Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.     

Dhofar 081: A new lunar highland meteorite

Abstract— The lunar meteorite Dhofar 081, found as a single fragment of 174 g in the Dhofar region of Oman, is a shocked feldspathic fragmental highland breccia dominated by anorthosite‐rich lithic and mineral clasts embedded into a fine‐grained mostly shock melted clastic matrix. Major mineral phases in the bulk rock are Ca‐rich plagioclase (An_96.5–99.5), pyroxene (FS_21.9–46.2Wo_3.0–41.4), and olivine (Fa_29.3–47.8); accessory phases include Fe‐Ni metal, ilmenite, and Ti‐Cr‐rich spinel. Dhofar 081 contains subordinate crystalline fragments of large anorthosites, intersertal impact‐melt rocks, microporphyritic impact‐melt breccias, dark fine‐grained impact‐melt breccias, large cataclastic feldspars, and irregularly shaped brown glass clasts. Mafic components are rare and no genuine regolith components were found in the sections studied. Minerals in Dhofar 081 show homogeneously distributed shock features: intergranular recrystallization, strong fracturing and mosaicism in feldspar as well as a high density of mostly irregular fractures in pyroxene and olivine. Localized impact melting caused by one or several impacts led to a strong lithification. Based on these effects an equilibration shock pressure of about 15–20 GPa is estimated for the strongest shock event in Dhofar 081. Devitrification of the “glassy” material in the rock indicates thermal annealing after shock melting suggesting that the 15–20 GPa shock event predated the ejection event. According to the concentrations of implanted solar noble gases Dhofar 081 represents a polymict clastic breccia deposit with possibly a minor regolith component. A similar noble gas record of Dhofar 081 and MacAlpine Hills 88104/05 suggests the possibility of a source crater pairing of both meteorites. As indicated by noble gas measurements pairing of Dhofar 081 with the other lunar meteorites found in Oman, Dhofar 025 and Dhofar 026, is unlikely.     

Cenozoic erosion and the preglacial uplift of the Svalbard–Barents Sea region

The creation of the huge fans observed in the western Barents Sea margin can only be explained by assuming extremely high glacial erosion rates in the Barents Sea area. Glacial processes capable of producing such high erosion rates have been proposed, but require the largest part of the preglacial Barents Sea to be subaerial. To investigate the validity of these proposals we have attempted to reconstruct the western preglacial Barents Sea. Our approach was to combine erosion maps based on prepublished data into a single mean valued erosion map covering the whole western Barents Sea and consequently use it together with a simple Airy isostatic model to obtain a first rough estimate of the preglacial topography and bathymetry of the western Barents Sea margin. The mean valued erosion map presented herein is in good volumetric agreement with the sediments deposited in the western Barents Sea margin areas, and as a direct consequence of the averaging procedures employed in its construction we can safely assume that it is the most reliable erosion map based on the available information. By comparing the preglacial sequences with the glacial sequences in the fans we have concluded that 1/2 to 2/3 of the total Cenozoic erosion was glacial in origin and therefore a rough reconstruction of the preglacial relief of the western Barents Sea could be obtained. The results show a subaerial preglacial Barents Sea. Thus, during interglacials and interstadials the area may have been partly glaciated and intensively eroded up to 1 mm/y, while during relatively brief periods of peak glaciation with grounded ice extending to the shelf edge, sediments have been evacuated and deposited at the margins at high rates. The interplay between erosion and uplift represents a typical chicken and egg problem; initial uplift is followed by intensive glacial erosion, compensated by isostatic uplift, which in turn leads to the maintenance of an elevated, and glaciated, terrain. The information we have on the initial tectonic uplift suggests that the most likely mechanism to cause an uplift of the dimensions and magnitude of the one observed in the Barents Sea is a thermal mechanism.     

Charge distribution on the atmospheric aerosol over the North Atlantic and the Indian Ocean

The distribution of electric charge on the marine aerosol was determined near the sea surface of the Indian Ocean and the North Atlantic during the final stage of the Snellius II-expedition. Mean values for small ion concentrationsn ⁺=455 cm^–3 andn ^–=340 cm^–3 were found over the Atlantic, whilen ⁺=310 andn ^–=250 cm^–3 were the mean values over the Indian Ocean. The ration ⁺/n^– increased from 1.2 to 2.0 with decreasing wind velocity. At wind velocities below 5 m/s 75% of the net space charge near the ocean surface was found to be carried by small ions.     

Diamond in metasedimentary crustal rocks from Pohorje,Eastern Alps: a window to deep continental subduction

We report the first finding of diamond and moissanite in metasedimentary crustal rocks of Pohorje Mountains (Slovenia) in the Austroalpine ultrahigh‐pressure (UHP) metamorphic terrane of the Eastern Alps. Microscopic observations and Raman spectroscopy show that diamond occurs in situ as inclusions in garnet, being heterogeneously distributed. Under the optical microscope, diamond‐bearing inclusions are of cuboidal to rounded shape and of pinkish, yellow to brownish colour. The Raman spectra of the investigated diamond show a sharp, first order peak of sp³‐bonded carbon, in most cases centred between 1332 and 1330 cm^?1, with a full width at half maximum between 3 and 5 cm^?1. Several spectra show Raman bands typical for disordered graphitic (sp²‐bonded) carbon. Detailed observations show that diamond occurs either as a monomineralic, single‐crystal inclusion or it is associated with SiC (moissanite), CO₂ and CH₄ in polyphase inclusions_. This rare record of diamond occurring with moissanite as fluid‐inclusion daughter minerals implies the crystallization of diamond and moissanite from a supercritical fluid at reducing conditions. Thermodynamic modelling suggests that diamond‐bearing gneisses attained P–T conditions of ≥3.5 GPa and 800–850 °C, similar to eclogites and garnet peridotites. We argue that diamond formed when carbonaceous sediment underwent UHP metamorphism at mantle depth exceeding 100 km during continental subduction in the Late Cretaceous (c. 95–92 Ma). The finding of diamond confirms UHP metamorphism in the Pohorje Mountains, the most deeply subducted part of Austroalpine units.     

Preservation conditions and the use of sediment pigments as a tool for recent ecological reconstruction in four Northern European estuaries

Down-core sediment pigment concentrations from four Northern European estuaries were measured using high-performance liquid chromatography (HPLC) to investigate phytoplankton community structure and preservation conditions over the last ca. 100 years where all sites have experienced different levels of eutrophication. Phytoplankton pigments have been shown to be useful biomarkers for phytoplankton community structure and abundance due to their taxonomic specificity. The pigment concentrations and sediment pigment inventory showed large variation between the four sites. Concentrations ranged from more than 6000 nmol/g OC to less than 100 nmol/g OC and the inventory integrated over the top 10 cm from more than 300 nmol/cm² to less than 30 nmol/cm² for total identified pigments. Good pigment preservation in Mariager Fjord (Denmark) reflected the almost permanently anoxic conditions. Pigments in Laajalahti (Finland) showed peak concentrations around the time of highest nitrogen loading events known from historical and modelled records over the past 100 years. In contrast, poor down-core preservation of pigments (especially carotenoids) was observed in the Ems-Dollard (The Netherlands) and Himmerfjärden (Sweden) estuaries. The Ems-Dollard site is an intertidal mudflat that experiences daily exposure to light and air, which enhances pigment degradation. In Himmerfjärden, resuspension is an important process affecting both the sedimentation rate and degradation properties. The different preservation conditions at the four sites were supported by the differences in two degradation indicators; the ratio of pheopigment-a to chlorophyll-a and total carotenoids to total pigments. Class-specific carotenoid pigments represented the dominant algal groups reported from each site, however, no distinct down-core changes in the pigment composition were observed at any of the four sites. This indicated that changes in plankton community structure on the group level have been limited over this time period or masked by low preservation of pigments.     

Correlation between relative ages inferred from 26Al and bulk compositions of ferromagnesian chondrules in least equilibrated ordinary chondrites

Abstract— We have studied the relationship between bulk chemical compositions and relative formation ages inferred from the initial ²⁶Al/²⁷Al ratios for sixteen ferromagnesian chondrules in least equilibrated ordinary chondrites, Semarkona (LL3.0) and Bishunpur (LL3.1). The initial ²⁶Al/²⁷Al ratios of these chondrules were obtained by Kita et al. (2000) and Mostefaoui et al. (2002), corresponding to relative ages from 0.7 ± 0.2 to 2.4 ?0.4/+0.7 Myr after calcium‐aluminum‐rich inclusions (CAIs), by assuming a homogeneous distribution of ²⁶Al in the early solar system. The measured bulk compositions of the chondrules cover the compositional range of ferromagnesian chondrules reported in the literature and, thus, the chondrules in this study are regarded as representatives of ferromagnesian chondrules. The relative ages of the chondrules appear to correlate with bulk abundances of Si and the volatile elements (Na, K, Mn, and Cr), but there seems to exist no correlation of relative ages neither with Fe nor with refractory elements. Younger chondrules tend to be richer in Si and volatile elements. Our result supports the result of Mostefaoui et al. (2002) who suggested that pyroxene‐rich chondrules are younger than olivine‐rich ones. The correlation provides an important constraint on chondrule formation in the early solar system. It is explained by chondrule formation in an open system, where silicon and volatile elements evaporated from chondrule melts during chondrule formation and recondensed as chondrule precursors of the next generation.     

Fault interaction and seismicity: Laboratory investigation and its seismotectonic interpretation

Systems of two parallel linear faults of the same length with the angle of inclination =45° were investigated under uniaxial linearly increasing load. Perspex plates were used as models. For each treated fault configuration the morphology of tensile cracks and the sequence of seismoacoustic events of shear and tensile origin were studied.It is shown that the seismic regime of a fault system is strongly influenced by the contact conditions on a fault plane; it is different in the faults with the aseismic contact, represented by open slits, and in the faults with the seismoactive contact, represented by filled slits, respectively.The experiments proved the dominating role of a fast shear displacement of the stick-slip type in the regime of seismic energy release of a fault system. The tensile crack generation seems to be only of little—if not negligible—importance. On the other hand, the existence of tensile cracks in a fault system can play an important role in the course of subsequent loading cycles because the stick-slip displacements can take place not only along the primary faults but also along the planes of tensile cracks.A comparison of some results of model experiments and the already published results of geological and seismological investigations indicated that the way of seismic energy relase on faults in nature and in the laboratory could be of the same character. Several analogies between the seismic regime of a fault model and of real seismic regions were found concerning the morphology of faults, off-fault fore- and aftershocks, and earthquake doublets, respectively.     

A mapping of the electron localization function for the silica polymorphs: evidence for domains of electron pairs and sites of potential electrophilic attack

The electron localization function, η, evaluated for first-principles geometry optimized model structures generated for quartz and coesite, reveals that the oxide anions are coordinated by two hemispherically shaped η-isosurfaces located along each of the SiO bond vectors comprising the SiOSi angles. With one exception, they are also coordinated by larger banana-shaped isosurfaces oriented perpendicular to the plane centered in the vicinity of the apex of each angle. The hemispherical isosurfaces, ascribed to domains of localized bond-pair electrons, are centered ～0.70 Å along the bond vectors from the oxide anions and the banana-shaped isosurfaces, ascribed to domains of localized nonbonding lone-pair electrons, are centered ～0.60 Å from the apex of the angle. The oxide anion comprising the straight SiOSi angle in coesite is the one exception in that the banana-shaped isosurface is missing; however, it is coordinated by two hemispherically shaped isosurfaces that lie along the bond vectors. In the case of a first-principles model structure generated for stishovite, the oxide anion is coordinated by five hemispherically shaped η-isosurfaces, one located along each of the three SiO bond vectors (ascribed to domains of bonding-electron pairs) that are linked to the anion with the remaining two (ascribed to domains of nonbonding-electron pairs) located on opposite sides of the plane defined by three vectors, each isosurface at a distance of ～0.5 Å from the anion. The distribution of the five isosurfaces is in a one-to-one correspondence with the distribution of the maxima displayed by experimental Δρ and theoretical ??²ρ maps. Isosurface η maps calculated for quartz and the (HO) ₃ SiOSi(OH) ₃ molecule also exhibit maxima that correspond with the (3,?3) maxima displayed by distributions of ??²ρ. Deformation maps observed for the SiOSi bridges for the silica polymorphs and a number of silicates are similar to that calculated for the molecule but, for the majority, the maxima ascribed to lone-pair features are absent. The domains of localized nonbonding-electron pair coordinating the oxide anions of quartz and coesite provide a basis for explaining the flexibility and the wide range of the SiOSi angles exhibited by the silica polymorphs with four-coordinate Si. They also provide a basis for explaining why the SiO bond length in coesite decreases with increasing angle. As found in studies of the interactions of solute molecules with a solvent, a mapping of η-isosurfaces for geometry-optimized silicates is expected to become a powerful tool for deducing potential sites of electrophilic attack and reactivity for Earth materials. The positions of the features ascribed to the lone pairs in coesite correspond with the positions of the H atoms recently reported for an H-doped coesite crystal.     

Future change of climate in South America in the late twenty-first century: intercomparison of scenarios from three regional climate models

Regional climate change projections for the last half of the twenty-first century have been produced for South America, as part of the CREAS (Cenarios REgionalizados de Clima Futuro da America do Sul) regional project. Three regional climate models RCMs (Eta CCS, RegCM3 and HadRM3P) were nested within the HadAM3P global model. The simulations cover a 30-year period representing present climate (1961–1990) and projections for the IPCC A2 high emission scenario for 2071–2100. The focus was on the changes in the mean circulation and surface variables, in particular, surface air temperature and precipitation. There is a consistent pattern of changes in circulation, rainfall and temperatures as depicted by the three models. The HadRM3P shows intensification and a more southward position of the subtropical Pacific high, while a pattern of intensification/weakening during summer/winter is projected by the Eta CCS/RegCM3. There is a tendency for a weakening of the subtropical westerly jet from the Eta CCS and HadRM3P, consistent with other studies. There are indications that regions such of Northeast Brazil and central-eastern and southern Amazonia may experience rainfall deficiency in the future, while the Northwest coast of Peru-Ecuador and northern Argentina may experience rainfall excesses in a warmer future, and these changes may vary with the seasons. The three models show warming in the A2 scenario stronger in the tropical region, especially in the 5°N–15°S band, both in summer and especially in winter, reaching up to 6–8°C warmer than in the present. In southern South America, the warming in summer varies between 2 and 4°C and in winter between 3 and 5°C in the same region from the 3 models. These changes are consistent with changes in low level circulation from the models, and they are comparable with changes in rainfall and temperature extremes reported elsewhere. In summary, some aspects of projected future climate change are quite robust across this set of model runs for some regions, as the Northwest coast of Peru-Ecuador, northern Argentina, Eastern Amazonia and Northeast Brazil, whereas for other regions they are less robust as in Pantanal region of West Central and southeastern Brazil.