Calibration measurements on the DEPFET Detectors for the MIXS instrument on BepiColombo

The Mercury Imaging X-ray Spectrometer (MIXS) will be launched on board of the 5th ESA cornerstone mission BepiColombo. The two channel instrument MIXS is dedicated to the exploration of the elemental composition of the mercurian surface by imaging x-ray spectroscopy of the elemental fluorescence lines. One of the main scientific goals of MIXS is to provide spatially resolved elemental abundance maps of key rock-forming elements. MIXS will be the successor of the XRS instrument, which is currently orbiting Mercury on board of NASAs satellite MESSENGER. MIXS will provide unprecedented spectral and spatial resolution due to its innovative detector and optics concepts. The MIXS target energy band ranges from 0.5 to 7 keV and allows to directly access the Fe-L line at 0.7 keV, which was not accessible to previous missions. In addition, the high spectroscopic resolution of FWHM ≤ 200 eV at the reference energy of 1 keV after one year in Mercury orbit, allows to separate the x-ray fluorescence emission lines of important elements like Mg (1.25 keV) and Al (1.49 keV) without the need for any filter. The detectors for the energy and spatially resolved detection of x-rays for both channels are identical DEPFET (DEpleted P-channel FET) active pixel detectors. We report on the calibration of the MIXS flight and flight spare detector modules at the PTB (Physikalisch-Technische Bundesanstalt) beamlines at the BESSY II synchrotron radiation facility. Each detector was calibrated at least at 10 discrete energies in the energy range from 0.5 to 10 keV. The excellent spectroscopic performance of all three detector modules was verified.     

Radiation hydrodynamic simulation of a photoionised plasma experiment at the Z facility

New, high spectral resolution X-ray observations from astrophysical photoionised plasmas have been recorded in recent years by the Chandra and XMM-Newton orbiting telescopes. These observations provide a wealth of detailed information and have motivated new efforts at developing a detailed understanding of the atomic kinetics and radiation physics of photoionised plasmas. The Z facility at Sandia National Laboratories is a powerful source of X-rays that enables us to produce and study photoionised plasmas in the laboratory under well characterised conditions. We discuss a series of radiation-hydrodynamic simulations to help understand the X-ray environment, plasma hydrodynamics and atomic kinetics in experiments where a collapsing wire array at Z is used as an ionising source of radiation to create a photoionised plasma. The numerical simulations are used to investigate the role that the key experimental parameters have on the photoionised plasma characteristics.     

Cenozoic stratigraphy and subsidence history of the South China Sea margin in the Taiwan region

Seismic reflection profiles and well data are used to determine the Cenozoic stratigraphic and tectonic development of the northern margin of the South China Sea. In the Taiwan region, this margin evolved from a Palaeogene rift to a latest Miocene–Recent foreland basin. This evolution is related to the opening of the South China Sea and its subsequent partial closure by the Taiwan orogeny. Seismic data, together with the subsidence analysis of deep wells, show that during rifting (～58–37 Ma), lithospheric extension occurred simultaneously in discrete rift belts. These belts form a >200 km wide rift zone and are associated with a stretching factor, β, in the range ～1.4–1.6. By ～37 Ma, the focus of rifting shifted to the present‐day continent–ocean boundary off southern Taiwan, which led to continental rupture and initial seafloor spreading of the South China Sea at ～30 Ma. Intense rifting during the rift–drift transition (～37–30 Ma) may have induced a transient, small‐scale mantle convection beneath the rift. The coeval crustal uplift (Oligocene uplift) of the previously rifted margin, which led to erosion and development of the breakup unconformity, was most likely caused by the induced convection. Oligocene uplift was followed by rapid, early post‐breakup subsidence (～30–18 Ma) possibly as the inferred induced convection abated following initial seafloor spreading. Rapid subsidence of the inner margin is interpreted as thermally controlled subsidence, whereas rapid subsidence in the outer shelf of the outer margin was accompanied by fault activity during the interval ～30–21 Ma. This extension in the outer margin (β～1.5) is manifested in the Tainan Basin, which formed on top of the deeply eroded Mesozoic basement. During the interval ～21–12.5 Ma, the entire margin experienced broad thermal subsidence. It was not until ～12.5 Ma that rifting resumed, being especially active in the Tainan Basin (β～1.1). Rifting ceased at ～6.5 Ma due to the orogeny caused by the overthrusting of the Luzon volcanic arc. The Taiwan orogeny created a foreland basin by loading and flexing the underlying rifted margin. The foreland flexure inherited the mechanical and thermal properties of the underlying rifted margin, thereby dividing the basin into north and south segments. The north segment developed on a lithosphere where the major rift/thermal event occurred ～58–30 Ma, and this segment shows minor normal faulting related to lithospheric flexure. In contrast, the south segment developed on a lithosphere, which experienced two more recent rift/thermal events during ～30–21 and ～12.5–6.5 Ma. The basal foreland surface of the south segment is highly faulted, especially along the previous northern rifted flank, thereby creating a deeper foreland flexure that trends obliquely to the strike of the orogen.     

A broad‐scale assessment of the effect of improved soil management on catchment baseflow index

Although the importance of sustainable soil management is recognized, there are many threats to soils including widespread soil structural degradation. This reduces infiltration through the soil surface and/or the percolation of water through the soil profile, with important consequences for crop yields, nutrient cycling and the hydrological response of catchments. This article describes a broad‐scale modelling approach to assess the potential effect that improved agricultural soil management, through reduced soil structural degradation, may have on the baseflow index (BFI) of catchments across England and Wales. A daily soil–water balance model was used to simulate the indicative BFI of 45 696 thirty‐year model runs for different combinations of soil type, soil/field condition, land cover class and climate which encapsulate the variability across England and Wales. The indicative BFI of catchments was then calculated by upscaling the results by spatial weighting. WaSim model outputs of indicative BFI were within the 95% confidence intervals of the national‐average BFI values given for the Hydrology of Soil Type (HOST ? ) classes for 26 of the 28 classes. At the catchment scale, the concordance correlation coefficient between the BFI from the WaSim model outputs and those derived from HOST was 0·83. Plausible improvements in agricultural soil/field condition produced modest simulated increases of up to 10% in the indicative BFI in most catchments across England and Wales, although for much of southern and northern England the increases were less than 5%. The results suggest that improved soil management might partially mitigate the expected adverse effects of climate change on baseflow to rivers. Healthy, well‐functioning soils produce many additional benefits such as better agricultural yields and reduced pollutant movement, so improved soil management should provide win‐win opportunities for society, agricultural systems and the environment and provide resilience to some of the expected environmental impacts of climate change. Copyright © 2011 John Wiley & Sons, Ltd.     

Evidence for long-term asymmetries in the Earth's magnetic field and possible implications for dynamo theories

Paleomagnetic data indicate that there is a north-south asymmetry in the time-averaged magnetic field and that there are small but significant differences between the normal and reverse polarity states. The geographical variation is most likely due to spatial variation in the boundary conditions at the core-mantle interface. The difference in the magnetic fields of the reverse and normal polarity states can be modeled in terms of a “standing field”. The paleomagnetic data are insufficient to determine whether or not this “standing field” is of core origin. However, consideration of mechanisms, including thermoelectric currents, indicates that there probably are important differences in core processes between the two polarity states. At first glance this interpretation is difficult to reconcile with the fact that the magnetic induction equation is antisymmetric with respect to the magnetic field. A way around this problem is the possibility that only certain transitions are allowed between acceptable eigenstates in dynamo models of the Earth's magnetic field.     

Phase relations in fluorine-bearing granite and nepheline syenite systems at 800°C and 1 kbar

The data obtained on the sodic part of the SiO₂-Al₂O₃-Na₂O-K₂O system with F at 800°C and 1 kbar provide the basis for constructing a phase diagram showing the region of an aluminosilicate melt. In this system, oxide and fluoride phases are identified that control the stability field of the melt and the solubility of F. Liquid immiscibility was detected in aluminous nepheline-and quartz-normative Li-bearing compositions (the latter compositions are characterized by a wider immiscibility field). Solubility of F was determined in an aluminosilicate melt saturated with respect to F, i.e., coexisting with phases rich in this element. The F concentrations in the glasses range from 2 to 20 wt %. The quartz-normative glasses are poorer in F (no more than 5 wt % F) than the nepheline-normative glasses (which contain mostly 5–10 wt % F). The maximum F concentrations (> 10 wt %) in the phase diagram lie on both sides of the albite composition point in the region of ultragpaitic nepheline-normative melts and in the region of normal syenite melts. Changes in the phase relations when Na is substituted for K were determined in the quartz-normative silicate melt.     

Groundwater targeting in a hard-rock terrain using fracture-pattern modeling, Niva River basin, Andhra Pradesh, India

In hard-rock terrain, due to the lack of primary porosity in the bedrock, joints, fault zones, and weathered zones are the sources for groundwater occurrence and movement. To study the groundwater potential in the hard-rock terrain and drought-prone area in the Niva River basin, southern Andhra Pradesh state, India, Landsat 5 photographic data were used to prepare an integrated hydrogeomorphology map. Larsson's integrated deformation model was applied to identify the various fracture systems, to pinpoint those younger tensile fracture sets that are the main groundwater reservoirs, and to understand the importance of fracture density in groundwater prospecting. N35°–55°E fractures were identified as tensile and N35°–55°W fractures as both tensile and shear in the study area. Apparently, these fractures are the youngest open fractures. Wherever N35°–55°E and N35°–55°W fracture densities are high, weathered-zone thickness is greater, water-table fluctuations are small, and well yields are high. Groundwater-potential zones were delineated and classified as very good, good to very good, moderate to good, and poor. Electronic Publication     

Annual and monthly rainfall data generation schemes

Synthetic annual and monthly rainfall data series are generated by using autoregressive (AR) processes, Thomas-Fiering (TF) model, method of fragments (F) and its modified version (MF), two-tier (TT) model, and a newly developed wavelet (W) approach. It is seen that the W approach is as well in preserving the statistical behavior of the observed data series as the classical annual and monthly hydrological data generation schemes used in this study. The W approach is found even better in replacing some particular characteristics such as the mean of the sequence and correlation between the successive months in the series. It is, therefore, proposed as a new annual and monthly hydrological data generation scheme.