Impact of subsurface rock fragments on runoff and interrill soil loss from cultivated soils

Field and laboratory studies have indicated that rock fragments in the topsoil may have a large impact on soil properties, soil quality, hydraulic, hydrological and erosion processes. In most studies, the rock fragments investigated still remain visible at the soil surface and only properties of these visible rock fragments are used for predicting runoff and soil loss. However, there are indications that rock fragments completely incorporated in the topsoil could also significantly influence the percolation and water distribution in stony soils and therefore, also infiltration, runoff and soil loss rates. Therefore, in this study interrill laboratory experiments with simulated rainfall for 60 min were conducted to assess the influence of subsurface rock fragments incorporated in a disturbed silt loam soil at different depths below the soil surface (i.e. 0.001, 0.01, 0.05 and 0.10 m), on infiltration, surface runoff and interrill erosion processes for small and large rock fragment sizes (i.e. mean diameter 0.04 and 0.20 m, respectively). Although only small differences in infiltration rate and runoff volume are observed between the soil without rock fragments (control) and the one with subsurface rock fragments, considerable differences in total interrill soil loss are observed between the control treatment and both contrasting rock fragments sizes. This is explained by a rapid increase in soil moisture in the areas above the rock fragments and therefore a decrease in topsoil cohesion compared with the control soil profile. The observed differences in runoff volume and interrill soil loss between the control plots and those with subsurface rock fragments is largest after a cumulative rainfall (P_cum) of 11 mm and progressively decreases with increasing P_cum. The results highlight the impacts and complexity of subsurface rock fragments on the production of runoff volume and soil loss and requires their inclusion in process‐based runoff and erosion models. Copyright © 2011 John Wiley & Sons, Ltd.     

Integration of the life of field seismic data with the reservoir model at the Valhall Field‡

The frequent time‐lapse observations from the life of field seismic system across the Valhall field provide a wealth of information. The responses from the production and injection wells can be observed through time‐shift and amplitude changes. These observations can be compared to modelled synthetic seismic responses from a reservoir simulation model of the Valhall Field. The observed differences between the observations and the modelling are used to update and improve the history match of the reservoir model. The uncertainty of the resulting model is reduced and a more confident prediction of future reservoir performance is provided. A workflow is presented to convert the reservoir model to a synthetic seismic response and compare the results to the observed time‐lapse responses for any time range and area of interest. Correlation based match quality factors are calculated to quantify the visual differences. This match quality factor allows us to quantitatively compare alternative reservoir models to help identify the parameters that best match the seismic observations. Three different case studies are shown where this workflow has helped to reduce the uncertainty range associated with specific reservoir parameters. By updating various reservoir model parameters we have been able to improve the match to the observations and thereby improve the overall reservoir model predictability. The examples show positive results in a range of different reservoir modelling issues, which indicates the flexibility of this workflow and the ability to have an impact in most reservoir modelling challenges.     

Salt diapirs without well defined boundaries – a feasibility study of semi‐automatic detection

Prestack depth imaging of seismic data in complex areas such as salt structures requires extensive velocity model updating. In many cases, salt boundaries can be difficult to identify due to lack of seismic reflectivity. Traditional amplitude based segmentation methods do not properly tackle this problem, resulting in extensive manual editing. This paper presents a selection of seismic attributes that can reveal texture differences between the salt diapirs and the surrounding geology as opposed to amplitude‐sensitive attributes that are used in case of well defined boundaries. The approach consists of first extracting selected texture attributes, then using these attributes to train a classifier to estimate the probability that each pixel in the data set belongs to one of the following classes: near‐horizontal layering, highly‐dipping areas and the inside of the salt that appears more like a low amplitude area with small variations in texture. To find the border between the inside of the salt and the highly‐dipping surroundings, the posterior probability of the class salt is input to a graph‐cut algorithm that produces a smooth, continuous border. An in‐line seismic section and a timeslice from a 3D North Sea data set were employed to test the proposed approach. Comparisons between the automatically segmented salt contours and the corresponding contours as provided by an experienced interpreter showed a high degree of similarity.     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

The domestic divide: Access to the Internet in New Zealand

We use unit records of the 2006 census to show that access to the Internet in the home varies geographically in New Zealand primarily as a result of demographic and socio‐economic differences among individuals. Of particular significance is the much lower rates of domestic access experienced by Māori and Pacific Island individuals even after controlling for differences in their age, gender, education, income, occupation and settlement type. While differences in Internet access by ethnicity has been noted before, it is the magnitude and persistence of this difference in New Zealand after controlling for correlated factors that renders this study unique. Our results have important implications in an education environment increasingly reliant on Web access, but they also raise questions about the extent of access to the Internet outside the home.     

Implications of trace element composition of syntaxial quartz cements for the geochemical conditions during quartz precipitation in sandstones

A petrographic investigation revealed polyphase quartz cementation in the Finefrau Sandstone (Upper Carboniferous, Western Germany) and the Solling Sandstone (Lower Triassic, Central Germany). Three different cements could be distinguished in each sandstone based on their cathodoluminescence and trace element composition. The first quartz generation is suggested to have been formed during eogenesis due to dissolution and replacement of feldspar. The mesogenetic paragenesis comprises two generations of quartz and illite, which are accompanied by albite in the Solling Sandstone. Sharp luminescence zoning in quartz overgrowths points to distinct episodes of cementation in both sandstones. Significant amounts of Al, Li and H and traces of Ge and B have been detected in the quartz overgrowths. The Al‐content of the quartz cements in the Finefrau Sandstones exceeds that in the quartz cements in the Solling Sandstone by a factor of five. It is suggested that this compositional variation reflects the conditions in the pore‐water, such as temperature and pH. The Al‐concentration is generally correlated to the Li‐content with the exception of the latest quartz generation in the Finefrau Sandstones which is also most enriched in trace elements. The ratio of Li/Al varies between 0·11 and 0·25 in the two sandstones. The Li/H‐ratio, which ranges from 0·12 to 0·3, is controlled by the activity ratio of Li and H in the pore fluid. Clay minerals are the most important source for Li and high salinities favour the mobilization of Li during diagenesis. Thus, a relatively low salinity and low pH are responsible for the low Li/H‐ratio in the Finefrau Sandstone, while high salinity and neutral to alkaline pH results in a high Li/H‐ratio for the Solling Sandstone. The Ge‐contents are generally near the average of detrital quartz and indicate that pressure dissolution is a major source for quartz cementation. Different chemical compositions of distinct quartz generations indicate changes in the physico‐chemical conditions and point to mobilization of silica from different sources (for example, pressure solution and clay mineral transformations).     

An empirical model of subcritical bedform migration

The ability to predict bedform migration in rivers is critical for estimating bed material load, yet there is no relation for predicting bedform migration (downstream translation) that covers the full range of conditions under which subcritical bedforms develop. Here, the relation between bedform migration rates and transport stage is explored using a field and several flume data sets. Transport stage is defined as the non‐dimensional Shields stress divided by its value at the threshold for sediment entrainment. Statistically significant positive correlations between both ripple and dune migration rates and transport stage are found. Stratification of the data by the flow depth to grain‐size ratio improved the amount of variability in migration rates that was explained by transport stage to ca 70%. As transport stage increases for a given depth to grain‐size ratio, migration rates increase. For a given transport stage, the migration rate increases as the flow depth to grain‐size ratio gets smaller. In coarser sediment, bedforms move faster than in finer sediment at the same transport stage. Normalization of dune migration rates by the settling velocity of bed sediment partially collapses the data. Given the large amount of variability that arises from combining data sets from different sources, using different equipment, the partial collapse is remarkable and warrants further testing in the laboratory and field.     

Clay mineralogy as a tool for integrated sequence stratigraphic and palaeogeographic reconstructions: Late Oligocene–Early Aquitanian western internal South Iberian Margin,Spain

The different hydrodynamic behaviour of detrital clay minerals in the marine depositional environment allows assessment of relative sea‐level variations in the sedimentary record. Comparison of smectite and kaolinite:illite (S+K:I) changes with the global sea‐level curves and with the third‐order cycles of the eustatic curve for European basins allows assessment of the influence of global eustasy and local tectonics on sequence stratigraphy. In the South Iberian Margin, sedimentation took place both on open‐marine platforms and in deeper water areas. On this margin during the Late Oligocene to Early Aquitanian, the variations in sedimentation were caused not only by global eustasy but also by compressive tectonics. Correlations were made between the S+K:I cycles and the third‐order cycles for European basins, enabling the definition of four third‐order sedimentary sequences (here called C1, C2, C3, and A1) and two lower‐order sequences within C3 and A1 (here called C3a, C3b, A1a, and A1b) related to tectonic movements. High S+K:I values were observed during episodes of maximum flooding in each sequence and lower‐order sequence and in each succession, enabling changes in palaeocoastal morphology to be considered. Copyright © 2012 John Wiley & Sons, Ltd.