塞曼石墨炉原子吸收法直接测定海水中的铜

本文选择酒石酸消除海水基体对铜信号的干扰,用塞曼石墨炉原子吸收法直接测定海水中的铜。从Cu的原子化曲线可知,加入酒石酸后,背景值减小,Cu原子吸收信号增强,且出现时间提前,表明酒石酸是有效的海水基体改进剂。用P.E.Z3030光谱仪测得双蒸水及海水中的元素Cu的特征质量(m。)分别为12.5pg及12.7pg;检测限分别为0.18μg/L和0.19μg/L,表明基体效应已消除,符合海洋监测要求。可用纯Cu标准溶液作校正曲线,以国家海洋局的两个标准海水样品中的Cu评定本法的准确度,相对偏差为0及-4.6%,与经典的经富集后的FAAS法的结果相比,相对偏差在3.0—6.5％范围内。用不同类型的光谱仪测定了30个海水样品,回收率在89—104％范围内。本法操作简便、快速。     

A detailed geochemical and rock magnetic study of dredged basalt from the Sheba Ridge,Gulf of Aden

We report the results of petrological, geochemical and rock magnetic studies of basalt dredged from the eastern end of the west Sheba Ridge during cruise 11/1979 of R. R. S. Shackleton to the Western Gulf of Aden. The ridge is part of the Red Sea-Gulf of Aden spreading axis and the basalts are olivine tholeiites. The abundances of some elements are characteristic of normal MORB (mid-ocean ridge basalt) but other elemental abundances suggest affinites with transitional-type MORB.The observed magnetic properties are interpreted in terms of the composition, concentration and microstructure of the magnetic mineral fraction by recourse to the available data on synthetic analogues. The analysis has been carried out in greater detail than has been attempted in previous magneto-petrological studies. It appears that submarine weathering of the magnetic minerals (maghemitization) brings about not only the expected change in composition but also a fall in concentration of the magnetic fraction. This could result from the removal-of-iron oxidation mechanism operating in the submarine environment. It is also found that the fall in remanence with increasing degree of maghemitization is not explicable in terms of the change in composition and concentration of the magnetic minerals. A further influence—probably microstructural change—significantly reduces the remanence intensity.     

中国对虾新病害—肠结节病的观察

1991年7～8月浙江省宁波、舟山地区一些中国对虾Penaeruschinensis的养虾场中爆发了一种肠结节新病害,危害十分严重。本文报导该病发生与危害的情况以及症状、病原、组织病理观察的结果。     

Behavioural Effects of Chemically Dispersed Oil and Subsequent Recovery in Diploria strigosa (Dana)

Abstract. Survival and behaviour of the hermatypic coral Diploria strigosa was studied during 6–24 h doses with water-accomodated fractions of chemically dispersed crude oil, and for a subsequent recovery period of 1 month. Experiments utilized a flow-through laboratory dosing procedure and incorporated petroleum hydrocarbon measurements in order to simulate a major but short-term oil spill in shallow subtidal benthic reef environments. Chemically dispersed oil treatments consisted of Arabian Light Crude oil with Corexit 9527 or BP1100WD at 1–20 ppm concentrations of oil.
In general, effects observed were sub-lethal, temporary, and associated with the highest concentrations tested. Responses to the presence of dispersed oil at 20ppm for 24 h included mesenterial filament extrusion, extreme tissue contraction, tentacle retraction and localized tissue rupture. The nature and severity of reactions during the dosing phase varied between colonies and treatments, but colonies typically resumed normal behaviour within 2 h to 4 d of the recovery period. It therefore seems unlikely that observed biological effects would impair long-term viability.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Evidence for methane and hydrogen sulfide venting imprinted on a Quaternary eolianite from southern Israel

Two different and physically separated chemosynthetic communities of bacteria are responsible for the formation of the Beeri native sulfur deposit hosted in a Late Quaternary sandstone on the southern coastal plain of Israel. The enriched concentrations are distributed over an area of about 1 km², within a zone 2–3 m thick at 1–13 m below surface. Two hundred fifty meters below the sulfur deposit, sulfur-reducing bacteria, thriving on methane generated in Neogene marls, reduced the Messinian gypsum to generate hydrogen sulfide, which subaqueously vented together with methane into the siliciclastic Quaternary sequence. Another, different chemosynthetic community ofBeggiatoa-like and unidentified bacteria oxidized the hydrogen sulfide into native sulfur and secondary gypsum, alunite, and iron sulfates. The coupled chemical and bacterial processes attributed to the formation of the sulfur deposit at Beeri are strikingly similar to the processes occurring today in the context of submarine hydrocarbon vents associated with the salt diapirs in the Gulf of Mexico.     

中国对虾丝状细菌的扫描电镜研究

本文应用扫描电镜研究了中国对虾丝状细菌的结构,附着方式及其对对虾的危害和与环境的关系。     

High Precision Geoid Models HKGEOID-2000 for Hong Kong and SZGEOID-2000 for Shenzhen, China

High precision geoid models HKGEOID-2000 for Hong Kong and SZGEOID-2000 for Shenzhen, China, have been developed with a hybrid approach of so-called sequential processing, using high precision GPS/leveling data, land and sea gravity anomalies, and digital terrain models. These two local geoid models have the same 1-km resolution. The estimated accuracy (external accuracy) is better than 1.7 cm for HKGEOID-2000 and 1.4 cm for SZGEOID-2000. Some common areas are covered by HKGEOID-2000 and SZGEOID-2000. So these two geoid models, along with high quality GPS/leveling data collected on the overlapping areas, can be used to detect the systematic bias between HKGEOID-2000 and SZGEOID-2000, as well as the difference between Hong Kong Principal Datum and 1956 yellow sea height datum of China, yielding RMS errors of 1.011 m and 1,003 m, respectively. Moreover, HKGEOID-2000, along with GPS ellipsoidal heights, is employed to determine the errors of the “orthometric heights” from purely trigonometric heighting, yielding an RMS error of 0.102 m. The combination of SZGEOID-2000 and GPS ellipsoidal heights has been used to replace the traditional spirit leveling and mapping, called GPS mapping.     

Code of Practice For Ocean Mining: An International Effort to Develop a Code For Environmental Management of Marine Mining

A code of practice for ocean mining has been developed by the International Marine Minerals Society. The code provides general guiding Principles for development of marine mineral resources and delineates Operating Guidelines for application, as appropriate, at specific mining sites. In total 11 operating guidelines are provided to serve as benchmarks for industry and targets for regulatory agencies and other stakeholders. They include the following commitments: •To sustainable development, •To environmentally responsible corporate ethics, •To the development of effective community partnership, •To implementation of environmental risk management, •To the integration of environmental management into all phases of development, •To the establishment of corporate environmental performance targets, •To timely environmental improvements and upgrading, •To responsible rehabilitation of operations sites and decommissioning of facilities, and •To accurate and timely, reporting and documentation, archiving, and performance review.