An Attempt to Predict the Failure Time of Abandoned Mine Pillars

Summary  Left in place pillars of abandoned mines are subject to weathering (e.g action of water, bacteria) that degrades their mechanical strength and eventually leads to collapse. A simple weathering model is proposed, that is governed by two parameters: the rate of progression of weathered front and the rate of degradation of the compressive strength with time. Both plane strain and axisymmetric analyses are performed and closed form solutions of the variation with time of the bearing capacity of the pillar are given. Experimental data of the tests conducted on gypsum and anhydrite specimens attacked by water are presented. It is shown that in order to fit the experimental data a third parameter must be introduced. New closed form solutions are given and the data are used for estimating the time to failure of abandoned gypsum mines in Northern Italy. Authors’ address: Dr. Riccardo Castellanza, Research Assistant, Department of Structural Engineering, Milan University of Technology (Politecnico), Piazza Leonardo da Vinci 32, 20133 Milan, Italy     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Spatial Variability of Rock Depth in Bangalore Using Geostatistical, Neural Network and Support Vector Machine Models

Geospatial technology is increasing in demand for many applications in geosciences. Spatial variability of the bed/hard rock is vital for many applications in geotechnical and earthquake engineering problems such as design of deep foundations, site amplification, ground response studies, liquefaction, microzonation etc. In this paper, reduced level of rock at Bangalore, India is arrived from the 652 boreholes data in the area covering 220 km². In the context of prediction of reduced level of rock in the subsurface of Bangalore and to study the spatial variability of the rock depth, Geostatistical model based on Ordinary Kriging technique, Artificial Neural Network (ANN) and Support Vector Machine (SVM) models have been developed. In Ordinary Kriging, the knowledge of the semi-variogram of the reduced level of rock from 652 points in Bangalore is used to predict the reduced level of rock at any point in the subsurface of the Bangalore, where field measurements are not available. A new type of cross-validation analysis developed proves the robustness of the Ordinary Kriging model. ANN model based on multi layer perceptrons (MLPs) that are trained with Levenberg–Marquardt backpropagation algorithm has been adopted to train the model with 90% of the data available. The SVM is a novel type of learning machine based on statistical learning theory, uses regression technique by introducing loss function has been used to predict the reduced level of rock from a large set of data. In this study, a comparative study of three numerical models to predict reduced level of rock has been presented and discussed.     

Zur Ermittlung der bestanschmiegenden Ebene zu einer Anzahl von,aus Erdbeben bestimmten Richtungen

Zusammenfassung Es werden mit Hilfe der sphärischen Trigonometrie und der Ausgleichsrechnung Methoden angegeben, die die Berechnung der bestanschmiegenden Ebene an eine Anzahl von Geraden mit einem gemeinsamen Punkt ermöglichen.

---

Summary With the aid of the spherical trigonometry and the adjustment, methods are given to determin the best-fitting plane for a given set of directions through a common point.

     

An ocean-bottom hydrophone recorder for seismic refraction experiments

A new and inexpensive pop-up ocean-bottom hydrophone recorder has been developed for use in seismic refraction experiments. It is capable of operating in water depths of up to 4000 m and in very rugged topography, and uses an acoustic command system built by the U.K. Institute of Oceanographic Sciences for recovery. The instrument is mounted in an inexpensive cylindrical pressure case based on commercially available extruded aluminium alloy tubing, and uses glass spheres and syntactic foam for buoyancy. Hydrophone and clock signals are frequency modulated and recorded on tape cassettes, with a recording duration of three hours allowing up to 18 programmed shot windows. The prototype has made seven free descents on the Mid-Atlantic ridge and in the Gulf of Oman, and successfully recorded shots under operational conditions for the first time in September 1979. The total component cost of the prototype was £2740 (1979 prices).(Department of Earth Sciences, University of Cambridge Contribution No. ES135).     

Spatial variability in the primary productivity in the East China Sea and its adjacent waters

Primary productivity in the East China Sea and its adjacent area was measured by the¹³C tracer method during winter, summer and fall in 1993 and 1994. The depth-integrated primary productivity in the Kuroshio Current ranged from 220 to 350 mgC m⁻²d⁻¹, and showed little seasonal variability. High primary productivity (above 570 mgC m⁻²d⁻¹) was measured at the center of the continental shelf throughout the observation period. The productivity at the station nearest to the Changjiang estuary exhibited a distinctive seasonal change from 68 to 1,500 mgC m⁻²d⁻¹. Depth-integrated primary productivity was 2.7 times higher in the shelf area than the rates at the Kuroshio Current. High chlorophyll-a specific productivity (mgC mgChl.-a⁻²d⁻¹) throughout the euphotic zone was mainly found in the shelf area rather than off-shelf area, probably due to higher nutrient availability and higher activity of phytoplankton at the subsurface layer in the shelf area.     

Developing a Marine Information System by Integrating Existing Ocean Models Using Object-Oriented Technology

Information systems developed for different applications within the environmental domain have common characteristics, which can potentially be abstracted for sharing and reuse of design and software modules. This article presents an approach to designing for reuse by abstracting commonalities in the design of a Marine Information System (MIS), facilitating data management in a prototype operational monitoring, forecasting, and management system for the North Atlantic and the Nordic Seas. A detailed study of the requirements and data analysis was carried out, and Object-Oriented Technology (OOT) is employed to encapsulate abstractions and to promote reuse of code and design. This article identifies the Object-Oriented Frameworks (OOFW) required to build the MIS. It also provides guidelines to environmental scientists for restructuring legacy software and employing modern programming techniques.     

Observed foundation behaviour of concrete gravity platforms installed in the North Sea 1973–1978

Available measurements of foundation behaviour of the 13 concrete gravity platforms installed in the North Sea in the years 1973–1978 are presented. The measurements cover both the installation phase and the early part of the operation period. For the installation phase, measurements of dowel and skirt penetration resistance, base contact stresses, tilt, piping and erosion, are presented. For the operation period, the presentation includes measurements of settlements, pore water pressures, base contact stresses, permanent lateral displacements, cyclic displacements, dynamic behaviour and erosion. The measurements are used to back calculate soil properties and to evaluate the adequacy of the design procedures which have been used. The observations give valuable experience with respect to the foundation performance of offshore gravity platforms.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The