河北沧县台拱带中、低温地热资源ORC发电与综合梯级利用

京津冀地热资源梯级综合开发利用(献县)科研基地大地构造位置位于华北平原沧县台拱带之献县断凸,利用其地下蓟县系岩溶裂隙热储层热水开展中低温地热发电与综合梯级利用研究。地热发电装机容量280 kW,采用ORC向心透平膨胀技术,系统工质为R245fa。分别于2018年2月4—6日(冬季)、2018年3月6—16日(春季)进行两次试运行,累计发电时长274h,累计发电量36956kWh,平均发电效率9.1%,最高10.4%。发电效率高于我国已有中低温地热发电项目,在目前国际中低温ORC地热发电项目中处于较高水平。试运行期间发电机组整体运行效果较好且运行稳定,冬季地热发电机组运行效果好于春季。科研基地建设完成后,将进行发电、供暖、地热生态园三级利用,按照90～95/25℃的地热水热能潜力,综合发电供暖两级利用计算能源综合利用率将达70%～76%。     

木质素纤维红黏土强度及变形特性试验研究

利用工业废料改良土体性能不仅具有实用价值而且能够保护环境。采用室内土工试验及SEM试验,针对木质素纤维加筋红黏土的效果,以及木质素纤维掺量对红黏土强度及变形特性的影响规律和作用机理进行研究。试验结果表明:木质素红粘土压缩模量随着纤维掺量的增加先增加后减小,2%纤维掺量时,模量最高;不同木质素掺量红粘土的内摩擦角基本保持不变;红黏土黏聚力随木质素掺量的增加先减小后增大再减小。2%是纤维最优掺量,土体黏聚力出现最大值;在三轴实验中,加筋红黏土试样均发生鼓胀变形,没有明显的破裂面,具有典型的应变硬化特征。研究结果表明木质素纤维能一定程度提高红粘土的强度,提升红粘土的工程应用价值。      

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).     

雄安新区蓟县系雾迷山组岩溶热储特征、主控因素及有利区预测*

雄安新区蓟县系雾迷山组中赋存丰富的地热资源,研究雾迷山组岩溶热储特征及优质储集层发育的主控因素是地热资源勘探的基础。综合运用野外剖面、岩心、薄片、钻井、测井、录井等地质与地球物理资料,对雾迷山组岩溶热储特征和演化过程进行了深入研究,明确了优质储集层形成的控制因素,预测了有利靶区。结果表明,雾迷山组岩溶热储主要岩性为晶粒白云岩、颗粒白云岩、微生物白云岩、硅质白云岩和角砾白云岩等,溶蚀孔洞、裂缝及其组合为主要的储集空间类型。雾迷山组热储平均孔隙度为3.18%,平均渗透率为91.48×10^-3 μm²;其中角砾白云岩物性最好。雾迷山组岩溶热储经历了沉积—准同生期成孔(雾迷山沉积期)、Ⅰ期表生增孔(雾迷山沉积期后至青白口纪前)、Ⅰ期埋藏减孔(青白口纪前至三叠纪)、Ⅱ期表生增孔(三叠纪—古近纪)、Ⅱ期埋藏减孔(新近纪—第四纪)5个阶段,岩性及岩相、成岩作用和构造应力是雾迷山组有利热储形成的主控因素。藻云坪—云坪相、表生岩溶、埋藏溶蚀、准同生岩溶、岩溶高地—斜坡和地层裂缝段比率大于0.4的6项叠合区是研究区最有利的岩溶热储发育区。     

硫氧同位素示踪污染物来源在济南岩溶水中的应用

近年来,济南岩溶水硫酸盐浓度逐年升高,为了对硫酸盐污染区域实施有效的防治措施,保障饮用水安全,识别硫酸盐的污染来源极其重要。在系统分析研究区水文地质条件的基础上,根据实际的采样测试数据,采用硫、氧(S、O)双同位素示踪技术,分析识别了济南趵突泉泉域硫酸盐的主要污染来源,并通过IsoSource质量守恒模型,估算了硫酸盐各污染来源的贡献率。结果表明: 泉域内硫酸盐主要污染来源有大气沉降、污水和土壤; 大气沉降来源贡献率最大,均值达到53.9%; 其次是污水来源,均值为31%; 土壤来源贡献率最小,均值为15.1%。该研究为北方岩溶区地下水硫酸盐来源的定量研究提供了一种新方法,为济南趵突泉泉域硫酸盐污染防治提供了科学依据。     

Wave Slamming on An OWSC Wave Energy Converter in Coupled Wave-Current Conditions with Variable-Depth Seabed

China Ocean Engineering - Coastal wave energy resources have enormous exploitation potential due to shorter weather window, closer installation distance and lower maintenance cost. However, impact...     

A method to Estimate Dynamic Responses of VLFS Based on Multi-Floating-Module Model Connected by Elastic Hinges

China Ocean Engineering - Based on the elastic foundation beam theory and the multi-floating-module hydrodynamic theory, a novel method is proposed to estimate the dynamic responses of VLFS (Very...     

匹配层高频宽带水声换能器研究

为了获取更多的水下信息,提高声呐的探测和识别能力,设计高频宽带换能器是极为重要的。 匹配层技术是拓宽换能器带宽的有效方式。从理论上对匹配层拓宽换能器带宽的机理进行了分析,并利用数值计算和有限元仿真分析了匹配层对换能器性能的影响。结果表明：随着匹配层层数增加,换能器的谐振峰数目增加,峰与峰之间通过耦合能够实现拓宽带宽的效果。通过有限元仿真指导制成中心频率为 187.5 kHz 的双匹配层宽带换能器,其最大发送电压响应为 150.3 dB,–3 dB 带宽为 145 kHz。     

The cumulative characteristics of PAEs in PM2.5 in Changji,Northwest China

ABSTRACT

This paper discusses characteristics of the seasonal variation in phthalate acid esters (PAEs) in the PM_2.5 in the city of Changji, which is located an arid area of Xinjiang Province, northwest China. Samples were collected using a Laoying 2030 median discharge intelligent total suspended particulate (TSP) sampler and analyzed by a Shimadzu GC-2010 gas chromatograph. The results showed that PAEs in PM_2.5 were mainly composed of phthalic acid dibutyl phthalate (DBP) and phthalic acid (2-)ethyl hexyl ester (DEHP). DBP and DEHP are the most commonly used plasticizers, accounting for the majority of plasticizers used, and have large environmental emissions. Compared with the proportions of TSPs, proportions of DBP and DEHP in the PM_2.5 were lower, while the proportions of DMP and DEP were higher. A correlation exists between the distribution of PAEs and the particle size and concentration of atmospheric particulates. Seasonal variations in DBP and DEHP were the same, with lowest concentrations in the summer. Although seasonal variation in DMP was not the same as those of DBP and DEHP, the general trend was similar. Seasonal variation in DEP was different from those of other PAEs. This pattern is related to PAE characteristics and seasonal variations in their sources.     

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.