黄海南部小黄鱼洄游分布及种群结构特征

Monthly fishery survey data of the small yellow croaker Larimichthys polyactis in the southern Yellow Sea from2003 and 2013 were employed to evaluate the variation in the resource distribution and biological characteristics(especially body length and sex ratio) in the population on a decadal scale.The results indicated that the small yellow croaker migrated from the Shawai fishing ground to the Dasha fishing ground in spring and was mainly distributed in the central and western parts of the Dasha fishing ground in April and May.Larimichthys polyactis in the Dasha fishing ground migrated eastward to offshore wintering grounds in autumn and reached the central Dasha fishing ground in October and November.The small yellow croaker entered the western waters of the Shawai fishing ground in winter.A large number of age 0+ fish occurred in the Shawai and Jiangwai fishing grounds in October of 2003 and 2013.The body lengths of the spawning stock and wintering stock in 2013 were larger than those in 2003,and the monthly sex ratios(female to male) were significantly less than 1 in both years.The monthly distribution of this fish in the southern Yellow Sea was consistent with a previous finding that "the stock migrated between the wintering grounds in the west of Jeju Island and the Lüsi spawning grounds" but tended to move more northward,with the spawning grounds extending outward.In the past decade,body length variation experienced a decline after an increase,rather than a steady decrease.The sex ratio in the single-stick stow net showed a tendency to increase over the decade,but was either less than or more than 1 depending on the fishing gear;therefore,further studies should be conducted to determine the sex structure.     

基于船位监控系统的拖网捕捞努力量提取方法研究

为了基于船位监控系统提取拖网捕捞努力量,通过统计航速获得3个峰值,拖网作业在第2个峰值,即1~2.1 m/s,拖网作业航向差一般在–50°~50°。利用航速、航向差阈值设定,把拖网船状态划分为慢速、作业、航行,然后提取出捕捞作业状态点,1 423艘拖网船共提取到处于捕捞状态的点318 433个,合计拖网捕捞时间15 921 h,利用反距离加权插值法生成捕捞强度分布变化趋势图。捕捞努力量在渔业资源研究中是重要的参考值之一,与传统的捕捞努力量计算方法相比,该方法具有实时、大范围、快速、分辨率高的特点,能够用于辅助渔业资源保护。     

南海某导管架海洋平台倒塌分析

针对在役老龄导管架平台进行倒塌计算分析,确定极限承载力进而评估老龄导管架的安全裕度。采用非线性有限元方法,考虑平台的波流载荷及桩-土的非线性相互作用,利用SACS软件建立导管架整体三维有限元计算分析模型,并用逐步加载的方式,对南海某导管架平台进行了全过程非线性倒塌分析。计算分析表明,该导管架平台极限强度很高,具有较大的安全裕度;导管架倒塌过程呈逐步破坏形式,先是撑杆屈服,造成局部结构破坏,然后是钢桩发生屈服,降低结构承载力,最后节点逐步失效,造成结构倒塌。揭示了导管架平台结构失效倒塌的机理,给出了倒塌分析的可行方法和步骤。     

格尔木河流域河水钾硼锂元素分布特征及富集规律

在柴达木格尔木河流域,随着内陆流域水系的产生与地表径流的消亡,从山区至盐湖区钾(K)硼(B)锂(Li)等有益元素的分布可以划分为淋溶-径流区、径流-蒸发区与溶滤-蒸发浓缩富集区3个具有显著特点的水文化学分带。河水中,K、B、Li含量随矿化度升高而升高,且呈正相关关系。在盐湖区,K、B、Li等资源性元素明显富集。研究发现,格尔木河东部主流(秀水河)是格尔木河水中B和Li的主要贡献者。     

Bias estimation and correction for triangle-based surface area calculations

The calculation of surface area is meaningful for a variety of space-filling phenomena, e.g., the packing of plants or animals within an area of land. With Digital Elevation Model (DEM) data we can calculate the surface area by using a continuous surface model, such as by the Triangulated Irregular Network (TIN). However, just as the triangle-based surface area discussed in this paper, the surface area is generally biased because it is a nonlinear mapping about the DEM data which contain measurement errors. To reduce the bias in the surface area, we propose a second-order bias correction by applying nonlinear error propagation to the triangle-based surface area. This process reveals that the random errors in the DEM data result in a bias in the triangle-based surface area while the systematic errors in the DEM data can be reduced by using the height differences. The bias is theoretically given by a probability integral which can be approximated by numerical approaches including the numerical integral and the Monte Carlo method; but these approaches need a theoretical distribution assumption about the DEM measurement errors, and have a very high computational cost. In most cases, we only have variance information on the measurement errors; thus, a bias estimation based on nonlinear error propagation is proposed. Based on the second-order bias estimation proposed, the variance of the surface area can be improved immediately by removing the bias from the original variance estimation. The main results are verified by the Monte Carlo method and by the numerical integral. They show that an unbiased surface area can be obtained by removing the proposed bias estimation from the triangle-based surface area originally calculated from the DEM data.     

内蒙古东乌旗沙麦钨矿床的成矿时代

内蒙古东乌旗沙麦钨矿位于贺根山断裂带以北的兴蒙造山系二连-东乌旗弧盆带内,为岩浆期后高温热液黑钨矿石英脉型矿床。采用黑钨矿Sm-Nd同位素分析获得黑钨矿的形成年龄为137.9±1.7Ma,采用TIMS锆石U-Pb同位素定年获得赋矿黑云母花岗岩的形成年龄为139.1±0.93Ma,据此提出,沙麦钨矿床的形成时代为燕山晚期,这与区域上大兴安岭西坡主要金属矿床的形成年龄数据相吻合。黑钨矿的初始ε_(Nd)值为正值,与中亚造山带内大量花岗岩的εNd值均为正值的特点相一致,表明其来源于亏损地幔源。     

蒙古戈壁阿尔泰巴音陶勒盖地区二长花岗岩LA-ICP-MS锆石U-Pb年龄及其地质意义

蒙古戈壁阿尔泰省巴音陶勒盖地区地处南戈壁-阿尔泰构造带南缘,区内构造活动活跃,中酸性侵入岩比较发育。采用LA-ICP-MS锆石U-Pb测年技术,对区内二长花岗岩中的锆石进行同位素年龄研究。阴极发光图像显示,锆石颗粒多为自形-半自形,且有明显的初始岩浆振荡环带,少见蚀变微区,结合较高的Th/U值(0.65~1.79),断定其为典型的岩浆成因锆石;30颗锆石的~(206)Pb/~(238)U年龄加权平均值为300.2±0.9Ma,显示二长花岗岩成岩时代为晚石炭世,代表了华力西中期的一次构造-岩浆事件,为约束南戈壁-阿尔泰构造带晚石炭世深成岩浆活动时限提供了新证据。     

蒙古科布多省阿拉腾索音博地区辉长岩LA-ICP-MS锆石U-Pb年龄及其地质意义

蒙古科布多省阿拉腾索音博地区地处阿尔泰构造带南缘,由一系列弧盆系及增生杂岩带组成。区内发育一条近东西向辉长岩带,辉长岩15颗锆石分为2类:一类具明显条带韵律环带,一类内部均匀干净,二者均不具核边结构,不含包体,结合高Th/U值(0.46~0.68),确定为典型的基性岩浆锆石;锆石LA-ICP-MS年龄加权平均值为317.6±1.6Ma,厘定其成岩时代为晚石炭世。研究对比表明,该辉长岩带形成于板块俯冲碰撞的尾声阶段,是阿尔泰造山运动大背景下区域基性岩浆活动的产物。     

Preparation of iron phosphate from sludge sourced from the electrocoagulation treatment of source-separated urine

In order to prepare iron phosphate by waste sludge, we report a method for effective utilization of the sludge obtained from the electrocoagulation treatment of source-separated urine. The sludge was dissolved with hydrochloric acid and pretreated with H₂O₂ and Na₃PO₄; finally, NaOH was added to precipitate iron phosphate from the solution. Thermal treatment of the precipitate at 750 °C in air yielded crystalline quartz-like anhydrous FePO₄. The precipitate was characterized by a number of thermal techniques such as thermogravimetry/differential thermal analysis, scanning electron microscopy, and X-ray powder diffraction.     

Autonomic visiting in digital 3D scenes

Human-machine interactive visiting and fixed-route visiting are currently the main roaming modes in digital three-dimensional (3D) scenes. However, in general, when a person visits an attraction area, s/he does not follow a fixed path, but instead wander about according to his/her interests. Here, we propose a new roaming mode, called autonomic visiting. That is, in a digital 3D scene, a user selects several interest spots, then a route connecting these spots can be automatically determined and 3D scene can be seen along this route. This study presents a technical approach that enables the realization of autonomic visiting in 3D scenes. Firstly, Delaunay triangular meshes for the terrain in 3D scene are established. Secondly, a plane-growth algorithm and a line-connection algorithm are introduced to automatically mend the broken parts of these triangular meshes. Thirdly, the triangular meshes are then merged and differently weighted according to different layers. Finally, a progress-zone transmission algorithm is presented to optimal the shortest route, which is derived from A-Star (A*) algorithm. Digital 3D campus of Nanjing University, China, is taken as the experimental materials. The experimental results prove the effect of the proposed approach.