Lagrangian measurements and modelling of fluid advection in the inner surf and swash zones

New laboratory and field data are presented on fluid advection into the swash zone. The data illustrate the region of the inner surf zone from which sediment can be directly advected into the swash zone during a single uprush, which is termed the advection length. Experiments were conducted by particle tracking in a Lagrangian reference frame, and were performed for monochromatic breaking waves, solitary bores, non-breaking solitary waves and field conditions. The advection length is normalised by the run-up length to give an advection ratio, A, and different advection ratios are identified on the basis of the experimental data. The data show that fluid enters the swash zone from a region of the inner surf zone that can extend a distance seaward of the bore collapse location that is approximately equal to half of the run-up length. This region is about eight times wider than the region predicted by the classical swash solution of Shen and Meyer [Shen, M.C., Meyer, R.E., 1963. Climb of a bore on a beach. Part 3. Runup. Journal of Fluid Mechanics 16, 113–125], as illustrated by Pritchard and Hogg [Pritchard, D., Hogg, A.J., 2005. On the transport of suspended sediment by a swash event on a plane beach. Coastal Engineering 52, 1–23]. Measured advection ratios for periodic waves show no significant trend with Iribarren number, consistent with self-similarity in typical swash flows. The data are compared to recent characteristic solutions of the non-linear shallow water wave (NLSW) equations and both finite difference and finite volume solutions of the NLSW equations.     

Discussion of “Wave setup and setdown generated by obliquely incident waves” by T.-W. Hsu et al., Coastal Engineering, 53, 865–877, 2006

In the recent paper by Tai-Wen Hsu, John R.-C. Hsu, Wen-Kai Weng, Swun-Kwang Wang, and Shan-Hwei Ou (Coastal Engineering, 53, 865–877, 2006), the authors derived theoretical formulations for calculating the wave setup and setdown induced by obliquely incident waves on a beach. The derivation of an expression for setdown contains errors which would lead to an imbalance in longshore momentum flux outside the surfzone. We correct their derivation and give results in terms of the radiation stress concept in a general case including an oblique wave incidence. We also point out that the correct form of wave setdown is important to describe the zero-net force in the momentum balance outside the surfzone.     

Trace elements and polycyclic aromatic hydrocarbons (PAHs) concentrations in deep Gulf of Mexico sediments

The concentrations of polycyclic aromatic hydrocarbons (PAHs) and trace elements were determined for surface (top 2 cm) sediment samples collected during the deep Gulf of Mexico benthos (DGoMB) study .These elements and compounds are known to be toxic to organisms at high concentrations and may affect biological communities. There is no indication of major anthropogenic input of the elements Be, Co, Cr, Fe, Si, Tl, V, K, Mg, Ca, Sr and Zn, based on normalization to Al. The concentrations of these metals in the sediment are a function of the relative amounts of trace-metal-rich Mississippi River-derived silicate material and trace-metal-poor plankton-derived carbonate. This is not true for the elements Ba, Ni, Pb, Cd, As, Cu and Mn, whose concentrations show considerable scatter when normalized to Al and a general enrichment. On a normalized basis, Mn is enriched 5–10 fold, Cu and Ni 2–3 fold and Pb 2 fold over Mississippi River-derived material. These enrichments are likely the result of remobilization of metals from depths in the sediment column where reducing conditions exist. The Ba concentrations at selected sites are higher than those of average clay-rich sediments, but are typical of sediments from near oil well platforms in the northern Gulf of Mexico. In the case of Ba, it seems likely that the enrichments, as high as a factor of 10, are due to disposal of oil well drilling mud. The Ba-enriched samples are from the three shallowest water sites in the Mississippi Trough (sites MT1, 2 and 3) and from site C1 and WC5. All are in an area of intense petroleum exploration and development. PAH concentrations are also elevated at MT1, MT3 and C1. The total PAH concentration ranged from not detected (ND) to 1033 ng/g with a mean of 140 ng/g. Even at the sites most enriched in PAHs and trace elements, the concentrations are not at the levels expected to adversely affect the biota. However, these predicted non-effects are based on research using mostly near-shore estuarine species, not on the indigenous species at the sampling sites.     

Changes in timber haul emissions in the context of shifting forest management and infrastructure

Background  

Although significant amounts of carbon may be stored in harvested wood products, the extraction of that carbon from the forest generally entails combustion of fossil fuels. The transport of timber from the forest to primary milling facilities may in particular create emissions that reduce the net sequestration value of product carbon storage. However, attempts to quantify the effects of transport on the net effects of forest management typically use relatively sparse survey data to determine transportation emission factors. We developed an approach for systematically determining transport emissions using: 1) -remotely sensed maps to estimate the spatial distribution of harvests, and 2) - industry data to determine landscape-level harvest volumes as well as the location and processing totals of individual mills. These data support spatial network analysis that can produce estimates of fossil carbon released in timber transport.     

Mapping and monitoring carbon stocks with satellite observations: a comparison of methods

Mapping and monitoring carbon stocks in forested regions of the world, particularly the tropics, has attracted a great deal of attention in recent years as deforestation and forest degradation account for up to 30% of anthropogenic carbon emissions, and are now included in climate change negotiations. We review the potential for satellites to measure carbon stocks, specifically aboveground biomass (AGB), and provide an overview of a range of approaches that have been developed and used to map AGB across a diverse set of conditions and geographic areas. We provide a summary of types of remote sensing measurements relevant to mapping AGB, and assess the relative merits and limitations of each. We then provide an overview of traditional techniques of mapping AGB based on ascribing field measurements to vegetation or land cover type classes, and describe the merits and limitations of those relative to recent data mining algorithms used in the context of an approach based on direct utilization of remote sensing measurements, whether optical or lidar reflectance, or radar backscatter. We conclude that while satellite remote sensing has often been discounted as inadequate for the task, attempts to map AGB without satellite imagery are insufficient. Moreover, the direct remote sensing approach provided more coherent maps of AGB relative to traditional approaches. We demonstrate this with a case study focused on continental Africa and discuss the work in the context of reducing uncertainty for carbon monitoring and markets.     

An introduction to the classification of the physiognomic landscape types: methodology and results of testing in the area of Kazimierz Landscape Park (Poland)

The publication of the European Landscape Convention (2000) had a stimulating effect on the development of both new systems of landscape classification and new methods of their evaluation and mapping. As an example, a new classification of physiognomic landscape types was developed in Poland in 2014. The objectives of the paper are to (1) popularize, on the international scale, the classification of physiognomic landscape types in a new, improved version, (2) present the original method of physiognomic landscape types mapping with the use of the system of basic landscape units, and (3) present the results of testing of the method in the area of the Kazimierz Landscape Park, Poland. In the area of the Kazimierz Landscape Park, 491 basic landscape units were delimited, within which, on the basis of the leading traits of land relief and cover forms, the physiognomic landscape types were identified. Maps of this type can be important tools in implementing the recommendations of the European Landscape Convention. The total number of physiognomic landscape types identified within a specific area can be one of the key indicators of landscape diversity.     

Understanding the Past and Present and Predicting the Future: Farmers’ Use of Multiple Nutrient Best Management Practices in the Upper Midwest

Understanding what drives farmers’ voluntary adoption of nutrient and soil best management practices has important consequences for many environmental outcomes including water quality. We build on research revealing the need for simultaneous use of multiple nitrogen best management practices to achieve water quality improvement goals. Using social, economic and attitudinal variables we predict the use of multiple nitrogen best management practices at three time points: current use (2013), past use (before 2013), and likelihood of use on their largest field in the next three years. Our empirical analysis uses structural equation modeling with latent variables and 2014 farmer survey data from three Midwestern US states. Most farmers in our sample used at least one of the six best management practices. Our results reveal that farmers’ attitudes, use of information sources, and conservation program participation affect the number of nitrogen best management practices concurrently in use at multiple time points.     

Subpollen Particles as Atmospheric Cloud Condensation Nuclei

Izvestiya, Atmospheric and Oceanic Physics - Bioparticles constitute a significant fraction of atmospheric aerosol. Their size range varies from nanometers (macromolecules) to hundreds of...