利用GPS观测资料分析2015年尼泊尔MS8.1地震震前及震后形变

通过对尼泊尔MS8.1地震前后附近区域GPS台站记录到的观测数据进行处理,获得了震区以及中国青藏高原地区地震前后GPS站点速度场以及震后形变场。震前速度场显示,喜马拉雅构造带整体呈现出约16 mm/a的压缩特征。同时,震前喜马拉雅构造带根据形变特征可分为东、中、西3段,其地震发生在中段,主要以北向挤压为主,而东西两段分别具有逆时针旋转和顺时针旋转的特征。震后GPS站点形变场显示,此次地震对中国新疆、青海、西藏等地区的影响较大,其最大震后位移达20 mm左右。震后速度场显示,本次地震对尼泊尔地区以及中国藏南地区的构造形变影响较大,主要表现为喜马拉雅构造带的年推挤速度减小,藏南地区的南北向运动速率减小,而东西向速度有增大的现象。这一现象可能对藏南地区的走滑断层有较大影响。     

Bernese�������������̬��λ����

??Bernese??????ж??ο???????????????????????t??????λ??????λ??,??????????13??????????2013\|07\|23??29?????????е??????????GPS??λ????????????????????????λ???????cm??????????λ???????mm??????     

一种签字工作流的定义方法研究

对签字的基本模型进行了总结，并提出一种有足够建模能力、便于用户理解与计算机实现的签字过程定义方法——带条件的链表描述法。     

冕环电流的成因分析

将冕环电流按成因分成三种类型：对流电流、感应电流和自举电流，并分别进行了讨论。将tokamak等离子体中的自举电流的概念引入到冕环中，初步分析表明在部分冕环中也可能产生可观的自举电流。这种电流的存在将对冕环的稳定性将产生重要的影响。     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.     

广州城市空间形态特征与时空演化分析

城市空间形态的形成和变化是城市内、外各种社会力量相互作用的物质空间反映。本文基于历史资料和遥感影像,探讨了近百年来广州城市空间形态特征和演变过程。广州城市空间形态演变依次经历了轮形团块期、触角期、分散组团式、轴向发展期、带形发展期、新的触角期等几个阶段。利用遥感方法对1979～2004年间广州市建成区变化的监测表明,该期间广州先后经历了20世纪80年代的相对稳定期、90年代前期的快速发展期、90年代中后期的平稳发展期和近年来的高速发展期,目前是扩展速度较快的时期。     

基于QSSP的震源破裂过程反演方法

在Qt平台上,基于QSSP软件,利用C⁺⁺进行地震破裂过程反演方法研究。采用按阶段反演的方法,第1阶段反演采用热浴算法进行全局搜索,先按断层区域的构造背景等初始条件对参数范围进行划取,在该范围内随机给定一组初始值开始迭代,使波形初步拟合避开局部最优解;第2阶段反演使用拟牛顿法进行快速收敛,提高波形拟合程度,迭代至目标函数小于误差条件时停止,输出满足误差条件的待解模型参数。为避免模型参数出现病态问题,使用拉普拉斯方程建立平滑矩阵并引入平滑因子对断层模型进行平滑约束。使用棋盘模型验证该方法的稳定性和可靠性。最后,将全国13个台站的重力数据积分后对2013-04-20芦山7.0级地震的破裂过程进行反演,并与其他研究结论进行对比分析。     

多模式控制在关联系统中的应用研究

根据多模式控制器的设计理论,以偏差分段为基础,将控制过程分为几个阶段,用不同的模式加以控制,用加速储能控制来解决响应快速性的要求;用快速放能控制来解决响应平稳性要求;用稳态能量控制来解决系统的准确性要求。把控制模式用于双输入双输出关联系统的解耦系统中进行了仿真研究,与常规控制方法做了比较,多模式控制在关联系统中具有良好的动态响应性能。     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

Time-Domain Full Waveform Inversion Using the Gradient Preconditioning Based on Transmitted Wave Energy

The gradient preconditioning approach based on seismic wave energy can effectively avoid the huge memory consumption of the gradient preconditioning algorithms based on the Hessian matrix. However, the accuracy of this approach is prone to be influenced by the energy of reflected waves. To tackle this problem, the paper proposes a new gradient preconditioning method based on the energy of transmitted waves. The approach scales the gradient through a precondition factor, which is calculated by the ‘approximate transmission wavefield' simulation based on the nonreflecting acoustic wave equation. The method requires no computing nor storing of the Hessian matrix and its inverse matrix. Furthermore, the proposed method can effectively eliminate the effects of geometric spreading and disproportionality in the gradient illumination. The results of model experiments show that the time-domain full waveform inversion(FWI) using the gradient preconditioning based on transmitted wave energy can achieve higher inversion accuracy for deep high-velocity bodies and their underlying strata in comparison with the one using the gradient preconditioning based on seismic wave energy. The field marine seismic data test shows that our proposed method is also highly applicable to the FWI of field marine seismic data.