Pn arrivals and lateral variations of Moho geometry beneath the Kaapvaal craton

Pn arrivals from mining-induced earthquakes on the edge of the Witwatersrand basin show that the P wavespeeds in the uppermost mantle are almost constant throughout most of the Kaapvaal craton. The presence of only small wavespeed variations allows the use of a simple method of estimating crustal thicknesses below the stations of the Kaapvaal broad-band network using Pn times that has been compared with results from receiver functions. One thousand three hundred thirty-seven Pn arrivals were used to derive crustal thicknesses at 46 stations on the Kaapvaal craton. The average crustal thicknesses for 19 centrally located stations on each of the northern and southern regions of the craton that yielded well-constrained thicknesses were 50.52±0.88 km and 38.07±0.85 km, respectively. In contrast, the corresponding average thicknesses determined from receiver functions were 43.58±0.57 km and 37.58±0.70 km, respectively. The systematically lower values for receiver functions in the northern part of the Kaapvaal craton that was affected by the Bushveld magmatism at 2.05 Ga, suggest that the receiver functions do not enable the petrological crust mantle boundary to be reliably resolved due to variations in composition and metamorphic grade in a mafic lower crust. The Pn times also suggest pervasive azimuthal anisotropy with maximum wavespeeds of about 8.40 km/s at azimuths of about 15° and 217° in the northern and southern regions of the craton, respectively, and minimum wavespeeds of about 8.25 km/s.     

Temperatures of Granulite-facies Metamorphism: Constraints from Experimental Phase Equilibria and Thermobarometry Corrected for Retrograde Exchange

This study assesses temperatures of formation of common granulitesby combining experimental constraints on the P–T stabilityof granulite-facies mineral associations with a garnet–orthopyroxene(Grt–Opx) thermobarometry scheme based on Al-solubilityin Opx, corrected for late Fe–Mg exchange. We appliedthis scheme to 414 granulites of mafic, intermediate and aluminousbulk compositions. Our findings suggest that granulites aremuch hotter than traditionally assumed and that the P–Tconditions of the amphibolite–granulite transition portrayedin current petrology textbooks are significant underestimatesby over 100°C. For aluminous and intermediate granulites,mean corrected temperatures based on our method are 890 ±17 and 841 ± 11°C, respectively (uncertainties reportedas 95% confidence limits on the mean), consistent with minimumtemperatures for orthopyroxene production by fluid-absent partialmelting in these bulk compositions. In contrast, mean temperaturesbased on Grt–Opx Fe–Mg exchange equilibria, usingthe same thermodynamic data, are 732 ± 22 and 723 ±11°C, respectively, well below the minimum temperaturesfor Opx stability. For mafic granulites, the mean correctedtemperature using our method is 816 ± 12°C, similarto the mean temperature of 793 ± 13°C from Fe–Mgexchange. Reasons for the differences between the mafic granulitesand aluminous–intermediate granulites are unclear butmay be due to the lower Al concentrations in Opx in the maficrocks and possible deficiencies in the thermodynamic modellingof these low concentrations. We discuss a number of well-knowngranulite terrains in the context of our findings, includingthe Adirondacks, the Acadian granulites of New England, theincipient charnockites of southern India and Sri Lanka, andthe Kerala Khondalite Belt. Our findings carry implicationsfor thermotectonic models of granulite formation. A computerprogram to perform our thermobarometry calculations, RCLC, isavailable from the Journal of Petrology website at http://www.petrology.oupjournals.orgor from the authors at http://www.geo.ucalgary.ca/~pattison/drm_pattison-rclc.htm. KEY WORDS: granulite-facies metamorphism; thermobarometry; garnet; orthopyroxene     

Coupled Dissolution–Precipitation Reactions of Tennantite–Tetrahedrite Minerals in the Darasun Gold Deposit (Eastern Transbaikalia,Russia)

Geology of Ore Deposits - Heterogeneous rhythmic–zonal aggregates of tennantite-IV partly or completely replacing early homogeneous Zn-tetrahedrite-I grains and euhedral...     

Source and H2O content of high-MgO magmas in island arc settings: an experimental study of a primitive calc-alkaline basalt from St. Vincent, lesser antilles arc

Liquidus phase relationships have been determined for a high-MgO basalt (STV301: MgO=12.5 wt%, Ni=250 ppm, Cr=728 ppm) from Black Point, St Vincent (Lesser Antilles arc). Piston-cylinder experiments were conducted between 7.5 and 20 kbar under both hydrous and oxidizing conditions. AuPd capsules were used as containers. Compositions of supraliquidus glasses and mass-balance calculations show that Fe loss is < 10% in the majority of experiments. Two series of water concentrations in melt were investigated: (i) 1.5 wt% and (ii) 4.5 wt% H₂O, as determined by SIMS analyses on quenched glasses and with the by difference technique. The Fe³⁺/Fe²⁺ partitioning between Cr-Al spinel and melt and olivine-spinel equilibria show that oxidizing fO₂ were imposed (NNO + 1.5 for the 1.5 wt% H₂O series, NNO + 2.3 for the 4.5 wt% H₂O series). For both series of water concentrations, the liquid is multiply-saturated with a spinel lherzolite phase assemblage on its liquidus, at 1235°C, 11.5 kbar (1.5 wt% H₂O) and 1185°C, 16 kbar (4.5 wt% H₂O). Liquidus phases are homogeneous and comparable to typical mantle compositions. Mineral-melt partition coefficients are generally identical to values under anhydrous conditions. The modal proportion cpx/opx on the liquidus decreases from the 1.5 wt% to the 4.5 wt% H₂O series. The experimental data are consistent with STV301 being a product of partial melting of lherzolitic mantle. Conditions of multiple saturation progressively evolve toward lower temperatures and higher pressures with increasing melt H₂O concentration. Phase equilibria constraints, i.e., the necessity of preserving the mantle signature seen in high-MgO and picritic arc basalts, and glass inclusion data suggest that STV301 was extracted relatively dry (∼ 2 wt% H₂O) from its mantle source. However, not all primary arc basalts are extracted under similarly dry conditions because more hydrous melts will crystallize during ascent and will not be present unmodified at the surface. From degrees of melting calculated from experiments on KLB-1, extraction of a 12.5 wt% MgO melt with ∼ 2 wt% H₂O would require a H₂O concentration of 0.3 wt% in the sub-arc mantle. For mantle sources fluxed with a slab-derived hydrous component, extracted melts may contain up to ∼ 5.5 wt% H₂O.     

Geochronological and isotopic records of crustal storage and assimilation in the Wolverine Creek–Conant Creek system,Heise eruptive centre,Snake River Plain

Understanding the processes of differentiation of the Yellowstone–Snake River Plain (YSRP) rhyolites is typically impeded by the apparent lack of erupted intermediate compositions as well as the complex nature of their shallow interaction with the surrounding crust responsible for their typically low O isotopic ratios. A pair of normal-δ¹⁸O rhyolitic eruptions from the Heise eruptive centre in eastern Idaho, the Wolverine Creek Tuff and the Conant Creek Tuff, represent unique magmatic products of the Yellowstone hotspot preserving abundant vestiges of the intermediate differentiation steps leading to rhyolite generation. We address both shallow and deep processes of magma generation and storage in the two units by combining high-precision ID–TIMS U–Pb zircon geochronology, trace element, O and Hf isotopic studies of zircon, and Sr isotopic analyses of individual high-Mg# pyroxenes inherited from lower- to mid-crustal differentiation stages. The zircon geochronology confirms the derivation of both tuffs from the same rhyolitic magma reservoir erupted at 5.5941 ± 0.0097 Ma, preceded by at least 92 ± 14 ky of continuous or intermittent zircon saturation approximating the length of pre-eruptive magma accumulation in the upper crust. Some low-Mg# pyroxenes enclosing zircons predate the eruption by at least 45 ± 27 ky, illustrating the co-crystallisation of major and accessory phases in the near-liquidus rhyolitic melts of the YSRP over a significant period of time. Coeval zircon crystals are isotopically heterogeneous (two populations at εHf ~?5 and ?13), requiring the assembly of isotopically distinct melt pockets directly prior to, or during, the eruption. The primitive Mg# 60–90 pyroxenes are out of isotopic equilibrium with the host rhyolitic melt (⁸⁷Sr/⁸⁶Sr_i = 0.70889), covering a range of ⁸⁷Sr/⁸⁶Sr_i = 0.70705–0.70883 corresponding to ratios typical of the most radiogenic YSRP basalts to the least radiogenic YSRP rhyolites. Together with the low εHf in zircon, the Sr isotopic ratios illustrate limited assimilation dominated by radiogenic Archean crustal source materials incorporated into variably evolved YSRP melts as they progress towards rhyolitic compositions by assimilation–fractional crystallisation.     

Ninetyeast ridge: Magmatism and geodynamics

The study of magmatism and tectonic structure of the East Indian or Ninetyeast Ridge (NER) reveals the geochemical similarity of mantle sources for the NER and Kerguelen Plateau melts. Magmas related to the Kerguelen plume were derived from an enriched mantle source, whereas the NER tholeiitic basalts originated from a source contaminated by a depleted material. While, depleted basalt varieties were not found within the NER basalts. It was shown that magmatic rocks forming the NER were generated by high degrees (30%) of partial melting within the ancient Wharton spreading ridge due to the activity of the Kerguelen plume, which was located at this time in the vicinity of the ridge. The most significant impact of the plume on the NER structures was recorded at 70–50 Ma ago.     

Solubility and migration ability of rhodium in natural conditions: model experimental data

The contents of dissolved rhodium species in the near-neutral environments have been studied for the first time and data on the interaction of Rh with organic matters of natural waters and its sorption behavior during contact with the components of geochemical barriers were obtained. The solubility method was used to analyze the behavior of rhodium hydroxide in the Rh(OH)_x–H₂O and Rh(OH)_x–H₂O–FA (fulvic acids) systems. The possible contents of inorganic species of rhodium and its compounds with humic organic ligands were determined within the pH range typical of surface waters. The solubility of rhodium shows a twoorder- of magnitude increase in the presence of humic matters (FA). The sorption interaction of the soluble rhodium species with the main components of geochemical barriers such as iron oxyhydroxides (III), (including fulvic-acid modified ones), alumosilicates, and precipitates of humic acids in contact with natural waters was studied. It was revealed that rhodium has the high affinity to all studied materials; its species are sorbed by ferrihydrite within several hours. It is suggested that rhodium is mainly transferred as colloid with suspended particulate matters of waters and then is accumulated in bottom sediments. The differences revealed in the sorption behavior of Pt(IV), Pd(II) and Rh(III) may be used to predict the distribution of the considered platinum group elements between the components of ecosystems.     

Paleoclimate changes in the late precambrian: Evidence from the upper precambrian section of the South Urals

The climatic impact on the formation of fine-grained rocks from the Riphean stratotype and Vendian Asha Group on the western slope of the South Urals during the time interval lasting approximately 1200 Ma is considered. It is shown that these rocks are largely represented by “tectonosilicate-dominated” shales. This feature combined with changes in the average K₂O/Al₂O₃ values disavows the hypothesis in (Kennedy et al., 2006), according to which the growth of free oxygen concentration in the Late Riphean and Vendian atmosphere was determined by gradual intensification of the organic carbon extraction from the biosphere by clays. The average values of the hydrolyzate module, chemical index of alteration (CIA), and several lithogeochemical parameters calculated for the Riphean and Vendian clayey rocks provide grounds for the conclusion that intensity of weathering in paleodrainage areas during the accumulation of the Upper Precambrian sedimentary successions was low. The curve reflecting changes of the average CIA values in the Upper Precambrian fine-grained siliciclastic rocks of the South Urals is similar to some extent with the “standard” CIA_correct. curve (GonzalezAlvarez and Kerrich, 2012). It is assumed that changes in microand macrobiotic communities during the Late Precambrian were controlled to a variable extent by climate fluctuations as well. At the same time, these fluctuations most likely left the chemical composition of water in the ocean virtually unchanged, which is evident from analysis of the redox conditions in the ocean and the distribution of primary producers with the average CIA_correct. and CIA values.     

Environmental conditions of the Laptev Sea region in the late postglacial time

The comparison between the first results of comprehensive micropaleontological analysis (pollen, spores, foraminifera, and ostracods) and those of radiocarbon dating (AMS¹⁴C) for the sediments of the eastern inner shelf of the Laptev Sea (the core collected from depth of 37 m) indicates that considerable changes in natural conditions in the sea and on land coincide in time and refer to the time period of 1500–1700 years B.P. This period is characterized by changes in microfossils: appearance of thermophilic pollen and planktonic foraminifera and increase in total number of benthic foraminifera and ostracods. Intense warming and humidification of the climate reconstructed for this 200-year period promoted the expansion of large-shrub tundra. Summer air temperatures were lower than that in the peak mid-Holocene climatic optimum by 2°–3°C, but 1°C higher than the present-day temperature. An estuary freshwater basin developed: it was strongly affected by river discharge, but North Atlantic waters also intensely penetrated here in short-term intervals. In general, the studied microfossil complex reflects the relatively stable environmental conditions and decrease in seawater salinity in the eastern part of the Laptev Sea shelf during the last 2300 years.     

Deposition conditions and distribution features of native gold individuals in the veins of the Tokur mesothermal deposit,Russia

The paper discusses factors in the deposition and concentration of native gold and the spatial distribution of its individuals within the sufide-poor gold–quartz veins at the mesoabyssal Tokur deposit. The major factors in deposition of gold were sealing of the hydrothermal system, a sudden drop in fluid pressure, and repeated immiscibility in the fluid. Native gold was deposited in relation to initial acts of prolonged and discrete opening and preopening of cavities in three mineral assemblages of the productive association II. Most native gold individuals with a visible size of 0.1–1.5 mm were together with the early generation of quartz 2 on cavity walls adjacent to altered rocks. This is caused by the high content of Au complexes in initial hydrothermal solutions favoring rapid oversaturation during cavity formation. Gold fills interstices between grains of quartz 2 throughout the deposit and mineral assemblages. The vertical-flow distribution of gold has been established in economic veins; the upper and middle levels are enriched in gold, and samples with the greatest gold grade of 100–500 g/t or higher are concentrated there. This is caused both by the predominance of mineral association II at these levels and probable natural flotation of gold grains contained in the gold–gas associate for immiscibility of the hydrothermal fluid at the second stage of the ore-forming process.