<Emphasis Type="Italic">Landslides</Emphasis>: a review of achievements in the first 5 years (2004–2009)

The international journal Landslides was initiated in April 2004. It is the core project (IPL-C100) of the International Programme on Landslides, a joint initiative of the International Consortium on Landslides and the United Nations and other global organizations. The aims of Landslides are to promote landslide sciences, technology, and capacity building and strengthen global cooperation for landslide risk reduction within the United Nations International Strategy for Disaster Reduction. This paper presents an analysis of the first 5 years of Landslides, the study methods employed, the types and major causes of landslides, the number of different contributors per country, and the “times cited” per issue and most frequently cited papers and briefly discusses some of these. Strategies for future development of the journal involve obtaining input and suggestion from researchers and readers worldwide.     

Spectral reflectance in an urban area a case study for Tokyo

The spectral reflectance of the surface in an urbanized area was estimated through airborne measurements of the spectral upward flux of visible radiation in the range 475–750 nm. Atmospheric effects due to Rayleigh and Mie scattering were accounted for by using optical parameters to solve the radiative transfer equation. The values for these parameters were derived from measurements of the particle number concentration and size distribution.The results clearly show a difference in reflectance between urban and suburban areas. The difference in spectral reflectance decreases from the suburban to the urban area.In a metropolitan area, the surface reflectance generally decreases with urban development, and the global upward flux of visible radiation has a similar tendency. This trend supports the idea of a decrease in reflectance due to the modification of the surface structure.     

Microbial mutualism in leaching of Cu−Ni sulfide concentrate

With tightening legislations on air pollution and decreasing grades of Cu and Ni ores, the mineral processing industry will have to find an alternative to smelting. One such hydrometallurgical alternative is bacterial leaching; it utilizes the action of Thiobacillus ferrooxidans on sulfide minerals converting them to metal sulfates which can be leached by acid produced by the bacteria. The metal is recovered by cementation, solvent extraction or electrowinning. In the present paper, the authors report their test work with a Cu-Ni sulfide concentrate and show that the mutualistic association of T. ferrooxidans with nitrogen-fixing bacteria Beijerinckia lacticogenes helps leach more metal faster in a leaching medium devoid of any added carbon or nitrogen source. Use of intentionally mixed bacterial culture in ore leaching has not been previously reported.     

Detrital zircon geochronology of the Lutzow-Holm Complex,East Antarctica:Implications for Antarctica-Sri Lanka correlation

The Lützow-Holm Complex(LHC) of East Antarctica has been regarded as a collage of Neoarchean(ca.2.5 Ga), Paleoproterozoic(ca. 1.8 Ga), and Neoproterozoic(ca. 1.0 Ga) magmatic arcs which were amalgamated through the latest Neoproterozoic collisional events during the assembly of Gondwana supercontinent. Here, we report new geochronological data on detrital zircons in metasediments associated with the magmatic rocks from the LHC, and compare the age spectra with those in the adjacent terranes for evaluating the tectonic correlation of East Antarctica and Sri Lanka. Cores of detrital zircon grains with high Th/U ratio in eight metasediment samples can be subdivided into two dominant groups:(1) late Meso-to Neoproterozoic(1.1-0.63 Ga) zircons from the northeastern part of the LHC in Prince Olav Coast and northern Soya Coast areas, and(2) dominantly Neoarchean to Paleoproterozoic(2.8-2.4 Ga) zircons from the southwestern part of the LHC in southern Lutzow-Holm Bay area. The ca.1.0 Ga and ca. 2.5 Ga magmatic suites in the LHC could be proximal provenances of the detrital zircons in the northeastern and southwestern LHC, respectively. Subordinate middle to late Mesoproterozoic(1.3-1.2 Ga) detrital zircons obtained from Akarui Point and Langhovde could have been derived from adjacent Gondwana fragments(e.g., Rayner Complex, Eastern Ghats Belt). Meso-to Neoproterozoic domains such as Vijayan and Wanni Complexes of Sri Lanka, the southern Madurai Block of southern India, and the central-western Madagascar could be alternative distal sources of the late Meso-to Neoproterozoic zircons. Paleo-to Mesoarchean domains in India, Africa, and Antarctica might also be distal sources for the minor ~2.8 Ga detrital zircons from Skallevikshalsen. The detrital zircons from the Highland Complex of Sri Lanka show similar Neoarchean to Paleoproterozoic(ca. 2.5 Ga) and Neoproterozoic(ca. 1.0 Ga) ages, which are comparable with those of the LHC, suggesting that the two complexes might have formed under similar tectonic regimes. We consider that the Highland Complex and metasedimentary unit of the LHC formed a unified latest Neoproterozoic suture zone with a large block of northern LH-Vijayan Complex caught up as remnant of the ca. 1.0 Ga magmatic arc.     

Factors Controlling the Fractionation and Seasonal Mobility Variations of Ga and In in Systems Impacted by Acidic Thermal Waters: Effects of Thermodynamics and Bacterial Activity

This work assessed both the fractionation and the seasonal mobility variations of Ga and In in systems impacted by acidic thermal waters. This was accomplished by performing thermodynamic calculations using the PHREEQC algorithm and by assessing the activity of acidophilic iron-oxidizing bacteria. The pH of the Kusatsu thermal waters in Gunma Prefecture, central Japan, is rapidly increased following the addition of a lime suspension. After an abrupt pH increase, under which conditions free ions of Ga and In and their complexes with Cl^? and SO₄^2? exist only in negligible quantities, the majority of dissolved Ga and In is removed by sorption onto suspended hydrous ferric oxides (HFOs). These HFOs are then transported to an artificial lake without significant sedimentation along the river. Subsequently, the suspended HFOs settle out and are added to sediments without significant fractionation between Ga and In. The Tamagawa thermal waters in Akita Prefecture, northeast Japan, are also treated with lime. However, complete neutralization requires mixing with some tributary streams, leading to a gradual downstream increase in pH. Dissolved Ga is, in general, sorbed by HFOs in upstream areas, leading to wide dispersal of Ga across the entire watershed. In comparison, In is transported to the lake inlet predominantly as a Cl^? complex species without significant removal along the river, with the majority being precipitated in an artificial lake, where Cl^? concentrations are too low to form stable complex species with In, and thus, dissolved In is sorbed by HFOs. As a result, In is effectively concentrated within downstream lakebed sediments, whereas Ga is dispersed along the river. Seasonal variations in Ga mobility within the Tamagawa field between snowmelt and low-flow seasons are primarily controlled by pH, because hydrolysis reactions of these metals, which are related to sorption reactions, tend to occur in the upstream regions in the snowmelt season. However, under warmer conditions, HFO formation preferably occurs due to the activity of acidophilic iron-oxidizing bacteria. Thus, under similar pH variations, dissolved Ga is more effectively removed by HFOs during warmer seasons. On the contrary, because HFOs are abundantly formed in low-flow season, even under colder conditions, before In hydrolysis reaction starts to occur, In mobility is less affected by water temperature and then bacterial activity.     

Trends and relationships in victims’ recovery perceptions: a case study of the recovery process following the Great East Japan Earthquake

Natural Hazards - In the aftermath of a disaster, the recovery process has long-term, multi-dimensional, and interactive aspects. To clarify the recovery conditions and victims’ perceptions...     

Style of fluid flow and deformation in and around an ancient out-of-sequence thrust: An example from the Nobeoka Tectonic Line in the Shimanto accretionary complex, Southwest Japan

To understand the characteristics of deformation of an out-of-sequence thrust (OST) and the style of fluid flow along it, we investigated the Nobeoka Tectonic Line, which has been interpreted as a deep OST (7–9 km), in the Shimanto accretionary complex, Southwest Japan. The shear zone in the footwall differs significantly in the along-strike direction not only in thickness, which varied from 100 to 300 m, but also in lithology and mineral vein development. These variations might reflect primarily differences in lithology; that is, the sandstone-dominant shear zone with a large amount of mineral veins precipitated in microcracks is relatively thick, whereas the shale-dominant shear zone with a small amount of veins and with textures indicating highly pressurized pore fluid, is thinner. By comparison with characteristics of a shallow OST (3–5 km), we conclude that the shallow OST has experienced repeated brittle failure with rapid slip and focused fluid flow whereas the deep OST has experienced both brittle and ductile deformation, followed by fluid flow of various styles, depending on the lithology.     

The linear stability of the post-Newtonian triangular equilibrium in the three-body problem

Continuing a work initiated in an earlier publication (Yamada et al. in Phys Rev D 91:124016, 2015), we reexamine the linear stability of the triangular solution in the relativistic three-body problem for general masses by the standard linear algebraic analysis. In this paper, we start with the Einstein–Infeld–Hoffmann form of equations of motion for N-body systems in the uniformly rotating frame. As an extension of the previous work, we consider general perturbations to the equilibrium, i.e., we take account of perturbations orthogonal to the orbital plane, as well as perturbations lying on it. It is found that the orthogonal perturbations depend on each other by the first post-Newtonian (1PN) three-body interactions, though these are independent of the lying ones likewise the Newtonian case. We also show that the orthogonal perturbations do not affect the condition of stability. This is because these do not grow with time, but always precess with two frequency modes, namely, the same with the orbital frequency and the slightly different one due to the 1PN effect. The condition of stability, which is identical to that obtained by the previous work (Yamada et al. 2015) and is valid for the general perturbations, is obtained from the lying perturbations.     

Ab initio investigation into the elasticity of ultrahigh-pressure phases of SiO2

In this study, we report the elastic properties of three ultrahigh-pressure phases of SiO₂: pyrite, cotunnite and Fe₂P types between 300 and 1,500 GPa calculated by means of the density functional ab initio method. It is generally thought that materials tend to be more compact and isotropic with increasing pressure. These three ultrahigh-pressure phases of silica are mechanically stable in the investigated pressure range according to the Born criteria, while the cotunnite and Fe₂P types are unstable at lower pressure. The elastic azimuthal anisotropy of these ultrahigh-pressure phases of silica shows that all the structures counterintuitively have considerable anisotropies even at multimegabar pressures. Among the three investigated structures, the cotunnite type of SiO₂ is the most elastically anisotropic phase due to a soft compression along the b axis combined with a large distortion of the polyhedrons that make the structure. This might also be related to its thermodynamic unfavorability compared to the Fe₂P type under extreme pressure condition. The bond property analyses clearly show that the Si–O bond remains an ionic-covalent mixed bond even at multimegabar pressures with an invariable ionicity with pressure. This argument can explain the monotonously pressure dependence of the elastic anisotropy in the case of pyrite, while the changes in the velocity distribution patterns out of the thermodynamic instability range largely contribute to those of the cotunnite and Fe₂P types.     

X-ray CT based numerical analysis of fracture flow for core samples under various confining pressures

The X-ray CT based numerical analysis of fracture flow for core samples, recently developed by the authors, was applied to two granite core samples having either a mated artificial or a mated natural fracture at confining pressures of 5 to 50 MPa. A third-generation medical X-ray CT scanner was used to image the samples within a core holder consisting of an aluminum liner and a carbon fiber overwrap. Fracture models (i.e., aperture distributions) were obtained by the CT images, the resolution of which was coarser than the apertures, and a single-phase flow simulation was performed using a local cubic law-based fracture flow model. Numerical results were evaluated by a fracture porosity measurement and a solution displacement experiment using NaCl and NaI aqueous solutions. These numerical results coincided only qualitatively with the experimental results, primarily due to image noise from the aluminum liner of the core holder. Nevertheless, the numerical results revealed flow paths within the fractures and their changes with confining pressure, whereas the experimental results did not provide such results. Different stress-dependencies in the flow paths were observed between the two samples despite the similar stress-dependency in fracture porosity and permeability. The changes in total area of the flow paths with confining pressure coincided qualitatively with changes in breakthrough points in the solution displacement experiment. Although the data is limited, the results of the present study suggest the importance of analyzing fluid flows within naturally fractured core samples under in situ conditions in order to better understand the fracture flow characteristics in a specific field. As demonstrated herein, X-ray CT-based numerical analysis is effective for addressing this concern. Using a multi-phase flow model, as well as a core holder constructed of an engineered plastic, should provide a useful, non-destructive, and non-contaminative X-ray CT-based fracture flow analysis for core samples under in situ conditions in future studies.