陕西小秦岭华阳川韧性剪切带的特征 及其区域构造意义

陕西小秦岭华阳川韧性剪切带发育在新太古界太华群之中,野外调研和显微构造观察结果表明,该韧性剪切带是由构造片岩、眼球状片麻岩组成的深层次韧性剪切带,具有逆冲兼左行走滑的斜冲特征。对韧性剪切带构造片岩黑云母进行^40Ar／^39Ar同位素定年,获得坪年龄为419M±0．6Ma,反等时线年龄为417Ma±0．8Ma。认为华阳川韧性剪切带及其相应的小秦岭区域主导构造变形是发生于419Ma左右的秦岭加里东事件的结果。     

137Cs示踪的渤海湾黄骅港两侧海区的沉积特征

取自黄骅港防波堤两侧海区的7个无扰动柱状沉积物岩心的^137Cs示踪研究显示．该区^137Cs曲线可以分为3种类型：①不连续的^137Cs曲线（表层未检测到^137Cs）,②连续的^137Cs曲线（表层检测到^137Cs）,③未检测到^137Cs的曲线。^137Cs示踪的沉积速率结果显示：①NE向伸展的防砂堤截断原SE向的沿岸流后,造成了黄骅港防波堤两侧近岸差异性现代沉积过程,即堤北侧距岸约4km以内海区现代沉积速为0．69～1．12cm／a,堤南侧距岸约4km处的站位8以内无沉积物沉积;（2）防砂堤南侧的岸外10km、水深约-4m处,存在一个速率高达1．36cm／a的现代沉积中心。上述结果与前人的工作成果对比表明,黄骅港建港前后,现代沉积速率的空间分布特征发生了明显的变化,进一步说明与人类活动密切相关的地质环境变化主导了现在的地质环境变化．应当引起人们的更多重视。     

基于奇异值分解法的含量-面积法对化探异常的确定

地球化学场的数据通常具有分形的特征。应用奇异值分解方法对元素含量数据矩阵进行分解,对奇异值进行分形统计,得到了分形模型。重建元素含量的数据矩阵。然后利用含量-面积的分形方法对重建后的数据矩阵进行分形处理。使用MAPGIS软件进行统计分析,得出研究地区元素的异常下限,做出元素异常分布图,并与该地区已知矿点的分布图进行叠加分析,预测潜在的成矿区。     

姬塬油田长4＋5砂岩储层孔隙类型与成岩作用

通过常规物性、岩石及铸体薄片、重矿物、X射线衍射、扫描电镜等多项测试方法,对鄂尔多斯盆地姬塬油田长4 5含油砂体的岩石学特征、成岩作用、储集类型进行了分析和研究。长4 5储层孔隙主要以粒间孔和长石溶孔为主,粒间溶孔次之,孔隙组合一般以粒间孔和溶孔-粒间孔为主。本区破坏性成岩作用包括机械压实作用、石英及长石的次生加大、碳酸盐胶结作用等,其中压实作用是造成本区砂岩原生孔隙大量丧失的主要原因。建设性成岩作用为溶蚀作用、绿泥石粘土膜形成作用,但溶蚀作用产生的次生孔隙对储层物性的改善不足。     

Pelagic records from the Equatorial Ninetyeast Ridge and significant environmental events during the past 3.5 Ma

This paper presents pelagic records of planktic foraminifera, as well as data of stable isotope stratigraphy and carbonate stratigraphy since 3.5 Ma B.P. from site ODP758 in the Ninetyeast Ridge of the Indian Ocean. Based on these data, manifestations and related mechanisms of major tectonic and environmental events such as the rapid uplift of the Himalaya Mountains, “middle Pleistocene climatic transition” and “mid-Brunhes dissolution event” in the region are discussed. According to the analysis and comparison of various indices and changes in terms of foraminifera assemblage, paleotemperature, paleosalinity and themocline from site ODP758, the authors deduce that the paleoclimatic changes might correlate with the mid-Pleistocene transition at 1.4–1.7 Ma B.P. The changes of CaCO₃, mass accumulation rates (MAR) of CaCO₃ and non- CaCO₃ MAR indicate that the loaded terrigenous sediments increased at 1.7 Ma, which is in agreement with the uplift history of the Qinghai-Tibet plateau as shown by the available data. The last two changes coincide with the uplift of the Qinghai-Tibet plateau, hence they are called “Qinghai-Tibet movement” (1.7 Ma), and the “Kunlun-Yellow River movement” (1.2–0.6 Ma). The changes of the CaCO₃ content, coarse fraction (> 150 μm) content and planktonic foraminifera biostratigraphy show that strong dissolution of abyssal CaCO₃ occurred in the study region during 0.5–0.4 Ma. The event was consistent with the “mid-Brunhes dissolution event” in the sedimentary records of the Atlantic Ocean, Pacific Ocean, Indian Ocean and Nansha sea area of the South China Sea. __________ Translated from Geological Bulletin of China, 2007, 26(12): 1627–1632 [译自: 地质通报]     

光谱快速预选筛分算法研究

利用一组标准正交化的参考向量得到一个可能匹配区域,排除了绝大部分不可能匹配的样本,从而大大提高光谱预选筛分的速度;同时介绍了一种平衡速度与精度的编码替代算法.实验证明:压缩影像的目视效果较好,未产生边缘模糊及条带现象;采用自动目标生成方法(ATGP)从样本集中提取端元并进行光谱角度制图,其效果令人满意.     

焦作-郑州天然气输气管道工程地质灾害防治措施及防治建议

焦作-郑州天然气输气管道是较重要建设项目,输气管道起自焦作市博爱县磨头镇,南止郑州市惠济区古荥镇,该输气管道沿线地质环境条件复杂程度为简单-中等。地质灾害类型主要为崩塌、地裂缝、地面不均匀沉陷,黄土湿陷和沙土液化等地质灾害。工程建设有引发和加剧崩塌灾害的可能性,有遭受地质灾害的危险性。工程建设过程中应针对不同的灾害类型采取适当的预防或治理措施。     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

The propagation of a single shear crack: A displacement discontinuity model

Numerical studies using the displacement discontinuity method show that a single shear crack under compression propagates in its own direction, because such propagation results in the maximum release of strain energy. The methods of linear elastic fracture mechanics may not be used for such a closed crack, and the stress intensity factors are meaningless in that case. Laboratory observations of propagation by means of kinks at an angle of approximately 70° to the crack may be due to heterogeneities, to the effect of a preexisting crack, to end effects, to microcracking, or to some combination of these factors. Such kinks may thus be local phenomena which cannot release most of the strain energy, and are not incompatible with our numerical results which are based on a global energy balance.