated into the upper mantle and caused local upward doming of by ca. 2–3 km which raised local landmasses above sea-level. The consequent increase of atmospheric oxygen enabled life evolution from prokaryotes to eukaryotes by 2.1 Ga, or even earlier in the Earth history.     

Partitioning and lateral transport of iron to the Canada Basin

The concentration of dissolved iron (DFe) and suspended leachable particulate iron (LPFe) in the water column of the western Beaufort Sea were investigated during the late summer of 2010. Elevated concentrations of surface DFe (0.49–1.42 nM) were similar to those reported in resent studies, likely reflecting input from melting sea ice and river discharge. The rapid decrease in DFe (5.20–0.48 nM) and LPFe (88.2–1.83 nM) values observed from inshore to offshore in Pacific influenced waters, suggest scavenging processes limit the input of DFe from the shelf to the deep basin. However, frequent eddies found in this region are likely important in promoting lateral advection, as suggested by higher surface DFe concentrations at an offshore station in the vicinity of a warm-core eddy. Within the Atlantic layer, relatively homogeneous DFe (0.69–0.80 nM) and LPFe (1.18–2.13 nM) concentrations were observed at all the stations, reflecting a balance in the interplay between input and removal processes within this watermass. An input of DFe east of the Lomonosov Ridge was inferred by comparing DFe values within the core of Atlantic water between the Eastern and Western Arctic.     

Experimental and Numerical Investigations of Ground Deformation Using Chemical Grouting for Pipeline Foundation

Based on experimental and numerical investigations, the present paper focuses on under ground scope (UGS) chemical grouting method that can actually improve the pipeline surrounding foundation to solve pipeline saggy damage. According to the experimental results, a solution-type injection material could make lager soil deformation, using less total slurry amount than suspension-type injection material. Therefore, a suspension-type injection material with shorter gel time is more suitable for the UGS method, making it more effective to reinforce the pipeline foundation and restore pipelines. The results of some patterns of injection tests revealed relationship between the behavior of the grouting material and the deformation of the soil. It is found that the material can be injected into a foundation by fracture grouting if the permeation coefficient is lower than 1.00 × 10⁻³ mm/s. The situation was analyzed by using 2-D finite element method analysis software Phase2, and the analysis result proposes that the real data and simulation data are nearly the same in impermeable soil. Furthermore, even if the construction object is permeable soil, it can also be become impermeable soil by two phases grouting: soil improvement grouting and restoration grouting.     

Petrogenesis of the Kaikomagatake granitoid pluton in the Izu Collision Zone, central Japan: implications for transformation of juvenile oceanic arc into mature continental crust

The Miocene Kaikomagatake pluton is one of the Neogene granitoid plutons exposed in the Izu Collision Zone, which is where the juvenile Izu-Bonin oceanic arc is colliding against the mature Honshu arc. The pluton intrudes into the Cretaceous to Paleogene Shimanto accretionary complex of the Honshu arc along the Itoigawa-Shizuoka Tectonic Line, which is the collisional boundary between the two arcs. The pluton consists of hornblende–biotite granodiorite and biotite monzogranite, and has SiO₂ contents of 68–75 wt%. It has high-K series compositions, and its incompatible element abundances are comparable to the average upper continental crust. Major and trace element compositions of the pluton show well-defined chemical trends. The trends can be interpreted with a crystal fractionation model involving the removal of plagioclase, biotite, hornblende, quartz, apatite, and zircon from a potential parent magma with a composition of ~68 wt% SiO₂. The Sr isotopic compositions, together with the partial melting modeling results, suggest that the parent magma is derived by ~53% melting of a hybrid lower crustal source comprising ~30% Shimanto metasedimentary rocks of the Honshu arc and ~70% K-enriched basaltic rocks of the Izu-Bonin rear-arc region. Together with previous studies on the Izu Collision Zone granitoid plutons, the results of this study suggest that the chemical diversity within the parental magmas of the granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the Izu-Bonin arc), as well as a variable contribution of the metasedimentary component in the lower crustal source regions. In addition, the petrogenetic models of the Izu Collision Zone granitoid plutons collectively suggest that the contribution of the metasedimentary component is required to produce granitoid magma with compositions comparable to the average upper continental crust. The Izu Collision Zone plutons provide an exceptional example of the transformation of a juvenile oceanic arc into mature continental crust.