Regional Stress Field and Seismic Dynamics Along the Border Zone Between Fujian, Guangdong and Jiangxi Provinces

The regional stress field and seismic dynamics along the border zone between Fujian, Guangdong and Jiangxi Provinces are studied based on the seismo-geological data, GPS measurement, and seismicity. The results show that: (1) the principal compressional stress of the stress field is oriented in NW-SE direction and the principal extensional stress is in NE-SW direction; (2) the WNW-ward compression and collision of the Philippine Sea Plate to the eastern coast of Taiwan Island are the most direct and most important dynamic source for preparation and occurrence of strong earthquakes in the Taiwan area and along the border zone between Fujian, Guangdong and Jiangxi Provinces.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Statistical performance analysis of seismic‐excited structures with active interaction control

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

浙江桐庐晚奥陶世晚期沉积层序和沉积环境分析

文昌组上段顶部是一套潮汐层理非常发育的泥质砂岩或砂质泥岩,存在双向交错层理,层面有雨痕,应为潮坪沉积。潮坪沉积由小型层序构成,小型层序又是由砂、泥质单层组成。砂质单层底部通常为岩性突变面或侵蚀面,砂质纹层较厚,其中可见对称波痕或泥砾;向上砂质纹层变薄,过渡到泥质单层。砂质单层形成于暴风浪时期,泥质单层是风浪衰减后恢复正常的潮汐沉积。因此,小型层序从成因上说是一风暴层序。碎屑成份、砾石成份分析表明沉积物均来自华夏古陆的沉积岩和变质岩基底。物源一致,岩层产状变化不大,反映文昌组沉积环境稳定。岩性、粒度分析表明文昌组是一向上变细、由浅海高能环境向近岸低能环境过渡的沉积层序。文昌组下段为浅海砂岩沉积,上段顶部为潮坪沉积。二者之间是一套夹砾岩透镜体的泥质粉细砂岩,其沉积环境应介于浅海和滨岸之间,为水下岸坡沉积。砾岩层只是大的沉积旋回中出现的事件性水下冲积物。     

煤岩显微组分热解气相色谱特征与化学结构剖析

煤结构是目前地球化学研究领域中的一个难点，但却具有极其重要的理论及实际意义，本文采用分步热解气相色谱技术将树皮体，镜质体和丝质体分解为分子量较小的可测定的有机化合物，在此基础上，据不同温度下热解产物的组成特征来还原显微组分的化学结构，实验结果表明，煤显微组分主要由四大类官能团组成，一是热稳定性较低的NOS杂原子官能团；二是脂族（脂链、脂环）结构；三是苯、烷基苯（甲苯、二甲苯）、萘等芳香族化合物，四是热稳定性很高的难以分解的稠环芳烃。上述四类化合物集中于显微组分的不同结构简单中，树皮体和镜质体结构单元外侧主要由热稳定性较低的杂原子化合物以及分子量较小的苯和烷基苯组成，而丝质体结构单元外侧则主要以短链脂族结构为主，三组分结构核部由热稳定性很高的难以分解的稠环芳烃组成。连结核部稠环芳烃与结构单元外侧杂原子等官能团的主要是热稳定性较高的脂链结构，煤显微组分热成烃主要按结构中各官能团键的强弱随热演化程度的加深依次脱除，生成油气，基本上属平行独立依次反应机制，亦“官能团脱除型”，此外，还包括少量的长链脂族结构裂解为短链脂肪烃的“解聚”过程。     

赣东北前震旦纪陆内叠加褶皱

江南古陆与华夏古陆拼接带北西侧前震旦纪地层中存在着近东西向褶皱叠加在早期近南北向褶皱上的现象,这是怀玉地块向西拼贴、华夏古陆向北西碰撞拼接过程中构造应力向陆内传递时形成的构造变形系统。叠加褶皱与拼接带具有成生联系,且各自代表了不同构造部位的变形特点。这一构造系统形成于前震旦纪,可能与格林威尔(Grenville)造山运动相当。     

鲁东官山榴辉岩与围岩接触关系的新发现及其对年代学的启示

鲁东官山榴辉岩呈透镜状包于变质含霓石碱性花岗岩中,榴辉岩的片麻理与主岩片麻理总体呈交切关系,局部可见变质含霓石碱性花岗岩呈细小岩枝状脉贯入榴辉岩中。变质含霓石碱性花岗岩锆石U-Pb法下交点年龄为231±25 Ma,上交点年龄为818±66 Ma。发现了闪长玢岩脉斜切式侵入榴辉岩及变质含霓石碱性花岗岩的接触关系,且闪长玢岩脉中有榴辉岩捕虏体,这种现象指示:闪长玢岩侵位时榴辉岩已折返至地壳较浅部位。研究表明,榴辉岩与变质含霓石碱性花岗岩共同经历了新元古代的超高压变质作用,但变质作用发生时含霓石碱性花岗岩可能处于熔融状态,榴辉岩是其中的固相包体。     

苏北榴辉岩中水晶的形成时代及其对超高压变质岩折返的示踪意义

江苏东海水晶以其晶体粒大和产量巨大而闻名，在地质上也因其产于高压超高压变质带而独具特色。在对大别—苏鲁超高压变质带的区域成矿作用进行研究和对中国大陆科学钻探工程(CCSD)主孔岩心进行编录的过程中，认识到超高压带存在着超低压成矿现象，包括中国最主要的水晶矿床成矿带在内的许多矿床都可能是在超高压变质之后退变质结束阶段的超低压环境中形成的，对水晶进行流体包裹体的Rb-Sr等时线年代学研究，获得208Ma的等时线年龄，表明成矿时代为印支期。该年代可视为超高压变质带折返并经历了退变质之后而“稳定”下来的时间。