Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

重金属锌,铅对菲律宾蛤仔的急性毒性试验

本文研究了必需元素Ｚｎ及非必需元素Ｐｂ对菲律宾蛤仔的急性毒性作用，得到Ｚｎ对其的４８ｈＬＤ５０和９６ｈＬＤ５０分别为１４７．９１、１６．４０ｍｇ／ｄｍ＾３；Ｐｂ对其的４８ｈＬＤ５０和９６ｈＬＤ５０分别为３１．６２、１４．２８ｍｇ／ｄｍ＾３。估算得到Ｚｎ、Ｐｂ对菲律宾蛤仔的安全浓度分别为０．８２、０．７１ｍｇ／ｄｍ＾３。     

Carbon disulfide in the estuarine, coastal, and oceanic environments

The concentration of carbon disulfide (CS₂) in surface water and relevant hydrographic parameters were determined in coastal waters of the eastern USA (Delaware Bay and Chesapeake Bay, including the Potomac River; 7–11 September 1986). The CS₂ concentration varied extensively along the cruise track, from 4 to 510 pmol S(CS₂) l⁻¹ (n = 103). The average values in estuarine, shelf, and oceanic waters were found to be 118 ± 100 pmol S(CS₂) l⁻¹ (n = 54), 51 ± 34 pmol S(CS₂) l⁻¹ (n = 14), and 28 ± 12 pmol S(CS₂) l⁻¹ (n = 35), respectively. To help interpret the geochemical behavior of CS₂, we analyzed the depth distribution of CS₂ in the North Atlantic Ocean during an earlier cruise (23 April–2 May 1986). In most cases, these depth profiles show a near-surface maximum at about 10–20 m depth and a relatively steep gradient below this maximum. Based on the distribution pattern in the water column and evidence provided by earlier workers, we propose that diffusion of CS₂ from bottom sediments may contribute to CS₂ levels in surface seawater. The atmospheric concentration of CS₂ was also investigated at some locations during the September cruise. Except during periods when there was a significant anthropogenic input, the concentration of CS₂ in air was generally in the range of 4–15 pptv (parts per trillion by volume) with a mean of 10.4 ± 4.0 pptv (n = 10). The calculated sea-to-air emission rates of CS₂ at each of our sampling stations show a decreasing trend across estuarine, shelf, and oceanic areas, in agreement with the trend in surface water concentrations.     

Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.     

坚强芽孢杆菌对凡纳滨对虾幼体变态的影响

研究比较了坚强芽孢杆菌Bacillus firmusZOU4菌株对数期细胞和孢子在不同加菌量、次数及不同幼体期加菌对凡纳滨对虾Litopenaeus vannam ei幼体无节Ⅲ期到溞状Ⅱ期变态的影响。结果表明,多次加入高数量对数期细胞或孢子对无节Ⅲ期到溞状Ⅱ期幼体变态具有极显著(p<0.01)促进作用,且对数期细胞效果明显高于孢子,溞状Ⅰ期之前比其后加菌效果更显著(p<0.05),但对无节Ⅲ期变态到溞状Ⅰ期影响不明显(p>0.05)。     

南四湖湖内浅槽工程施工对水环境的影响及控制措施

南四湖湖内工程是沂沭泗河洪水东调南下续建工程的单项工程,工程区位于山东省省级自然保护区内;挖泥船施工将对湖内水环境产生一定影响。本文从排泥场回水污染物、生产废水和生活污水三个方面阐述了工程施工对水环境的影响程度,并且提出了相应的控制措施。     

南海北缘东部盆地油气资源研究

南海北缘东部的珠江口盆地及台西南盆地蕴藏着十分丰富的油气资源，根据区域构造背景、盆地发育分布的特点及中、新生代的油气地质条件，结合含油气构造、油气田、油气井的分布规律，利用油气资源评价的理论、方法，对区内的油气资源进行了综合研究，并按照油气资源状况划分出油气富集区、油气潜力区、油气远景区，在此基础上，再进一步划分出4条油气富集带、11条油气潜力带、8条油气远景带，充分显示了该区石油、天然气的分布规律和油气地质特点，为商业性的勘探开发和理论研究奠定了基础。     

Water mass formation variability in the intermediate layer of the east sea

Long-term variability in the intermediate layer of the eastern Japan Basin has been investigated to understand the variability of water mass formation in the East Sea. The simultaneous decrease of temperature at shallower depths and oxygen increasing at deeper depths in the intermediate layer took place in the late 1960’s and the mid-1980’s. Records of winter sea surface temperatures and air temperatures showed that there were cold winters that persisted for several years during those periods. Therefore, it was assumed that a large amount of newly-formed water was supplied to the intermediate layer during those cold winters. Close analysis suggests that the formation of the Upper Portion of Proper Water occurred in the late 1960’s and the Central Water in the mid-1980’s.