The effect of seafloor topography in the Southern Ocean on tabular iceberg drifting and grounding

Antarctic tabular icebergs are important active components in the ice sheet-ice shelf-ocean system. Seafloor topography is the key factor that affects the drifting and grounding of icebergs, but it has not been fully investigated. This study analyzes the impact of seafloor topography on the drifting and grounding of Antarctic tabular icebergs using Bedmap-2 datasets and iceberg route tracking data from Brigham Young University. The results highlight the following points. (1) The quantitative distributions of iceberg grounding events and the tracking points of grounded icebergs are mainly affected by iceberg draft and reach their peak values in sea water with depths between 200 m and 300 m. The peak tracking point number and linear velocity of free-drifting icebergs are found in the Antarctic Slope Front (water depth of approximately 500 m). (2) The area of possible grounding regions of small-scale icebergs calved from ice shelf fronts accounts for 28% of the sea area at water depths less than 2000 m outside the Antarctic coastline periphery (3.62 million km²). Their spatial distribution is mainly around East Antarctica and the Antarctic Peninsula. The area of possible grounding regions of large tabular icebergs with long axes larger than 18.5 km (in water depths of less than 800 m) accounts for 74% of the sea area. (3) The iceberg drifting velocity is positively correlated with ocean depth in areas where the depth is less than 2000 m (R=0.85, P<0.01). This result confirms the effect of water depth variations induced by seafloor topography fluctuations on iceberg drifting velocity.     

Compression studies of gibbsite and its high-pressure polymorph

Various X-ray diffraction methods have been applied to study the compression behavior of gibbsite, Al(OH)₃, in diamond cells at room temperature. A phase transformation was found to take place above 3 GPa where gibbsite started to convert to its high-pressure polymorph. The high-pressure (HP) phase is quenchable and coexists with gibbsite at the ambient conditions after being unloaded. This HP phase was identified as nordstrandite based on the diffraction patterns obtained at room pressure by angle dispersive and energy dispersive methods. On the basis of this structural interpretation, the bulk modulus of the two polymorphs, i.e., gibbsite and nordstrandite, could be determined as 85 ± 5 and 70 ± 5 GPa, respectively, by fitting a Birch-Murnaghan equation to the compression data, assuming their K_o ^′ as 4. Molar volume cross-over occurs at 2 GPa, above which the molar volume of nordstrandite is smaller than that of gibbsite. The differences in the molar volume and structure between the two polymorphs are not significant, which accounts for the irreversibility of the phase transition. In gibbsite, the axial compressibility behaves as c/c _o > a/a _o > b/b _o. This is due to the fact that the dioctahedral sheets along the c-axis are held by the relatively weak hydrogen bonding, which results in the greater compressibility along this direction. In nord- strandite, the axial compressibility is b/b _o > c/c _o > a/a _o, which can also be interpreted as resulting from the the existence of hydrogen bonds along the b-axis. Received: 28 September 1998 / Revised, accepted: 22 December 1998     

Anthropogenic transformations of the Arctic ecosystem of Lake Imandra: Tendencies for recovery after long period of pollution

Transformation of an Arctic aquatic ecosystem (a case study of Lake Imandra) under the impact of a mining industrial complex is considered. Water chemical composition and the ecosystem’s structural components (phyto- and zooplankton, zoobenthos, and ichthiofauna) are analyzed for the following periods: the preindustrial background (reference) conditions, industrial development of mineral resources and strong anthropogenic impact, industrial recession and decreased anthropogenic impact, and stabilization. The main regularities of the aquatic ecosystem successions under the conditions of anthropogenic loads and their decrease are established.     

The application of lead isotope ratios in the Antarctic macroalga Iridaea cordata as a contaminant monitoring tool

Lead (Pb) isotope ratios were measured in the marine macroalga Iridaea cordata collected from four locations in the Windmill Islands, East Antarctica. Based on the masses of thalli collected, samples analysed in this study were likely to be a mixture of one and two year old thalli. For a sample of thalli of various ages (<12 months to 2 years old) from the same site there was no apparent variation in Pb concentration or Pb isotope ratio with thallus mass/age, indicating that contaminant sources had been constant over the lifetime of the thalli sampled. I.cordata samples close to the Thala Valley waste disposal site (Brown Bay Inner) near the Australian Station, Casey, displayed isotopic signatures (²⁰⁸Pb/²⁰⁴Pb 35.99; ²⁰⁶Pb/²⁰⁷Pb 1.066; n = 3; average values shown) trending towards that possessed by major Australian Pb sources (Broken Hill and Mt Isa, ²⁰⁸Pb/²⁰⁴Pb 35.60; ²⁰⁶Pb/²⁰⁷Pb 1.041) suggesting that these samples had been exposed to anthropogenic Pb originating from the Thala Valley waste disposal site. Material collected hundreds of metres from the tip location at Brown Bay Outer had isotopic values (²⁰⁸Pb/²⁰⁴Pb 36.32; ²⁰⁶Pb/²⁰⁷Pb 1.088; n = 10) intermediate between Brown Bay Inner and sites further from the contaminant source at Sparkes Bay and Wilkes (²⁰⁸Pb/²⁰⁴Pb 36.46; ²⁰⁶Pb/²⁰⁷Pb 1.094; n = 4) showing that contaminant transport was predominantly restricted to Brown Bay Inner. This study demonstrates that the isotope ratios of Pb in marine macroalgae can provide valuable information as to the origin and extent of heavy metal flux in a marine environment.     

Precise photorealistic visualization for restoration of historic buildings based on tacheometry data

This paper puts forward a 3D reconstruction methodology applied to the restoration of historic buildings taking advantage of the speed, range and accuracy of a total geodetic station. The measurements representing geo-referenced points produced an interactive and photorealistic geometric mesh of a monument named ‘Neoria.’ ‘Neoria’ is a Venetian building located by the old harbor at Chania, Crete, Greece. The integration of tacheometry acquisition and computer graphics puts forward a novel integrated software framework for the accurate 3D reconstruction of a historical building. The main technical challenge of this work was the production of a precise 3D mesh based on a sufficient number of tacheometry measurements acquired fast and at low cost, employing a combination of surface reconstruction and processing methods. A fully interactive application based on game engine technologies was developed. The user can visualize and walk through the monument and the area around it as well as photorealistically view it at different times of day and night. Advanced interactive functionalities are offered to the user in relation to identifying restoration areas and visualizing the outcome of such works. The user could visualize the coordinates of the points measured, calculate distances and navigate through the complete 3D mesh of the monument. The geographical data are stored in a database connected with the application. Features referencing and associating the database with the monument are developed. The goal was to utilize a small number of acquired data points and present a fully interactive visualization of a geo-referenced 3D model.     

Evaluation of hydrogeochemical processes and groundwater quality for suitability of drinking and irrigation purposes: a case study in the Aosta Valley region,Italy

The present study aims to discuss the hydrogeochemical processes in the Aosta Valley region and assess the quality of its groundwater for suitability of drinking and irrigation purposes. One hundred twenty-two samples were collected from the Aosta Valley region in the years 2007 and 2008 (61 per year), and analysed for pH, electrical conductivity, total dissolved solids (TDS), total hardness, major cations and anions. The pH of the samples in both years indicated a near-neutral to alkaline nature of the groundwater. The cation and anion chemistry showed the general ionic abundance as: Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ and HCO₃ ^?>SO₄ ^2?>Cl^?>NO₃ ^?>F^? in both years. Ca²⁺-Mg²⁺-HCO₃ ^? and Ca²⁺-Mg²⁺-Cl^?-SO₄ ^2? were the dominant hydrogeochemical facies. The computed saturation indices demonstrated that the groundwater was supersaturated with respect to dolomite and calcite in both years. The groundwater chemistry of the study area was mainly controlled by the dissolution of carbonate, sulphate and silicate minerals, as well as ion exchange processes. A comparison of the groundwater quality in relation to drinking water standards showed that most of the water samples were suitable for drinking and domestic uses. The computed water quality index (WQI) values of the study area groundwater ranged from 24 to 84 in the year 2007 and from 22 to 82 in the year 2008, and all the location fell under the Excellent to Good category. Quality assessment for irrigation uses revealed that the groundwater was good to permissible quality for irrigation; however, locally higher salinity, residual sodium carbonate (RSC) and magnesium hazard (MH) restricted its suitability for irrigation at a few sites. These results will be useful in implementing future measures in groundwater resource management at regional and national level.     

Application of time-frequency transforms to processing of full waveforms from acoustic logs

The paper deals with the application of time-frequency methods, Continuous Wavelet Transform (CWT) and Matching Pursuit algorithm (MP), to acoustic full waveform processing. The goal of the research is to present possible ways of application of these methods, particularly for the precise identification of selected acoustic waves, waveform decomposition into separate waves, and determination of zones of different elastic parameters in the geological profiles. The simulations, developed methodology, and results of each method are discussed in detail. The Continuous Wavelet Transform is used to improve qualitative interpretation. Time-depth-frequency plots for a given frequency are constructed to distinguish the waves and identify gas-bearing zones. The Matching Pursuit has a better resolution in time-frequency space than CWT; thus, it is used to extract individual waves from the whole acoustic waveform, i.e., decompose the signal. For the extracted waves, the slowness is calculated. Results from MP methods are compared with their counterpart parameters obtained from the original waveforms. Additionally, time-frequency decompositions are used for the determination of the frequency content of each wave packet to get unique information about formation in situ.     

Instability of gradient dependent elasto-viscoplasticity for clay

A gradient-dependent viscoplastic constitutive model for water saturated clay is proposed to describe the strain localization phenomena and pattern formation during deformation. Second- and fourth-order gradients of volumetric viscoplastic strain are introduced into the constitutive equations to account for the non-local effects due to the motion of microstructures. A linear perturbation analysis is applied to this model. The instability of the government equations (i.e. the constitutive equations and the equations of motion for the clay skeleton and pore water) is discussed for both the one-dimensional and the two-dimensional situations. In addition, issues concerned with the formulation of boundary value problems by finite element analysis in relation to the formulation and the boundary conditions are presented. Copyright © 1999 John Wiley & Sons, Ltd.     

Performance analysis of the spaceborne laser ranging system

The Spaceborne Laser Ranging System is a proposed short pulse laser on board an orbiting spacecraft.^1,2,3,4 It measures the distance between the spacecraft and many laser retroreflectors (targets) deployed on the Earth’s surface. The precision of these range measurements is assumed to be about ±2 cm (M. W. Fitzmaurice, private communication). These measurements are then used together with the orbital dynamics of the spacecraft, to derive the relative position of the laser ground targets. Assuming a six day observing period with 50% cloud cover, uncertainties in the baseline for target separations of 50 km to 1200 km were estimated to be on the order of 1 to 3 cm and the corresponding values in the vertical direction, ranged from 1 cm to 12 cm. By redetermining the measurements of the relative target positions, the estimated precision in the baseline for a target separation of 50 km is less than 0.3 cm and for a separation of 1200 km is less than 1 cm. In the vertical direction, the estimated precision ranged from 0.4 cm to 4.0 cm respectively. As a result of the repeated estimation of the relative laser target positions, most of the non-temporal effects of error sources as exemplified by the errors in geopotential are reduced. The Spaceborne Laser Ranging System’s capability of determining baselines to a high degree of precision provides a measure of strain and strain rate as shown byCohen, 1979. These quantities are essential for crustal dynamic studies which include determination and monitoring of strain near seismic zones, land subsidence, and edifice building preceding volcanic eruptions. It is evident that such a system can also be used for geodetic surveys where such precisions are more than adquate.