A Quantitative Model of Energy Release and Heating by Time-dependent,Localized Reconnection in a Flare with Thermal Loop-top X-ray Source

We present a quantitative model of the magnetic energy stored and then released through magnetic reconnection for a flare on 26 February 2004. This flare, well observed by RHESSI and TRACE, shows evidence of non-thermal electrons for only a brief, early phase. Throughout the main period of energy release there is a super-hot (T?30 MK) plasma emitting thermal bremsstrahlung atop the flare loops. Our model describes the heating and compression of such a source by localized, transient magnetic reconnection. It is a three-dimensional generalization of the Petschek model, whereby Alfvén-speed retraction following reconnection drives supersonic inflows parallel to the field lines, which form shocks: heating, compressing, and confining a loop-top plasma plug. The confining inflows provide longer life than a freely expanding or conductively cooling plasma of similar size and temperature. Superposition of successive transient episodes of localized reconnection across a current sheet produces an apparently persistent, localized source of high-temperature emission. The temperature of the source decreases smoothly on a time scale consistent with observations, far longer than the cooling time of a single plug. Built from a disordered collection of small plugs, the source need not have the coherent jet-like structure predicted by steady-state reconnection models. This new model predicts temperatures and emission measure consistent with the observations of 26 February 2004. Furthermore, the total energy released by the flare is found to be roughly consistent with that predicted by the model. Only a small fraction of the energy released appears in the super-hot source at any one time, but roughly a quarter of the flare energy is thermalized by the reconnection shocks over the course of the flare. All energy is presumed to ultimately appear in the lower-temperature (T?20 MK) post-flare loops. The number, size, and early appearance of these loops in TRACE’s 171 Å band are consistent with the type of transient reconnection assumed in the model.     

Spatial and temporal variations of solar coronal loops

Skylab EUV observations of an active region near the solar limb were analyzed. Both cool (T < 10⁶ K) and hot (T > 10⁶ K) loops were observed in this region. For the hot loops the observed intensity variations were small, typically a few percent over a period of 30 min. The cool loops exhibited stronger variations, sometimes appearing and disappearing in 5 to 10 min. Most of the cool material observed in the loops appeared to be caused by the downward flow of coronal rain and by the upward ejection of chromospheric material in surges. The frequent EUV brightenings observed near the loop footpoints appear to have been produced by both in situ transient energy releases (e.g. subflares) and the infall/impact of coronal rain. The physical conditions in the loops (temperatures, densities, radiative and conducting cooling rates, cooling times) were determined. The mean energy required to balance the radiative and conductive cooling of the hot loops is approximately 3 × 10^–3 erg cm^–3 s^–1. One coronal heating mechanism that can account for the observed behavior of the EUV emission from McMath region 12634 is heating by the dissipation of fast mode MHD waves.     

Development and application of a distributed catchment-scale hydrological model for the River Ythan,NE Scotland

Mathematical models are being used to develop a decision support system for integrated management of the Ythan catchment in NE Scotland. One component of this has involved the development of a distributed catchment-scale hydrological model. The model is based on subsurface flow routing and calculates the contribution to stream flow from each 50 m×50 m cell in the 548 km² catchment. It uses two topographic parameters, slope and distance to stream following the main line of flow, and five physical parameters. The topographic analysis and distributed flow accumulation are performed by linking the single cell model with a geographic information system. Preliminary results from a three-year simulation of daily flows indicate that the model successfully predicts the main characteristics of the catchment flow. © 1998 John Wiley & Sons, Ltd.     

Model prediction of the most effective frequency for the large-scale modification of the midlatitude ionospheric <Emphasis Type="Italic">F</Emphasis><Subscript>2</Subscript> layer by powerful HF radiowaves

The response of the midlatitude F ₂ layer to the effect of powerful HF radiowaves is studied using the numerical model of the ionosphere. The large-scale modification of the F ₂ layer over the Sura heating facility near Nizhni Novgorod is considered for autumnal conditions. The calculations are performed for various cases when the heating wave has different frequencies under the daytime and nighttime conditions. The calculation results show that large-scale changes in the electron temperature and density in the F ₂ layer caused by the artificial heating should substantially depend on the heating radiowave frequency. It is found that there should exist such, most effective, heating wave frequency at which a decrease in the electron density at the F ₂ layer maximum height over the heating facility should be maximal.     

The Potential of Eleocharis acicularis for Phytoremediation: Case Study at an Abandoned Mine Site

Phytoremediation, a plant‐based and cost‐effective technology for the cleanup of contaminated soil and water, is receiving increasing attention. In this study, the aquatic macrophyte Eleocharis acicularis was examined for its ability to take up multiple heavy metals and its potential application for phytoremediation at an abandoned mining area in Hokkaido, Japan. Elemental concentrations were measured in samples of E. acicularis, water, and soil collected from areas of mine tailing and drainage. The results reveal that Pb, Fe, Cr, Cu, Ni, and Mn accumulation in the plants increased over the course of the experiment, exceeding their initial concentrations by factors of 930, 430, 60, 25, 10, and 6, respectively. The highest concentrations of Fe, Pb, Zn, Mn, Cr, Cu, and Ni within the plants were 59500, 1120, 964, 388, 265, 235, and 47.4 mg/kg dry wt., respectively, for plants growing in mine drainage after 11 months of the experiment. These results indicate that E. acicularis is a hyperaccumulator of Pb. We also found high Si concentrations in E. acicularis (2.08%). It is likely that heavy metals exist in opal‐A within cells of the plant. The bioconcentration factors (BCF: ratio of metal concentration in the plant shoots to that in the soil) obtained for Cr, Cu, Zn, Ni, Mn, and Pb were 3.27, 1.65, 1.29, 1.26, 1.11, and 0.82, respectively. The existence of heavy metals as sulphides is thought to have restricted the metal‐uptake efficiency of E. acicularis at the mine site. The results of this study indicate that E. acicularis shows great potential in the phytoremediation of mine tailing and drainage rich in heavy metals.     

The ECOMAN project: A novel approach to defining sustainable ecosystem function

The ECOMAN was initiated in 2001 by the University of Plymouth, UK, Plymouth Marine Laboratory and the Department of the Environment, Fisheries and Rural Affairs (DEFRA) to address the need for more pragmatic assessment techniques linking environmental degradation with its causes. The primary aim of the project was to develop an evidence-based approach in which suites of easy-to-use, cost-effective and environmentally valid biological responses (biomarkers) could be used together to assess the health of coastal systems through the general condition of individuals. A range of sub-lethal endpoints, chosen to reflect successive levels of biological organisation (molecular, cellular, physiological), was evaluated in common coastal organisms showing different feeding types (filter feeding, grazing, predation) and habitat requirements (estuary, rocky shore). Initially, the suite of biomarkers was used in laboratory studies to determine the relative sensitivities of key species within different functional groups to common contaminants. These results were then validated in field studies performed in a range of ecosystems exhibiting different degrees/signatures of contamination. Here, an example is provided of a field study in the Humber Estuary, UK, which illustrates how multivariate statistical analysis can be used to identify patterns of response to discriminate between contaminated and clean sites. The use of a holistic, integrated approach of this kind is advocated as a practical means of assessing the impact of chemical contamination on organismal health and of ranking the status of marine ecosystems.     

Fluid–mineral reactions and melting of orthopyroxene–cordierite–biotite gneiss in the presence of H<Subscript>2</Subscript>O-CO<Subscript>2</Subscript>-NaCl and H<Subscript>2</Subscript>O-CO<Subscript>2</Subscript>-KCl fluids under parameters of granulite-facies metamorphism

Reactions and partial melting of peraluminous rocks in the presence of H₂O-CO₂–salt fluids under parameters of granulite-facies metamorphism were modeled in experiments on interaction between orthopyroxene–cordierite–biotite–plagioclase–quartz metapelite with H₂O, H₂O-CO₂, H₂O-CO₂-NaCl, and H₂O-CO₂-KCl fluids at 600 MPa and 850°C. Rock melting in the presence of H₂O and equimolar H₂O-CO₂ fluids generates peraluminous (A/CNK¹ > 1.1) melts whose composition corresponds to magnesian calcic or calc–alkaline S-type granitoids. The melts are associated with peritectic phases: magnesian spinel and orthopyroxene containing up to 9 wt % Al₂O₃. In the presence of H₂O-CO₂-NaCl fluid, cordierite and orthopyroxene are replaced by the association of K-Na biotite, Na-bearing gedrite, spinel, and albite. The Na₂O concentrations in the biotite and gedrite are functions of the NaCl concentrations in the starting fluid. Fluids of the composition H₂O-CO₂-KCl induce cordierite replacement by biotite with corundum and spinel and by these phases in association with potassium feldspar at X _KCl = 0.02 in the fluid. When replaced by these phases, cordierite is excluded from the melting reactions, and the overall melting of the metapelite is controlled by peritectic reactions of biotite and orthopyroxene with plagioclase and quartz. These reactions produce such minerals atypical of metapelites as Ca-Na amphibole and clinopyroxene. The compositions of melts derived in the presence of salt-bearing fluids are shifted toward the region with A/CNK < 1.1, as is typical of so-called peraluminous granites of type I. An increase in the concentrations of salts in the fluids leads to depletion of the melts in Al₂O₃ and CaO and enrichment in alkalis. These relations suggest that the protoliths of I-type peraluminous granites might have been metapelites that were melted when interacting with H₂O-CO₂-salt fluids. The compositions of the melts can evolve from those with A/CNK > 1.1 (typical of S-type granites) toward those with A/CNK = 1.0–1.1 in response to an increase in the concentrations of alkali salts in the fluids within a few mole percent. Our experiments demonstrate that the origin of new mineral assemblages in metapelite in equilibrium with H₂O-CO₂-salt fluids is controlled by the activities of alkaline components, while the H₂O and CO₂ activities play subordinate roles. This conclusion is consistent with the results obtained by simulating metapelite mineral assemblages by Gibbs free energy minimization (using the PERPE_X software), as shown in log(\({a_{{H_2}O}}\))–log(\({a_{N{a_2}O}}\)) and log(\({a_{{H_2}O}}\))–log(\({a_{{K_2}O}}\)) diagrams.     

Powder factors in asymmetric blast patterns

A cell powder factor defines the local powder factor in a simple geometric procedure that accounts for the charge in each blast hole and the triangulation formed by blast hole collars in a blast pattern. In the case of asymmetric blast patterns, the cell powder factor deviates from the global powder factor. Poor drilling of blast hole collars produces significant variation in the cell powder factor, more so, than does poor blast hole charging. The cell powder factor does not account for timing within a blast and does not easily handle non-parallel blast hole configurations. The cell powder factor is best used as a design or audit tool before blast holes are loaded. It gives the opportunity to correct for poor drilling and/or poor charging practices prior to firing a blast.     

Types of sedimentary environment in alluvial sediments distinguished on the basis of its chemical constitution: the example of the lower course of the Obra river (Western Poland)

Research concerning chemical constitution of alluvial sediments was done in the lower course of the Obra river (Western Poland). The fragment of vertical profile, which consisted of various alluvial sediments (fine sands, peats, and sandy silts) was chosen for detailed analysis. The main research problem was to determine if lithology and chemical constitution of alluvial deposits are interconnected in a distinct way within studied section of the Obra river valley, and, if changes of chemical elements’ concentration could be used to illustrate depositional processes, which take place in riverbed and floodplain. Concentrations of Fe, Mn, Cu, Zn, Ca, Mg, and K were determined in collected sediment samples. Next, geochemical groups of alluvial sediments were distinguished using cluster analysis. Investigated changes of chemical elements’ concentration show that there is a distinct border between the environment of organic sediments, which marks the place of former functioning of the Obra riverbed, and sandy silts, which were deposited within floodplain during floods. Besides, floodplain sediments, riverbed sediments, and reductive environment within peat deposits were singled out on the basis of the analysis.     

Hypsometric analysis of Shakkar river catchment through geographical information system

Hypsometric analysis of watershed (area-elevation analysis) has generally been used to reveal the stages of geomorphic development (stabilized, mature and young). The geologic stages of development and proneness of the watersheds for erosion are quantified by hypsometric integral. The estimation of hypsometric integral is carried out from the graphical plot of the measured contour elevation and encompassed area by using empirical formulae. In this study, efforts were made to estimate the hypsometric integral values of Shakkar river watershed which is a tributary of Narmada river located in Madhya Pradesh. The watershed was delineated into eight sub-watersheds and hypsometric analysis was carried out for all of them using digital contour maps, which was generated using Arc/Info GIS. The hypsometric integral values for all the sub-watersheds of Shakkar river ranges between 0.47 and 0.51. In the study area, only mature stage of erosion cycle is identified.