Determination of Ti, K, Sm and Gd Values in Geological Survey of Japan Reference Materials by Prompt Gamma Neutron Activation Analysis

Prompt gamma neutron activation analysis was applied to the determination of the titanium, potassium, samarium and gadolinium contents of nine Geological Survey of Japan (GSJ) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2). Firstly, the values in JB-1 were determined by the standard addition method: pressed powder disks of JB-1 were used for neutron irradiation and gamma-ray measurements, after known quantities of standard reagents had been added. Secondly, the contents of eight other reference materials were determined by comparison methods using JB-1 as the comparative standard. The precision of analyses were obtained by replicate determinations on these samples. The relative standard deviation was generally less than 5%. For most samples, analysed values agreed well (< 5%) with the recommended values.     

Asperity Height and Aperture of an Artificial Tensile Fracture of Metric Size

Summary  A tensile fracture of about 1 m in length was created by indenting wedges in a block of granite, and the heights of the two fracture surfaces were measured using a large, non-contact surface profile measurement system with a laser profilometer to determine the aperture distribution of the fracture. Based on the measured data, the frequency characteristics of the asperity heights, the initial aperture (the aperture when the surfaces are in contact at a single point), and the size effect on the statistical properties were analyzed. The results can be summarized as follows:

Determination of Chlorine Contents in Geological Survey of Japan Reference Materials by Prompt Gamma Neutron Activation Analysis

We determined chlorine contents in nine GSJ (Geological Survey of Japan) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2) by prompt gamma neutron activation analysis, employing the standard addition method. Pressed powder disks of each reference material were used for neutron irradiation and gammaray measurement, after known quantities (25-200 μl) of sodium chloride solution were added. The influence of the nearby sodium peak overlap was checked, and fluctuations in the chlorine count rate were corrected using silicon as an internal standard. The slopes of calibration lines for seven reference materials (JB-1, 2, 3; JA-1, 2, 3; JR-2) and SiO₂ powders fall within 5% error, and their chlorine values were obtained from the intercepts. Chlorine contents in JB-1 a and JR-1 were also determined by using the calibration lines. Our chlorine values ranged from 26.1 to 934 μg g-¹, which agrees well with the previously reported values.     

Shear behaviour of fractured rock as a function of size and shear displacement

This paper presents laboratory results regarding the shear behaviour of an artificial tensile fracture generated in granite. We used a direct shear rig to test fractures of different sizes (from 100 mm to 200 mm) under various shear displacements up to 20 mm and cyclic shear stresses with constant normal stress of 10 MPa. To determine the evolution of surface damage and aperture during shear, cyclic loading was performed at designated shear displacements. These changes in the surfaces topography were measured with a laser profilometer ‘non-contact surface profile measurement system’. In addition, changes were also measured directly by using pressure-sensitive film.

The results showed that the standard deviation (SD) of the initial aperture of the sheared fracture significantly increases with both shear displacement and size, which result in an increase in the non-linearity of the closure curve (since the matedness of the fracture surfaces decreases with shear displacement). Therefore, we concluded that shear dilation is not only governed by the surfaces sliding over each other, but is also strongly influenced by the non-linearity of closure with shear displacement. Furthermore, while the shear stiffness of the fracture during the initial stage decreases with fracture size, it increases with fracture size in the residual stage. This can be attributed to the fact that only small asperities with short wavelengths were mainly damaged by shearing. Moreover the result showed that the damaged zones enlarge and localise with shear displacement, and eventually tend to form perpendicular to the shear displacement.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Uranium and Thorium Isotope Distribution in an Offshore Bottom Sediment Core of the Selenga Delta, Lake Baikal, Siberia

Distribution of uranium and thorium isotopes in a short sediment core obtained offshore of the Selenga Delta in Lake Baikal, Siberia, was investigated to establish their sedimentary behaviors and to look for a linkage to paleoenvironmental changes. The sediments were composed of dominantly fine detrital materials (70–85%) and a relatively high sedimentation rate (ca. 0.03 cm y⁻¹). The depth profile of ²³⁸U content in bulk sediment samples showed a large variation of 70–123 Bq kg⁻¹, while ²³²Th profile showed a relatively narrow range from 36 to 56 Bq kg⁻¹. The observed ²³⁴U/²³⁸U activity ratios revealed a marked disequilibrium ranging from 1.53 to 1.84 with a mean value of 1.71 ± 0.07, demonstrating the presence of 50–80% authigenic ²³⁸U in the bulk sediments. The distribution of this authigenic ²³⁸U did not display any clear correlation with variations in sediment composition (organic, carbonate, Bio-SiO₂ and mineral contents) including grain size median. The profile of terrigenous ²³⁸U showed a relatively similar pattern to that of ²³²Th. Results of sequential leaching indicate that ²³⁸U in Fe–Mn oxyhydroxides fractions were responsible for the distribution of authigenic ²³⁸U rather than in Bio-SiO₂ fraction. The distribution of authigenic ²³⁸U in the bottom sediments may be explained by the fluctuation of U adsorption capacity on particles including organic matter and Fe–Mn oxyhydroxides before they entered the lake. This study highlights the potential use of authigenic and terrigenous U (Th) signatures in sediments to trace the behavior of U (Th) and to reconstruct environmental (e.g., hydrological) changes in the lake catchment area.     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.