Silica-merrihueite/roedderite-bearing chondrules and clasts in ordinary chondrites: New occurrences and possible origin

Abstract Merrihueite (K,Na)₂(Fe, Mg)₅Si₁₂O₃₀ (na < 0.5, fe > 0.5, where na = Na/(Na + K), fe = Fe/(Fe + Mg) in atomic ratio) is a rare mineral described only in several chondrules and irregularly-shaped fragments in the Mezö-Madaras L3 chondrite (Dodd et al., 1965; Wood and Holmberg, 1994). Roedderite (Na,K)₂(Mg, Fe)₅Si₁₂O₃₀ (na > 0.5, fe < 0.5) has been found only in enstatite chondrites and in the reduced, subchondritic silicate inclusions in IAB irons (Fuchs, 1966; Rambaldi et al., 1984; Olsen, 1967). We describe silica-roedderite-bearing clasts in L/LL3.5 ALHA77011 and LL3.7 ALHA77278, a silica-roedderite-bearing chondrule in L3 Mezö-Madaras, and a silica-merrihueite-bearing chondrule in L/LL3.5 ALHA77115. The findings of merrihueite and roedderite in ALHA77011, ALHA77115, ALHA77278 and Mezö-Madaras fill the compositional gap between previously described roedderite in enstatite chondrites and silicate inclusions in IAB irons and merrihueite in Mezö-Madaras, suggesting that there is a complete solid solution of roedderite and merrihueite in meteorites. We infer that the silica- and merrihueite/roedderite-bearing chondrules and clasts experienced a complex formational history including: (a) fractional condensation in the solar nebula that produced Si-rich and Al-poor precursors, (b) melting of fractionated nebular solids resulting in the formation of silica-pyroxene chondrules, (c) in some cases, fragmentation in the nebula or on a parent body, (d) reaction of silica with alkali-rich gas that formed merrihueite/roedderite on a parent body, (e) formation of fayalitic olivine and ferrosilite-rich pyroxene due to reaction of silica with oxidized Fe on a parent body, and (f) minor thermal metamorphism, possibly generated by impacts.     

On the reoccurrence of site specific response

The period and amplitude variations of local peaks in the Fourier amplitude spectra of free-field strong ground motion recorded at five stations in San Fernando Valley of metropolitan Los Angeles, California, are described, searching for peaks that reoccur during different earthquakes. The data suggest that some local peaks reoccur (about 50% of the time), during shaking by small local earthquakes (peak ground velocities, v_max<10–20 cm/s). During large strong motion amplitudes (v_max>20 cm/s), these peaks are shifted towards longer periods (by nonlinear response of soils) or disappear. The data also suggest that densification and settlement of soil, minutes and hours following the strong shaking may contribute towards fluctuations in the effective stiffness of the shallow surface layers.     

Sedimentary and tectonic evolution of Lake Ohrid (Macedonia/Albania)

Lake Ohrid, located on the Balkan Peninsula within the Dinaride–Albanide–Hellenide mountain belt, is a tectonically active graben within the South Balkan Extensional Regime (SBER). Interpretation of multichannel seismic cross sections and bathymetric data reveals that Lake Ohrid formed during two main phases of deformation: (1) a transtensional phase which opened a pull‐apart basin, and (2) an extensional phase which led to the present geometry of Lake Ohrid. After the initial opening, a symmetrical graben formed during the Late Miocene, bounded by major normal faults on each side in a pull‐apart type basin. The early‐stage geometry of the basin has a typical rhomboidal shape restricted by two sets of major normal faults. Thick undisturbed sediments are present today at the site where the acoustic basement is deepest, illustrating that Lake Ohrid is a potential target for drilling a long and continuous sediment core for studying environmental changes within the Mediterranean region. Neotectonic activity since the Pliocene takes place along the roughly N–S‐striking Eastern and Western Major Boundary Normal Faults that are partly exposed at the present lake floor. The tectono‐sedimentary structure of the basin is divided into three main seismic units overlying the acoustic basement associated with fluvial deposits and lacustrine sediments. A seismic facies analysis reveals a prominent cyclic pattern of high‐ and low‐amplitude reflectors. We correlate this facies cyclicity with vegetation changes within the surrounding area that are associated with glacial/interglacial cycles. A clear correlation is possible back to ca. 450 kyrs. Extrapolation of average sedimentation rates for the above mentioned period results in age estimate of ca. 2 Myrs for the oldest sediments in Lake Ohrid.     

Episode 49 of the Pu'u 'O'o-Kupaianaha eruption of Kilauea volcano-breakdown of a steady-state eruptive era

The Pu'u 'O'o-Kupaianaha eruption (1983-present) is the longest lived rift eruption of either Kilauea or neighboring Mauna Loa in recorded history. The initial fissure opening in January 1983 was followed by three years of episodic fire fountaining at the Pu'u 'O'o vent on Kilauea's east rift zone 19km from the summit (episodes 4–47). These spectacular events gave way in July 1986 to five and a half years of nearcontinuous, low-level effusion from the Kupaianaha vent, 3km to the cast (episode 48). A 49th episode began in November 1991 with the opening of a new fissure between Pu'u 'O'o and Kupaianaha. this three week long outburst heralded an era of more erratic eruptive behavior characterized by the shut down of Kupaianaha in February 1992 and subsequent intermittent eruption from vents on the west flank of Pu'u 'O'o (episodes 50 and 51). The events occurring over this period are due to progressive shrinkage of the rift-zone reservoir beneath the eruption site, and had limited impact on eruption temperatures and lava composition.     

Mineralogical,geochemical and microfabric evidences of gypsum crusts: a case study from Budapest

High levels of SO₂ and particulate pollution enable the rapid development of gypsum-rich weathering crusts in Budapest. Two types of white crusts, thin and thick ones, and two forms of black crusts, laminar and framboidal ones, were studied in limestone buildings of the parliament and Citadella. The percentage of crust cover and damage categories were documented on selected walls. Petrographic, XRD, XRF and sulphur isotope analyses were performed under laboratory conditions to understand the mechanism of crust formation. White crusts found both on exposed and sheltered walls display a calcite-rich layer with gypsum, while black crusts are enriched with gypsum. The sulphur isotopic composition of white and black crusts overlaps, but the crusts are slightly enriched in heavy isotopes compared to rainwater. S content, Si/Al ratios and particulates in black crusts suggest that air pollution (SO₂, dust) contributes to black crust formation. The accumulation of sulphur and Zn enrichment of white crusts were also documented indicating that under high pollution levels, even these compound can accumulate on exposed facades.     

Benthic foraminifers in upper Quaternary sediments of the southern Bering Sea: Distribution and paleoceanographic interpretations

Composition and distribution of benthic foraminifers, being coupled with isotopic-geochemical data on Upper Pleistocene and Holocene sediments from the southern Bering Sea (Core GC-11; 53°31′ N, 178°51′E, water depth 3060 m), demonstrate variations in bottom water properties during the last 54 kyr. Their abundance increased to some extent during short periods corresponding to warm Dansgaard-Oeshger interstadials 14, 12, 8, and 2 of marine isotopic stages (MIS) 3 and 2. The first and second deglaciation phases separated by the Younger Dryas cooling episode are marked by significant abundance peaks of benthic foraminifers (an order magnitude higher than in the glacial period), although their share in community of benthic and planktonic foraminifers taken together decreases. Species typical of stable high-productivity areas gain the dominant position. A significant proportion of agglutinated species in the Holocene sediments is indicative of Ca ions deficiency that accelerates dissolution of carbonate tests up to their disappearance approximately 2.5–3 ka ago.     

GIS as a Tool for Planning New Road Stretchesin Respect of Climatological Factors

Summary When planning a new road stretch there is a need for an evaluation of the local climate to estimate the winter road maintenance costs and what problems that could be expected along the road, e.g. areas subjected to frequent road slipperiness. At present these evaluations are performed manually and by field studies. In this paper a new perspective at solving the problem is presented, by means of using Geographical Information Systems (GIS). The basic approach uses three distinct weather types, each being characterised by local climate features. The weather types, which have been mapped separately, are clear days, clear/calm nights and cloudy/windy conditions. The main parameters used are solar irradiance, cold air drainage and ponding and height above sea level. To be able to get an overview of surface temperature variations in the landscape and their frequency of occurrence, the climatological features were classified according to the extent of temperature decrease (or in some cases increase). Three risk-classes were used for low temperatures (2, 1 and 0), with lowest temperatures being assigned the value 2, 1 is an intermediate class and the average of the whole area is represented by 0, e.g. horizontal ground in the case of incoming solar radiation. When a higher than average temperature is expected, for instance in many urban areas or sunny slopes, risk classes −1 and −2 are used. Frequencies of the studied situations were obtained from weather statistics and multiplied by the risk classes. Finally maps for each weather situation were combined into one map showing the expected relative risks and frequencies of low temperatures as climatological risk points. These climatological points, of for example two alternative road stretches, can be compared in order to evaluate the differences in local climate. The software IDRISI, PC Arc/Info and a digital elevation model were used for the calculation and mapping. Received April 1, 1997 Revised January 29, 1998     

Evaluation of the first GOCE static gravity field models using terrestrial gravity,vertical deflections and EGM2008 quasigeoid heights

Recently, four global geopotential models (GGMs) were computed and released based on the first 2 months of data collected by the Gravity field and steady-state Ocean Circulation Explorer (GOCE) dedicated satellite gravity field mission. Given that GOCE is a technologically complex mission and different processing strategies were applied to real space-collected GOCE data for the first time, evaluation of the new models is an important aspect. As a first assessment strategy, we use terrestrial gravity data over Switzerland and Australia and astrogeodetic vertical deflections over Europe and Australia as ground-truth data sets for GOCE model evaluation. We apply a spectral enhancement method (SEM) to the truncated GOCE GGMs to make their spectral content more comparable with the terrestrial data. The SEM utilises the high-degree bands of EGM2008 and residual terrain model data as a data source to widely bridge the spectral gap between the satellite and terrestrial data. Analysis of root mean square (RMS) errors is carried out as a function of (i) the GOCE GGM expansion degree and (ii) the four different GOCE GGMs. The RMS curves are also compared against those from EGM2008 and GRACE-based GGMs. As a second assessment strategy, we compare global grids of GOCE GGM and EGM2008 quasigeoid heights. In connection with EGM2008 error estimates, this allows location of regions where GOCE is likely to deliver improved knowledge on the Earth’s gravity field. Our ground truth data sets, together with the EGM2008 quasigeoid comparisons, signal clear improvements in the spectral band ~160–165 to ~180–185 in terms of spherical harmonic degrees for the GOCE-based GGMs, fairly independently of the individual GOCE model used. The results from both assessments together provide strong evidence that the first 2 months of GOCE observations improve the knowledge of the Earth’s static gravity field at spatial scales between ~125 and ~110 km, particularly over parts of Asia, Africa, South America and Antarctica, in comparison with the pre-GOCE-era.     

Trends in the solubility of iron,aluminium, manganese and phosphorus in aerosol collected over the Atlantic Ocean

The solubility of iron, aluminium, manganese and phosphorus has been determined in aerosol samples collected between 49°N and 52°S during three cruises conducted in the Atlantic Ocean as part of the European Union funded IRONAGES programme. Solubilities (defined at pH 4.7) determined for Fe and Al in samples of Saharan dust were significantly lower (medians 1.7% and 3.0%, respectively) than the solubilities of these metals in aerosols from other source regions (whole dataset medians 5.2% and 9.0%, respectively). Mn solubility also varied with aerosol source, but the median solubility of Mn in Saharan dust was very similar to the median for the dataset as a whole (55% and 56%, respectively). The observed solubility of aerosol P was ∼ 32%, with P solubility in Saharan aerosol perhaps as low as 10%. Laboratory studies have indicated that aerosol Fe solubility is enhanced by acid processing. No relationship could be found between Fe solubility and the concentrations of acid species (non-seasalt SO₄²⁻, NO₃⁻) nor the net acidity of the aerosol, so we are unable to confirm that this process is significant in the atmosphere. In terms of the supply of soluble Fe to oceanic ecosystems on a global scale, the observed higher solubility for Fe in non-Saharan aerosols is probably not significant because the Sahara is easily the dominant source of Fe to the Atlantic. On a smaller scale however, higher solubility for aerosol Fe may alter our understanding of Fe cycling in regions such as the remote Southern Ocean.