Structural investigation of the synthetic CaAn(PO4)2 (An = Th and Np) cheralite-like phosphates

The crystallographic structures of the synthetic cheralite, CaTh(PO₄)₂, and its homolog CaNp(PO₄)₂ have been investigated by X-ray diffraction at room temperature. Rietveld analyses showed that both compounds crystallize in the monoclinic system and are isostructural to monazite LnPO₄ (Ln = La to Gd). The space group is P2₁/n (I.T. = 14) with Z = 2. The refined lattice parameters of CaTh(PO₄)₂ are a = 6.7085(8) Å, b = 6.9160(6) Å, c = 6.4152(6) Å, and β = 103.71(1)° with best fit parameters R _wp = 4.87%, R _p = 3.69% and R _B = 3.99%. For CaNp(PO₄)₂, we obtained a = 6.6509(5) Å, b = 6.8390(3) Å, c = 6.3537(8) Å, and β = 104.12(6)° and R _wp = 6.74%, R _p = 5.23%, and R _B = 6.05%. The results indicate significant distortions of bond length and angles of the PO₄ tetrahedra in CaTh(PO₄)₂ and to a lesser extent in CaNp(PO₄)₂. The structural distortions were confirmed by Raman spectroscopy of CaTh(PO₄)₂. A comparison with the isostructural compounds LnPO₄ (Ln = Ce and Sm) confirmed that the substitution of the large rare earth trivalent cations with Ca²⁺ and Th⁴⁺ introduces a distortion of the PO₄ tetrahedra.     

Comparative analyses of East Texas forest cover maps generated from Landsat and AVHRR data

Comparing satellite data derived map products are affected by differences in data characteristics, image acquisition dates, processing techniques, and classification schemes used for assigning pixels to a thematic class. By comparing two forest maps generated from Landsat Enhanced Thematic Mapper Plus (ETM+) and Advanced Very High Resolution Radiometer (AVHRR) images acquired on the same day, and processed using identical classification scheme and methods these differences were minimized. The ETM+ derived map had higher classification accuracy values and more precise area estimates than the AVHRR derived map. In the ETM+ derived map, 87 of the 599 verification data were misclassified, whereas in the AVHRR derived map, 155 of the 469 verification data were misclassified. Detailed error analyses by land cover class revealed that a land use based definition of forest accounted for 74% (64 out of 87) and 57% (89 out of 155) of the classification errors in ETM+ and AVHRR derived maps, respectively.     

Comparative urbanization in Ghana and Kenya in time and space

There are few inter-African country urban analyses because of the continent’s enormous size and socioeconomic diversity, language barriers, and wide variations in national and regional urban research capacity. Nevertheless, comparative urban studies are critical in understanding contemporary African urbanization. In this comparative spatial and temporal analysis of Ghana and Kenya’s urbanization, we find that both countries are urbanizing rapidly and are faced with many common urban problems. Moreover, Ghana is more urbanized than Kenya and has a larger indigenous urban imprint and a more widely dispersed urban pattern. Besides their physiographic and population conditions, we trace these countries’ convergent and divergent urban trends to their shared but unique experiences of colonialism, nationalism and globalization.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

The effect of naturally acidified irrigation water on agricultural volcanic soils. The case of Asembagus, Java, Indonesia

Acid water from the Banyuputih river (pH  3.5) is used for the irrigation of agricultural land in the Asembagus coastal area (East Java, Indonesia), with harmful consequences for rice yields. The river water has an unusual composition which is caused by seepage from the acidic Kawah Ijen crater lake into the river. This unique irrigation setting allows the study of soil acidification in situ. This paper assesses the effects of volcanogenically contaminated irrigation water on the chemical properties of the agricultural soils.The changes in soil properties were evaluated by comparing samples taken from the topsoil and sub-soil (1–3 m depth) from areas irrigated with acid water and areas irrigated with neutral water. The field survey thus resulted in four soil categories. Bulk soil composition, organic matter content, moisture content and particle size distribution were determined. Reactive phases were quantified with the selective extractions 1 M KCl, 0.1 M Na-pyrophosphate and 0.2 M acid ammonium oxalate (AAO).By comparing the four soil categories it is shown that the use of the naturally polluted irrigation water has had a large influence on the chemical composition of the topsoil. The composition of the soil solution has changed over the entire investigated soil profile. Furthermore the acid irrigation water has strongly modified the composition of the reactive phases, extracted as KCl, pyrophosphate, and AAO extractable elements, and also the bulk soil composition has been significantly modified. Overall this has resulted in the net dissolution of some elements and the net precipitation of others. The changes in the reactive phases and bulk soil composition are only apparent in the topsoil (0–20 cm) but not in the deeper soil.     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

Usefulness of geological,mineralogical, chemical and chemometric analytical techniques in exploitation and profitability studies of iron mines and their associated elements

Due to the high number of variables involved in mine profitability studies, it is often very difficult to establish connections among them in order to provide a blend of market saleable quality products. In this sense, analytical chemistry together with chemometry are essential and indispensable disciplines to tackle these studies. The aim of this work was to demonstrate the utility of these disciplines to carry out optimization studies of iron mines. For this purpose, one of the most important iron mines of the Iberian Peninsula was chosen, sited in the mountain range of Sierra Menera, near the location of Ojos Negros (Teruel, Spain). Geological, mineralogical and chemical composition of 148 samples was analyzed, corresponding to different depths of three drill holes (named TE1, TE2 and TE3). In particular, aspects concerning to chemical composition are very important, since the mean contents of certain elements, such as phosphorus, sodium and potassium, should be restricted to the established limits to prevent that companies can drive back the raw material if they do not fulfil the necessary requirements. On the other hand, the large number of analysed samples drove us to use a statistical processing of the data. Among other aspects, it provides a way to find possible connections among a high number of variables and classify samples into compositional groups sharing similar composition, in order to limit the mineralised area and to obtain enough information about the amount of those chemical elements associated to iron ores. Data obtained from all these analytical techniques were in good agreement and provide a methodology that can be of wide interest applied to different geological studies.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

Integration and magnitude homogenization of the Egyptian earthquake catalogue

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.     

Mineralogy and geochemistry of El Dorado epithermal gold deposit, El Sauce district, central-northern Chile

Summary The El Dorado Au-Cu deposit is located in an extensive intra-caldera zone of hydrothermal alteration affecting Upper Cretaceous andesites of the Los Elquinos Formation at La Serena (≈ 29°47′S Lat., 70°43′W Long., Chile). Quartz-sulfide veins of economic potential are hosted by N25W and N20E fault structures associated with quartz-illite alteration (+supergene kaolinite). The main ore minerals in the deposit are pyrite, chalcopyrite ± fahlore (As/(As + Sb): 0.06−0.98), with electrum, sphalerite, galena, bournonite-seligmanite (As/(As + Sb): 0.21−0.31), marcasite, pyrrhotite being accessory phases. Electrum, with an Ag content between 32 and 37 at.%, occurs interstitial to pyrite aggregates or along pyrite fractures. Pyrite commonly exhibits chemical zonation with some zones up to 1.96 at.% As. Electron probe microanalyses of pyrite indicate that As-rich zones do not exhibit detectable Au values. Fluid inclusion microthermometry shows homogenization temperatures between 130 and 352 °C and salinities between 1.6 and 6.9 wt.% NaCl eq. Isotope data for quartz, ankerite and phyllosilicates and estimated temperatures show that δ¹⁸O and δD for the hydrothermal fluids were between 3 and 10‰ and between −95 and −75‰, respectively. These results suggest the mineralizing fluids were a mixture of meteoric and magmatic waters. An epithermal intermediate-sulfidation model is proposed for the formation of the El Dorado deposit. Author’s present address: J. Carrillo-Rosúa, Dpto. de Didáctica de las Ciencias Experimentales, Universidad de Granada, Campus de Cartuja, 18071, Granada, Spain